Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD On Startup

11 Jun 2010   #1
SteelEye

Windows 7 64bit Ultimate
 
 
BSOD On Startup

Typically when I start my machine from a cold start it takes about 5-10 minutes for the computer to BSOD and restart. Once it restarts I can run for days and not get it to BSOD. I've had a few occasions where it would reboot with a BSOD screen, but that didn't seem to happen very often. It has been happening to me for sometime and I have not been able to figure it out. Hopefully your team can make sense of what I'm missing....

Thanks.


My System SpecsSystem Spec
.
11 Jun 2010   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by SteelEye View Post
Typically when I start my machine from a cold start it takes about 5-10 minutes for the computer to BSOD and restart. Once it restarts I can run for days and not get it to BSOD. I've had a few occasions where it would reboot with a BSOD screen, but that didn't seem to happen very often. It has been happening to me for sometime and I have not been able to figure it out. Hopefully your team can make sense of what I'm missing....

Thanks.

50 Crashes might take a while doing them now.



Ken
My System SpecsSystem Spec
11 Jun 2010   #3
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Quote   Quote: Originally Posted by SteelEye View Post
Typically when I start my machine from a cold start it takes about 5-10 minutes for the computer to BSOD and restart. Once it restarts I can run for days and not get it to BSOD. I've had a few occasions where it would reboot with a BSOD screen, but that didn't seem to happen very often. It has been happening to me for sometime and I have not been able to figure it out. Hopefully your team can make sense of what I'm missing....

Thanks.
Hello !! Welcome to SF !!

I guess it might your Antivirus / Firewall might be casuing this. It's a wild guess because there was a service excpetion on svchost.exe usually caused by that. So first thing i would recommend to uninstall it protection completely and also use the Cleanup Tool (Check this thread for the links AV Uninstallers)

Hardware Diagostic: Run the Memory Diagnostic & HD Diagnostic

Also i would recommend to run System Integrity Checker
Start > Run > CMD >Right Click and Run as administrator > SFC/ SCANNOW

Post us back the results

Hope this helps,
Captain
My System SpecsSystem Spec
.

11 Jun 2010   #4
Jonathan_King

Windows 7 Professional x64
 
 

I wonder if your Yukon Ethernet Controller drivers are causing the issue. Please uninstall them, and install a fresh copy.

I agree with Captain- a memory test is in order. Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.

BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Fri Jun 11 18:40:53.148 2010 (GMT-4)
System Uptime: 0 days 0:04:44.272
BugCheck 7F, {8, 80050033, 6f8, fffff88001863e58}
Probably caused by : memory_corruption
BUGCHECK_STR:  0x7f_8
PROCESS_NAME:  svchost.exe
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Thu Jun 10 20:35:16.967 2010 (GMT-4)
System Uptime: 0 days 0:06:53.091
BugCheck D1, {5e, 2, 0, fffff88001873157}
*** WARNING: Unable to verify timestamp for yk62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for yk62x64.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jun  9 20:54:12.811 2010 (GMT-4)
System Uptime: 0 days 0:07:29.935
BugCheck 1E, {ffffffffc0000005, fffff8800170e1cf, 0, ffffffffffffffff}
Probably caused by : memory_corruption
BUGCHECK_STR:  0x1E
PROCESS_NAME:  svchost.exe
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Tue Jun  8 21:40:13.615 2010 (GMT-4)
System Uptime: 0 days 0:07:15.739
BugCheck 1E, {ffffffffc0000005, fffffa800caa2a4c, 1, 0}
Probably caused by : ntkrnlmp.exe ( nt!KiDispatchException+1b9 )
BUGCHECK_STR:  0x1E
PROCESS_NAME:  System
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Mon Jun  7 23:55:44.939 2010 (GMT-4)
System Uptime: 0 days 0:10:15.893
BugCheck 1E, {0, 0, 0, 0}
Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_iMapTransfer+247 )
BUGCHECK_STR:  0x1E
PROCESS_NAME:  System
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Sun Jun  6 03:17:25.105 2010 (GMT-4)
System Uptime: 0 days 0:04:28.798
BugCheck 1000007E, {ffffffffc0000005, fffff8800185c357, fffff880033697f8, fffff88003369060}
Probably caused by : tcpip.sys ( tcpip!IppDeliverListToProtocol+27 )
PROCESS_NAME:  System
BUGCHECK_STR:  0x7E
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Sat Jun  5 21:36:18.181 2010 (GMT-4)
System Uptime: 0 days 0:08:31.305
BugCheck D1, {0, 2, 1, fffff8800171fe6d}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Fri Jun  4 18:32:24.571 2010 (GMT-4)
System Uptime: 0 days 0:02:20.695
BugCheck D1, {1a, 2, 0, fffff8800185de91}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Thu Jun  3 21:43:19.221 2010 (GMT-4)
System Uptime: 0 days 0:05:59.345
BugCheck 109, {a3a039d89cdeb508, b3b7465eef5b86fe, fffff8000300ae40, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
BUGCHECK_STR:  0x109
PROCESS_NAME:  System
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Tue Jun  1 21:10:06.969 2010 (GMT-4)
System Uptime: 0 days 0:06:39.982
BugCheck D1, {f, 2, 0, fffff8800184314c}
*** WARNING: Unable to verify timestamp for yk62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for yk62x64.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ
My System SpecsSystem Spec
11 Jun 2010   #5
SteelEye

Windows 7 64bit Ultimate
 
 

I've run the Memtest that Windows 7 64bit Ultimate has for at least 20 passes while I was asleep one night. It came back clean. So, I couldn't blame ram. (I don't know were the files saves itself to once you boot back into windows or its possible I neglected to save it if there was a chance to)

I had Sophos Anti-Virus installed, but removed that thinking that was causing the issue at one point. Since then I have not reinstalled it. Firewall for windows is disabled.

For the network ports I have done exactly that. I uninstalled the driver and let win7 install a fresh version. I've switched network ports as my board has two network jacks on it. I went to Asus and downloaded the latest drivers for the network ports as a separate test.

I ran the Windows Resource Protection and it did not find any integrity violations.

The only things thats been bugging me about it is if my 850 watt power supply is somehow causing it to do that... but like I said it only does it to me one time usually and is fine after the reboot. Ohh Sometimes the video does not come back up right away or it requires an additional reboot using the power button. I can hear sound when shutting down so I'm not harming my computer in any way.

Programs I do use for clean ups are CCleaner and MalwareBtyes and common sense :P
My System SpecsSystem Spec
11 Jun 2010   #6
Jonathan_King

Windows 7 Professional x64
 
 

Please use Memtestx86 to test. The built-in diagnostic is not very accurate!

For the purposes of troubleshooting please remove your anti-virus and replace it with MSE: http://www.microsoft.com/security_essentials
My System SpecsSystem Spec
12 Jun 2010   #7
SteelEye

Windows 7 64bit Ultimate
 
 

I ran the Memtest for 5 passes and it stated nothing was wrong. I looked for a report function so I could show it said that, but I could not find anything. It ran pretty much all night since yesterday after my last post.

I downloaded/installed Microsoft Security Essentials and ran the scan on that and it came back clean for the initial run. So I have it currently running a full scan right now.
My System SpecsSystem Spec
12 Jun 2010   #8
SteelEye

Windows 7 64bit Ultimate
 
 

Finished running the Full system scan. It came back with nothing. :/
My System SpecsSystem Spec
12 Jun 2010   #9
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by SteelEye View Post
Finished running the Full system scan. It came back with nothing. :/

Just a thought but since it is only on cold boot have you tried a chkdsk??

CHKDSK /R /F:
Run CHKDSK /R /F from an elevated (Run as adminstrator) Command Prompt. Please do this for each hard drive on your system.
When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter. Then reboot and let the test run. It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors. See "CHKDSK LogFile" below in order to check the results of the test.

Elevated Command Prompt:
Go to Start and type in "cmd.exe" (without the quotes)
At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"

CHKDSK LogFile:
Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter
Expand the Windows logs heading, then select the Application log file entry.
Double click on the Source column header.
Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).
Copy/paste the results into your next post.
My System SpecsSystem Spec
12 Jun 2010   #10
Jonathan_King

Windows 7 Professional x64
 
 

Try increasing your RAM voltage slightly.
My System SpecsSystem Spec
Reply

 BSOD On Startup




Thread Tools




Similar help and support threads
Thread Forum
BSOD during windows startup; can't safe mode; startup repair can't fix
Consistent BSOD during Windows startup for both normal mode and safe mode. BSOD problem started shortly after buggy installations of Microsoft Visual C++ 2005 x64, Microsoft .Net Framework 1.1, and AMD Catalyst Drivers 13.9; and turning off Microsoft .Net Framework 3.5.1. Startup Repair is...
BSOD Help and Support
Brief BSOD on Startup, Startup Recovery Hangs
I have Win 7 Home and in the last couple of days I have been trying to do a backup onto an external drive. The problem comes in when I attempt to start my laptop so that I can begin the backup process, the screen flickers a BSOD, says startup failed and do I want to run Startup Recovery. If I say...
BSOD Help and Support
BSOD on startup, unknown error, startup repair running too long
As the title suggests, my Acer Aspire has been running startup repair for over 20 hours following a BSOD yesterday. I'm not sure if it's worth the wait so maybe you all can shed some light. Yesterday I was stressfully trying to search for something (using Chrome) and the website I was on froze;...
BSOD Help and Support
BSOD on Startup - Startup Reapir not working
On Startup, after POST, I get this BSOD: STOP: c000021a {Fatal System Error} The verification of a knownDLL failed. system process terminated unexpectedly with a status of 0xc000012f (0x00360bf0 0x00000000). The system has shut down. Upon Reboot, I am advised to go to the startup repair....
BSOD Help and Support
BSOD at startup, cant repair startup
i had a bsod 3 days ago with no reason when its at Welcome screen and my startup items are not loaded at all(all drivers programs etc.). i tried to reboot and my pc gone wild. it cant even see welcome screen cuz of bsods. also i am having black screens when booting up. sometimes its just freezes...
BSOD Help and Support
BSOD on startup , error 0x000000f4 . startup takes half an hour
so everything was fine when my laptop started to become very slow and i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer ,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

ฉ Designer Media Ltd

All times are GMT -5. The time now is 06:56.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App