Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD

15 Jun 2010   #11
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by CMurphy3639 View Post
Attached is the minidump files from the verifier restart.

Also, in regards to memtextx86, does it matter that I'm using 64 bit?

Doesnt matter that you are using 64 bit as it is burned to a cd, booted from, and run outside of windows. It is going to take a while but is worth it.


Ken


My System SpecsSystem Spec
.
15 Jun 2010   #12
CMurphy3639

Windows 7
 
 

Ok I'm going to retry the verifier now and then run the memtest86 overnight.
My System SpecsSystem Spec
15 Jun 2010   #13
CMurphy3639

Windows 7
 
 

I tried to rerun the verifier. This is what I got from the Windows Boot Manager:

"Windows failed to start. A recent hardware or software change might be the cause. To fix the problem blah blah blah

Status: 0xc000000e

Info: The boot selection failed because a required device is inaccessible."

So what do I do since I can't even get into safe mode now?
My System SpecsSystem Spec
.

15 Jun 2010   #14
CMurphy3639

Windows 7
 
 

Using the Windows CD, I was able to repair the bootup error that was going on. I tried to load the system restore point from before the verifier but it says system restore is turned off and I got an error when I tried to turn it on.

Also, what should I do about the verifier at this point?
My System SpecsSystem Spec
15 Jun 2010   #15
ttran

Microsoft Window 7 Professional 32 bit
 
 

Hi CMurPhy
thanks for waiting
I just got some advises from Ken (zigzag3143).
Do you have the backup and restore point, if yes, u can boot from DVD and repair. If not, I would suggest to do a clean-install of window 7
Sorry but this is only thing I can think of rightnow
My System SpecsSystem Spec
15 Jun 2010   #16
CMurphy3639

Windows 7
 
 

TTran,

Thanks to you and Ken for all your help, I can see you guys are busy on here and I appreciate you just trying to help.

I was able to do the system repair via my disk, but all my system restore points are gone apparently. I'm back on my desktop at least. Is there any data from the verifier I can get to try and help diagnose what happened or should I just go ahead and do the memory scan overnight and come back tomorrow with the results?
My System SpecsSystem Spec
15 Jun 2010   #17
ttran

Microsoft Window 7 Professional 32 bit
 
 

Go ahead and do memory scan overnight, it might give us interesting results
My System SpecsSystem Spec
15 Jun 2010   #18
CMurphy3639

Windows 7
 
 

Ok, I'll run it overnight and post results tomorrow. I'm curious, what about that verifier would have totally prevented the start up from happening? I thought the verifier just scans?
My System SpecsSystem Spec
15 Jun 2010   #19
ttran

Microsoft Window 7 Professional 32 bit
 
 

yeah, When that happend, usually we restore the system point in order to bring system back to life
My System SpecsSystem Spec
15 Jun 2010   #20
CMurphy3639

Windows 7
 
 

Well I'm guessing because it can't run that there IS DEFINITELY a problem and we can't use the verifier to help us figure out the issue?
My System SpecsSystem Spec
Reply

 BSOD




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:59.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App