Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 3 Different BSODs

02 Jul 2010   #31
ttran

Microsoft Window 7 Professional 32 bit
 
 

Quote:
STOP 0x0000004E: PFN_LIST_CORRUPT

Usual causes: Device driver, ?memory
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA

Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
STOP 0x0000001A: MEMORY_MANAGEMENT

Usual causes: Device driver, memory, kernel
You said that if you run memtestx86 with 2 ram together-->error, but run individual (no matter which slots)-->no error?, if that is the case, I guess this is compatibility issue with the 2 sticks of Ram

Code:
BugCheck 4E, {99, 8fd8b, 2, 8f18a}

Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

Followup: MachineOwner
---------
BugCheck 50, {fffff680005fdc08, 0, fffff80002899957, 2}


Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiDeleteAddressesInWorkingSet+11b )

Followup: MachineOwner
---------
BugCheck 1A, {41282, fffffa8006572ec8, 3ffe0015, 1a}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+1feb6 )

Followup: MachineOwner
---------



My System SpecsSystem Spec
.
02 Jul 2010   #32
Scorpion1031

Windows 7 Pro 64 bit
 
 

I am thinking it is a compatibility thing with my motherboard and ram. I am going to trudge around the G. Skill forums to see if there is anything I can do.
My System SpecsSystem Spec
02 Jul 2010   #33
zigzag3143

Win 8 Release candidate 8400
 
 

We keep analyzing and keep saying memory. Time after time the DMP's point to memory. Nothing more needs to be said.

Ken
My System SpecsSystem Spec
.

02 Jul 2010   #34
Scorpion1031

Windows 7 Pro 64 bit
 
 

Yes I know, we have narrowed it down to memory, but I run Memtest on each stick regardless of the mem slot in the mobo and it will run all night just fine, 0 errors, 8+ loops, but with both plugged in it resets memtest, so upon doing further research I think it is a compatibility issue between the mobo and the RAM.

I am going to do a bit of research and I will report back as soon as something comes up.
My System SpecsSystem Spec
07 Jul 2010   #35
Scorpion1031

Windows 7 Pro 64 bit
 
 

Ok so I have results.

So after I left on my own research adventure I went over to the G. Skill forum and did some reading over there. The G. Skill people said I should RMA the memory because of the Memtest86 results. Well I did some research into the current version of Memtest86 (3.5) and it explicitly says that it does not support 4 or more GB of RAM, so if you are testing on it with more than 4GB it could error and reset (which is what it was doing to me). So I ran v3.4 and it ran fine with both sticks.

After that I did a little bit more research and found that my mobo doesn't like to run G.Skill RAM dual channel with 2 sticks. So I decided to try to put them on the same channel (either slots 1&3 or 2&4 on my board). I did that, went into the BIOS, set the BIOS to "Load Optimal Defaults" and it has been running without a BSOD for 3 days.

I was thinking that I would get performance problems by running the 2 sticks on one channel, but I haven't noticed anything yet. Talking to the G.Skill Tech team they said that the only performance dip you will see is if you are running the RAM overclocked, even then it is almost negligible.

I will report back if there are any problems I come across, but so far things are looking good.
My System SpecsSystem Spec
08 Jul 2010   #36
ttran

Microsoft Window 7 Professional 32 bit
 
 

wow..that sounds like an adventure. I'm happy to hear that you haven't got BSOD so far with your try. I don't have much knowledge with hardware stuff so anything you said was very interesting.

Good Luck

Tuan
My System SpecsSystem Spec
Reply

 3 Different BSODs




Thread Tools




Similar help and support threads
Thread Forum
Lenovo T440s, multiple BSODs. Hardware replaced but BSODs continue
Thanks in advance for any advice. The BDODs appear to be of multiple types. Motherboard, RAM, wireless card and SSD were all replaced in early October and system completely reinstalled but BSODs continue. They are more likely to occur 1-2 min after waking from sleep, but recently also occurred...
BSOD Help and Support
please help.. BSODs :(
Hi All, I tried to do everything but I'm still getting BSODs... I uninstalled the ati driver, used also driver sweeper and installed the latest one from the official site. But it's even worse than ever before... I'm really lost and need some help. Thanks so much in advance for any comments...
BSOD Help and Support
BSODs, lots of BSODS
Hi, The blue screen of death are coming with win32k.sys, at first then irql_not_less_or_equal. I have win7 64 bit, clean installed like 1 year or so back. The dell hardware I bought was almost 2 years back but was fully replaced, motherboard, cpu except hardrive 6 months back. It is...
BSOD Help and Support
Help with BSODs
Any help is appreciated, hopefully there is data in here to determine which driver is causing the blue screens. - Windows 7 Home Premium 64bits - This PC is a little more than 1 year old, and was upgraded from a pre-installed Vista using the upgrade CDs from the manufacturer . - BSODs started...
BSOD Help and Support
BSODs FTW
Background.. built a custom PC June 14 2010.. shortly after started getting BSODs. Made sure all drivers were up-to-date.. ran several different system tests including memtest for 14 hours. No problems detected... and thats it.. file is attached per captains instructions. Ran Burnintest for 11...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:57.
Twitter Facebook Google+