OC'ing causes driver problems?


  1. Posts : 14
    Windows 7 Home Premium 64-bit
       #1

    OC'ing causes driver problems?


    I am new to this forum. Please forgive me if this is the incorrect place to post. About two minutes after I started overclocking from 2.4GHz to 2.6GHz, many bsods occured (not all at once; in different boots), including "Bugcode_UsB_Driver", "Corrupt_Driver_MMPOOL" and "DRIVER_IRQL_NOT_LESS_OR_EQUAL." However, when I set the cpu speed to the original setting, I didn't get anymore. It's not that I haven't ever had a bsod or anything, but I just don't see how overclocking the cpu causes these particular problems.
      My Computer


  2. Posts : 1,496
    7 Ultimate x64
       #2

    ECS boards have never been known for their ability to overclock, so it might be that... or it could be insufficient power. 300 watts is low if you're attempting to OC.
      My Computer


  3. Posts : 14
    Windows 7 Home Premium 64-bit
    Thread Starter
       #3

    I'm think that may be the case. I've recently heard from various sources the ECS "sucks". I will probably get an asus board soon if that is the case. Also, if it were power, would it still cause random bsods, or would it just turn off?
    Last edited by ExLt; 16 Jun 2010 at 18:05. Reason: A spelling error, and I didn't ask another question. Didn't want to double post.
      My Computer


  4. Posts : 1,496
    7 Ultimate x64
       #4

    An inadequate PSU could cause both bsod's and shut-offs. Do you happen to know what make and model yours is?
      My Computer


  5. Posts : 14
    Windows 7 Home Premium 64-bit
    Thread Starter
       #5

    I don't, but if I took a look inside would the name be written on it?
      My Computer


  6. Posts : 1,496
    7 Ultimate x64
       #6

    Yeah, the name will be on it, as well as the model number. What you're looking for specifically is the +12 volt amperage.
      My Computer


  7. Posts : 14
    Windows 7 Home Premium 64-bit
    Thread Starter
       #7

    The only thing I can see on it the the word "BFG". Do you know if there is software that is able to identify the power supply? Also, when I tried to overclock again, the bsods stopped. This time, I re-timed the RAM as well, but I don't know if that would solve it.
      My Computer


  8. Posts : 1,496
    7 Ultimate x64
       #8

    Sure, loosening the timings could have resolved the problem. Let's hope that that's all you needed. :)

    I don't know of any software that identifies the psu; not to say that it doesn't exist. Either way, 300 watts is still awfully low for an overclocked machine.
      My Computer


  9. Posts : 14
    Windows 7 Home Premium 64-bit
    Thread Starter
       #9

    It will still crash from time to time (only while overclocking), but now I know it's either the mobo, the PSU or both. Thanks Fumz. Solved
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 09:42.
Find Us