Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Crash entering sleep mode

23 May 2010   #1
mpcrsc562

Windows 7 Ultimate x64
 
 
Crash entering sleep mode

The past few times I have tried to put my PC into sleep mode, I get a crash. The crash has been dxgkrnl.sys. To my knowledge, this has only been happening since I have added my third monitor to my Eyefinity setup. The third monitor uses a passive DisplayPort to VGA adapter. My guess is that something does't quite work right with the ATi drivers when entering sleep. Anyway...

Would anyone adept in reading dumps kindly look thru and see what you can find?


My System SpecsSystem Spec
.
23 May 2010   #2
CarlTR6

Windows 7 Ultimate 32 bit
 
 

This is just a wild guess, I am not really proficient at these analysis yet; but I'm learning. Have a look at this and see if it apples to your hardware setup.

"STOP 0x0000003B" Stop error on a computer that is running Windows 7 or Windows Server 2008 R2 when you use some IEEE 1394 devices
My System SpecsSystem Spec
23 May 2010   #3
mpcrsc562

Windows 7 Ultimate x64
 
 

Thanks Carl for the stab at it, but I don't have any 1394 devices within my system
My System SpecsSystem Spec
.

23 May 2010   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by mpcrsc562 View Post
The past few times I have tried to put my PC into sleep mode, I get a crash. The crash has been dxgkrnl.sys. To my knowledge, this has only been happening since I have added my third monitor to my Eyefinity setup. The third monitor uses a passive DisplayPort to VGA adapter. My guess is that something does't quite work right with the ATi drivers when entering sleep. Anyway...

Would anyone adept in reading dumps kindly look thru and see what you can find?

HI and welcome

These crashes were caused by many things. Because they were I have to think hardware. use these to see what it means and what to try. https://www.sevenforums.com/crash-loc...-what-try.html


Several of these were caused by your video driver, others memory corruption, your USBhub, and cdd.dll. You need to follow the instructions and tell us the results

Ken
Code:
BugCheck 3B, {c0000005, fffff880050a189c, fffff88008b0d740, 0}
Probably caused by : dxgkrnl.sys ( dxgkrnl!VIDPN_MGR::AddFunctionalPathToVidPnTopology+4e4 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck 3B, {c0000005, fffff880056f289c, fffff8800c2a6740, 0}
Probably caused by : dxgkrnl.sys ( dxgkrnl!VIDPN_MGR::AddFunctionalPathToVidPnTopology+4e4 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck 3B, {c0000005, fffff880056a589c, fffff8800ce6f740, 0}
Probably caused by : dxgkrnl.sys ( dxgkrnl!VIDPN_MGR::AddFunctionalPathToVidPnTopology+4e4 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck 1000007E, {ffffffffc0000005, fffff8800578f412, fffff880077f38b8, fffff880077f3120}
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_DEVICE::RemoveCommitment+22 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck D1, {ffffffff800e8011, 2, 0, fffff8800183ccf8}
Probably caused by : memory_corruption
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck FE, {8, 6, 6, fffffa8008d3f000}
Probably caused by : usbhub.sys ( usbhub!UsbhHubProcessChangeWorker+ec )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck FE, {8, 6, 6, fffffa80087ca000}
Probably caused by : usbhub.sys ( usbhub!UsbhHubProcessChangeWorker+ec )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck 50, {fffff900e6bdd7c0, 1, fffff960001b392e, 2}
Probably caused by : cdd.dll ( cdd!DrvBitBlt+1057 )
My System SpecsSystem Spec
23 May 2010   #5
mpcrsc562

Windows 7 Ultimate x64
 
 

The crashes related to usbhub have not persisted as I removed the external 4-port hub that was connected.

The memory corruption has not persisted and was caused when I set my ram to run at 1066mhz. This one was an easy one to resolve as I set the ram freq back to 800mhz.

And, the 0x50 crash has not persisted either. WhoCrashed reported that it was caused by ahcix64.sys... I can't remember if I updated the controller, but no other problems with this one.

As I stated in the first post, the dxgkrnl.sys crash only has happened after using the third monitor in Eyefinity while using the DisplayPort to VGA adapter. I guess I'll either pony up some money for the active DisplayPort to DVI adapter or just stop putting my pc to sleep.
My System SpecsSystem Spec
24 May 2010   #6
mpcrsc562

Windows 7 Ultimate x64
 
 

Thanks Ken.

I was trying to see if you could find more specific info than from what I had already found / assumed.
My System SpecsSystem Spec
Reply

 Crash entering sleep mode




Thread Tools




Similar help and support threads
Thread Forum
Laptop freezes between entering sleep mode to being in sleep mode
Hi, I've had this problem intermittently on my laptop for the past 2 years however it has been occuring more often recently. Basically sometimes when I click the sleep button on Windows 7, the screen fades to black as usual. However the fan keeps running (sounds like when it's on full load) and...
General Discussion
No response(crash) when entering sleep mode or restarting
Hello, often, when I want to put computer into sleep mode or sometimes when I restart it, procedure doesn't finish, display usually turns off, but computer is still running. The only option is to turn it off manually by holding power button. After restarting I have a lot of (15) errors in...
BSOD Help and Support
BSOD when entering Sleep mode
Hello, I recently got a BSOD when I entered Sleep mode. I thought a program which I recently installed caused the problem, but I got another BSOD when I restarted my computer, uninstalled the program and tried entering Sleep mode a second time. My second thought was that the power cut...
BSOD Help and Support
Computer not entering sleep mode
Just recently my computer has not been entering sleep mode. Nothing changed from last week and now it doesn't go. I can select sleep from the start up menu but it instantly turns back on. I went into device manager and deselected all usb and my wireless mouse and keyboard from waking the computer....
Performance & Maintenance
BSOD entering sleep mode
Computer crashes when entering sleep mode. The led blinks for 2 or 3 seconds before the bluescreen. When rebooting Windows displays the crash message. This happens every time the computer attempts to go to sleep mode. Computer shuts down properly. Worked fine until yesterday. Windows 7 Pro Sp1...
BSOD Help and Support
BSOD when entering sleep mode
I am running Windows 7 Home Premium x64 (SP1). For the past few weeks every time I enter sleep mode I get the BSOD: 0x7E hiber_scsiport.sys. I have attached the BSOD files. Can anyone please help me fix this issue?
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 03:28.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App