Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSoD - Out of Ideas

22 Jun 2010   #1
CampbellB

Windows 7 Professional 64 bit
 
 
BSoD - Out of Ideas

Hey guys I have had to come to you I am at my wits end trying to work this out.

System Specifications

Windows 7 Professional 64 bit
This is a custom built box.
The OS running is a MSDN license from my University with the ISO image obtained from the University aswell.

The CPU, Mobo, RAM, PSU and 1 HDD (OS is on this one) is 2 months old.
GPU and 2 other HDD's are about 1 year old.

CPU is an Intel i7 930.
GPU is 9800GTX.
Mobo is an Asus P6T.
PSU is a thermaltake Evo Blue 650w
RAM is OCZ DDR3 3x2GB 1600mhz (ocz3x1600r2lv6gk)


The blue screens have a slight pattern in that they generally happen within the first 5 to 10 mins of booting up cold, it will then normally run fine for hours.

Troubleshooting steps applied

SFC /scannow returns no errors

chkdsk /f /r returns no errors on any disk

OS has been reinstalled with another Image from work BSODS still persist.
(all dmp files are from this install)

Memtest scans receive no errors. (Last scan was for a 16 hour period)

Verifier has been turned (as per post instructions) on no BSODS as a result.

I have set the following settings as per OCZ's instructions for the RAM.
(was BSOD before these settings too)
Set AI Overclock Tuner to {Manual}
Set DRAM Frequency to {1600}
Set QPI/DRAM Core Voltage to {1.35 volts}
Set DRAM Bus Voltage to {1.65 volts}

Set DRAM Timing Control to {Manual}
Set DRAm Timings to CL 8-8-8-24 (CL-TRCD-TRP-TRAS)
Set DRAM Ref Cycle Time to {88 DRAM Clocks}
Set DRAM Timing Mode to {2N}
(these have since been turned off after no change was noticed)

Check for bent CPU pins on mobo (OCZ advice)

Future Trouble Shooting Steps

Test each RAM stick individually (I am currently running MEMTEST on the second stick now, no reported errors on first or second yet)

RMA the RAM


I just want to see if there is any thing i have missed or whether the experts can gather more from the .dmp files then i can't see.

Attached is a heap of Diagnostics and .dmp files.

Let me know if you need to know anything else.
Thanks in advance for your help, i just cant work it out.

- Campbell


My System SpecsSystem Spec
.
22 Jun 2010   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by CampbellB View Post
Hey guys I have had to come to you I am at my wits end trying to work this out.

System Specifications

Windows 7 Professional 64 bit
This is a custom built box.
The OS running is a MSDN license from my University with the ISO image obtained from the University aswell.

The CPU, Mobo, RAM, PSU and 1 HDD (OS is on this one) is 2 months old.
GPU and 2 other HDD's are about 1 year old.

CPU is an Intel i7 930.
GPU is 9800GTX.
Mobo is an Asus P6T.
PSU is a thermaltake Evo Blue 650w
RAM is OCZ DDR3 3x2GB 1600mhz (ocz3x1600r2lv6gk)


The blue screens have a slight pattern in that they generally happen within the first 5 to 10 mins of booting up cold, it will then normally run fine for hours.

Troubleshooting steps applied

SFC /scannow returns no errors

chkdsk /f /r returns no errors on any disk

OS has been reinstalled with another Image from work BSODS still persist.
(all dmp files are from this install)

Memtest scans receive no errors. (Last scan was for a 16 hour period)

Verifier has been turned (as per post instructions) on no BSODS as a result.

I have set the following settings as per OCZ's instructions for the RAM.
(was BSOD before these settings too)
Set AI Overclock Tuner to {Manual}
Set DRAM Frequency to {1600}
Set QPI/DRAM Core Voltage to {1.35 volts}
Set DRAM Bus Voltage to {1.65 volts}

Set DRAM Timing Control to {Manual}
Set DRAm Timings to CL 8-8-8-24 (CL-TRCD-TRP-TRAS)
Set DRAM Ref Cycle Time to {88 DRAM Clocks}
Set DRAM Timing Mode to {2N}
(these have since been turned off after no change was noticed)

Check for bent CPU pins on mobo (OCZ advice)

Future Trouble Shooting Steps

Test each RAM stick individually (I am currently running MEMTEST on the second stick now, no reported errors on first or second yet)

RMA the RAM


I just want to see if there is any thing i have missed or whether the experts can gather more from the .dmp files then i can't see.

Attached is a heap of Diagnostics and .dmp files.

Let me know if you need to know anything else.
Thanks in advance for your help, i just cant work it out.

- Campbell

Campbell Hi and welcome

I only did the 5 most recent and they do still point to memory corruption. When you ran memtest were you running one stick of ram at a time, and one mobo slot at a time as well?

I also assume you arent overclocking, or under volting.

Try running memtest again using one slot and one stick


Ken

Code:
BugCheck 3B, {c0000005, fffff800028e3c83, fffff88008961ed0, 0}
Probably caused by : memory_corruption
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck A, {fffff8800b2e14e0, 0, 0, fffff8000295bc7d}
Probably caused by : memory_corruption
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
BugCheck A, {fffff80027d400ef, 2, 0, fffff8000298bc83}
Probably caused by : memory_corruption
My System SpecsSystem Spec
23 Jun 2010   #3
CampbellB

Windows 7 Professional 64 bit
 
 

Hey Ken,

The initial MEMTEST was with all RAM in which resulted in no errors.

I am currently in the process of testing each RAM dimm individually in the same mobo slot.

Test Results so far:

RAM stick 1 : 8 hours of testing No Errors
RAM stick 2 : Currently Testing
RAM stick 3 : No tested yet

I will have the full results by tomorrow morning. If none result in an error i will then test the Slots individually to check the motherboard.

And nothing is overclocked or underclocked at this moment the only change I did too was mentioned in the initial post which has since been reverted since it changed nothing.

Thanks for your help.

- Campbell
My System SpecsSystem Spec
.

23 Jun 2010   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by CampbellB View Post
Hey Ken,

The initial MEMTEST was with all RAM in which resulted in no errors.

I am currently in the process of testing each RAM dimm individually in the same mobo slot.

Test Results so far:

RAM stick 1 : 8 hours of testing No Errors
RAM stick 2 : Currently Testing
RAM stick 3 : No tested yet

I will have the full results by tomorrow morning. If none result in an error i will then test the Slots individually to check the motherboard.

And nothing is overclocked or underclocked at this moment the only change I did too was mentioned in the initial post which has since been reverted since it changed nothing.

Thanks for your help.

- Campbell


Let me go back and run the rest to see if there is some other problem.
My System SpecsSystem Spec
23 Jun 2010   #5
Jonathan_King

Windows 7 Professional x64
 
 

Please enable driver verifier: Using Driver Verifier to identify issues with Drivers

What anti-virus are you running?
My System SpecsSystem Spec
Reply

 BSoD - Out of Ideas




Thread Tools




Similar help and support threads
Thread Forum
New PC! BSoD 0x0000003b - Any ideas? :(
Hey all, new guy here! :) So I got a new PC from newegg.com... you can see all its details here Newegg.com - iBUYPOWER Gamer Supreme NE985SLC Desktop PC Intel Core i7 3770k(3.50GHz) 16GB DDR3 2TB HDD Capacity NVIDIA GeForce GTX 680 2GB Windows 7 Home Premium 64-Bit In the past I've always...
BSOD Help and Support
BSOD's - Any ideas?
Hi all, Since installing and attempting to play Battlefield 3 I've been getting crashes and the odd BSOD. I ran memtest overnight and found 500+ errors. Ran tests 1, 2 & 3 - 3 overnight. After this I restarted and got the BSOD with ntfs.sys as the problem. No problems up until Battlefield...
BSOD Help and Support
Help w/ BSOD's please.. out of ideas...
I'm running Windows 7 64 bit... it is not OEM. I installed it fresh over a clean hard drive a few months ago. The laptop is a Gateway P-7811fx. It's about 3 years old and it a gaming laptop with a dedicated GPU. Since the issues began I have run extensive MemTests, DriveSweeper, and...
BSOD Help and Support
BSOD - All out of ideas
Is Windows 7 . . . - x64 - is the originally installed OS on the system. - an OEM. - This system is approximately nine months old. - This operating system was installed nine months ago. Attached are the files generated by the BSOD Dump & System File Collection app.
BSOD Help and Support
BSOD - any ideas?
I've recently started to get BSOD but haven't made any changes to my system. It was happening once a week or so but has now happened twice in two days... Any ideas please? Thanks, Leon
Hardware & Devices
BSOD I'm Out of Ideas
I've read the instructions and attached the memory dump in a zip. I cannot seem to find the second of these two problems. I've searched for it and went to the temp folder but only found similar WER files. Files that help describe the problem: C:\Windows\Minidump\121909-60606-01.dmp ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 22:19.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App