Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Crash after logging in.

06 Jul 2010   #21
FuNkYBoY

Windows 7 Ultimate 64-bit (6.1 build 7600)
 
 

OK
Sorry for the late reply.
Attatched is a dump of a few from the past week.. the most RECENT one in the zip is the one that was taken after i followed the instructions for the "Driver Verifier"
Please let me know asap whats the GO? Thanks!


My System SpecsSystem Spec
.
06 Jul 2010   #22
FuNkYBoY

Windows 7 Ultimate 64-bit (6.1 build 7600)
 
 

Ahh!
Wait a second i just got a whole new crash error.
After posting my last comment through Safe Mode.. i rebooted and let windows load normally.
Logged in and as the "Windows login sounds" played i got a BSOD with the following.
My System SpecsSystem Spec
06 Jul 2010   #23
FuNkYBoY

Windows 7 Ultimate 64-bit (6.1 build 7600)
 
 

Gonna do a system restore because i'm noticing that as i try to load windows updates, the machine just wants to crash more and more.
It's really getting to the stage that i feel i should just reformat and start again.. BUT who's to say these crashes wont just simply happen again after a reinstall due to the fact if its drivers for certain things, they will just fail again?
My System SpecsSystem Spec
.

06 Jul 2010   #24
reventon

Windows 7 x64, Windows XP SP3, Fedora
 
 

Quote:
It's really getting to the stage that i feel i should just reformat and start again.. BUT who's to say these crashes wont just simply happen again after a reinstall due to the fact if its drivers for certain things, they will just fail again?
If you do reformat then do not install any programs/drivers immediately after you reformat (windows inbuilt drivers can keep your system running by themselves) - install them one at a time over the course of a week (or more) and see when you start to get problems.

I will look at your dump files soon.
My System SpecsSystem Spec
06 Jul 2010   #25
reventon

Windows 7 x64, Windows XP SP3, Fedora
 
 

Hi,

Code:

BugCheck 1E, {ffffffffc0000005, fffff80003740795, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!HvpFindFreeCellInThisViewWindow+45 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck 3B, {c0000005, fffff800036f8795, fffff88007545d10, 0}
Probably caused by : ntkrnlmp.exe ( nt!HvpFindFreeCellInThisViewWindow+45 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck 1E, {ffffffffc0000005, fffff800036ee795, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!HvpFindFreeCellInThisViewWindow+45 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck 1E, {ffffffffc0000005, fffff800036e8795, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!HvpFindFreeCellInThisViewWindow+45 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck 1E, {ffffffffc0000005, fffff80003742795, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!HvpFindFreeCellInThisViewWindow+45 )
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
All Memory Corruption Errors - still all crashing on the same instruction nt!HvpFindFreeCellInThisViewWindow+45

Some things I noticed this time around:

1. You have Avast installed. We have seen that cause BSODs before so I recommend you uninstall it to be safe
Quote   Quote: Originally Posted by jcgriff2
Download the Avast Removal Tool (ART) from here -> save to desktop.

Boot into SAFEMODE - NO Networking. Then go to desktop, RIGHT-click on the ART icon and select Run as Administrator.

When complete - re-boot.

Install MS Security Essentials --> http://www.microsoft.com/Security_Essentials/

Then reset the Windows Firewall to its default settings -
START -> type cmd.exe -> right-click -> run as administrator -> type netsh advfirewall reset press enter
2. You have Daemon Tools and SPTD.sys installed - same thing applies there; we have seen it cause BSODs so uninstall it to make sure it is not the problem

Remove Daemon Tools normally, then run this SPTD installer and select the Uninstall option: DuplexSecure - Downloads

3.
The following drivers:

Code:

AsIO.sys     Mon Aug 03 19:03:16 2009
nvoclk64.sys Wed Sep 05 14:26:33 2007
Top one is part of various ASUS Hardware Monitoring and Overclocking software - remove any of that software that you have.

Bottom one is part of Nvidia's nTune. Try updating the software first, and we will see how it goes. Remove it if you never use it.

4. With all the mention of memory corruption there is a chance that the RAM is faulty. Have you run a full memtest yet? (not the Windows one)
Quote   Quote: Originally Posted by reventon
Memtest - Instructions:

Download the ISO (or the .exe for USB drives) from here Memtest86+ - Advanced Memory Diagnostic Tool

Then (if you have chosen the ISO) burn the ISO using ImgBurn: The Official ImgBurn Website

Boot from the CD/USB and run the test (at least 7 passes per test) with only one stick of RAM in place at a time.

It is a time consuming process but it is the only way to be sure it isn't a RAM fault.

For your final test, run the test with all the RAM in place.
5. I re-read the entire thread and you mention O/Cing your PC. Undo all overclocking that you have done - both to the CPU and GPU.

6. If all of the above fails to stop the BSODs then run a graphics stress test to see if your graphics card is faulty.
Quote   Quote: Originally Posted by usasma
FurMark Setup:
Download from here: FurMark: Graphics Card Stability and Stress Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit
7. I note that you thought your PSU could be causing the issue. I think this is unlikely given the similarity of the BSODs (with a faulty PSU they are usually all over the place). I would like to know what model you are using anyway.

Regards,
Reventon
My System SpecsSystem Spec
06 Jul 2010   #26
FuNkYBoY

Windows 7 Ultimate 64-bit (6.1 build 7600)
 
 

"2. You have Daemon Tools and SPTD.sys installed - same thing applies there; we have seen it cause BSODs so uninstall it to make sure it is not the problem

Remove Daemon Tools normally, then run this SPTD installer and select the Uninstall option: DuplexSecure - Downloads"

I've been able to remove the Daemon tools as per the normal uninstall.
Though windows reported the program as not being installed correctly afterwards?

I then went to the next step of downloading the SPTD.sys installer and running that for my version of windows but when i run the file it comes up saying its "not a valid win32 application"
I tried both the 32bit and 64bit version with the same error, so i cannot run that program to uninstall the SPTD.sys file.

"5. I re-read the entire thread and you mention O/Cing your PC. Undo all overclocking that you have done - both to the CPU and GPU."

Yes that's correct, i "tried".. nothing ever saved and everything is at default settings.


nvoclk64.sys Wed Sep 05 14:26:33 2007
The nVidia ntune software i've been running this for a long time now, well before any of these BSOD's ever showed up.
Only reason i run it, is because the default nVidia software/drivers fails to actually turn my GPU fan on to the correct speed when the GPU starts to get hot.. nTune allows me to take manual control of the fan speed so i can set a % for it for when the GPU is at certain tempreatures.

There's no "current" version that i am aware of, i have searched multiple times and i think that the nVidia dev's have not bothered to make a Win 7 64bit as of yet.
My System SpecsSystem Spec
06 Jul 2010   #27
FuNkYBoY

Windows 7 Ultimate 64-bit (6.1 build 7600)
 
 

"7. I note that you thought your PSU could be causing the issue. I think this is unlikely given the similarity of the BSODs (with a faulty PSU they are usually all over the place). I would like to know what model you are using anyway."

my PSU is a Silverstone 660W PSU.

One thing a bit off topic to power supply but made me think of that because of friends experiences is with my DVD Drive lately, it has been acting weird, occasionally it will not take a DVD/CD when i put it in there, it spits it back out straight away.
It's only happened once now but, i noticed the other day it was making strange noises and having problems spinning the Discs up.

I also noticed sometimes with my machine after a crash or a straight cold boot, my fans will speed up and slow down over and over again, nothing will post to my screen and the machine will not go any further.
I have to either restart a couple of times or power the machine down and start again.
Once again this is not common and does not happen "all the time"
My System SpecsSystem Spec
06 Jul 2010   #28
reventon

Windows 7 x64, Windows XP SP3, Fedora
 
 

There is an update for nTune but they do not call it nTune anymore. See if it does what you need it to.

You can find it here: NVIDIA DRIVERS 6.06

I am really suspicious of nTune because I know it includes software that modifies how Windows deals with program windows and other GUI aspects.

And notice again what the instruction is that crashes each time: nt!HvpFindFreeCellInThisViewWindow+45

The mention of Find Free Cell In this View Window sounds pretty GUI to me.
My System SpecsSystem Spec
07 Jul 2010   #29
FuNkYBoY

Windows 7 Ultimate 64-bit (6.1 build 7600)
 
 

Cool thanks mate i'll try those other ones instead..
Hopefully by removing a few things and getting drivers and what not up to date or to the correct ones, these problems should go away.
The ram i'm currently running is Corsair XMS 4GB (2x2GB) Twin-X DDR2 800Mhz ram.
I know my board supports up to DDR 1066Mhz, so once i do some tests, if the ram does show signs of corruption i'll upgrade it to that.. Any suggestions on good stable RAM? or do they end up all being the same in the end..
My System SpecsSystem Spec
07 Jul 2010   #30
reventon

Windows 7 x64, Windows XP SP3, Fedora
 
 

Quote:
The ram i'm currently running is Corsair XMS 4GB (2x2GB) Twin-X DDR2 800Mhz ram.
I know my board supports up to DDR 1066Mhz, so once i do some tests, if the ram does show signs of corruption i'll upgrade it to that.. Any suggestions on good stable RAM? or do they end up all being the same in the end..
Corsair is pretty good - just return it to Corsair for a replacement if you find faults in the memtest.
My System SpecsSystem Spec
Reply

 BSOD Crash after logging in.




Thread Tools




Similar help and support threads
Thread Forum
bsod when logging in
as per instructions i shall upload the zip file and a picture of the bsod any assistance wil help
BSOD Help and Support
BSOD and windows crash Error: 0x000000F4 no crash files.
Hello everyone I have been trying to fix my PC for the last two weeks. I've tried everything. Windows clean install a bunch of test on my hard drive. I've checked S.M.A.R.T done an 9 hour memtest and I;ve finally given up. I honestly don't know what to do this is a fairly new build done in June. I...
BSOD Help and Support
system hangs after logging off and logging back!
hi! I logged off and logged back in.My system displays a black screen and doesn't log back in.It freezes and doesn't log back in. Help would be appreciated. mahesh
Performance & Maintenance
BSOD after logging in.
Logs in alright but then it seems to bsod after x64 Original installed OS OEM Asus 50ip, probably about 3-4years old Havent changed the OS since purchase Attempted to do the perfmon/report but i got
BSOD Help and Support
BSOD when logging in...
Hi, Brand new 64bit computer (2months old) I keep crashing when Logging in on normal mode. I could access in safe mode mode. I would be really grateful if anybody could help. attached .dmp in .zip file. Thank you.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 16:03.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App