Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: i7 920 BSOD Diagnostics

12 Jul 2010   #1
Westie69

Win 7
 
 
i7 920 BSOD Diagnostics

Hi guys i need some help i am currently running my i7 with these settings and its almost there!

20 Passes or Intel Burn test pass every time
prime95 small fft only checked for 1-2hrs but thats fine
playing games is fine

but when i come to encode this one film with handbrake i get a bsod every time and im not sure if its my oc heres my set up hope you can help....

Code:
Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[181]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1451MHz]
UCLK Frequency.........................[2903MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.22500]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.23125]
IOH Voltage............................[1.20]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.66]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]




My System SpecsSystem Spec
.
12 Jul 2010   #2
reventon

Windows 7 x64, Windows XP SP3, Fedora
 
 

Hi,

Please follow these instructions: https://www.sevenforums.com/crashes-d...tml#post836073

Post the resulting .zip file here

There is a possibility that a driver is at fault, but it is far more likely that it is your OC.

Regards,
Reventon
My System SpecsSystem Spec
12 Jul 2010   #3
Westie69

Win 7
 
 

MiniDump & Diag Report Attached
My System SpecsSystem Spec
.

12 Jul 2010   #4
Westie69

Win 7
 
 

any ideas?? i think its down to my oc settings can any of the guru's point out what i could do to try to stabilize my system?
My System SpecsSystem Spec
14 Jul 2010   #5
reventon

Windows 7 x64, Windows XP SP3, Fedora
 
 

Hi,

BUGCHECK SUMMARY
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Mon Jul 12 13:43:10.536 2010 (GMT+12)
System Uptime: 0 days 3:43:33.938
BugCheck A, {abf7d3, 2, 8, fffff80002c8ec9a}
Probably caused by : win32k.sys ( win32k!RawInputThread+6ed )
BUGCHECK_STR:  0xA
PROCESS_NAME:  csrss.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
As a MS driver is mentioned it is likely that you have a hardware or overclocking problem.

I am not an overclocking expert, I will see if I can find someone else who knows what they are about.

Attacking it from the software side; what you can do for now is get rid of this driver from your system.
Code:

ASACPI.sys   Mon Mar 28 15:30:36 2005
sptd.sys     Mon Oct 12 09:55:14 2009
ASACPI.sys - ASUS ACPI Driver; near guaranteed to cause BSODs on Windows 7 systems. Update link here, update instructions (slideshow) here (note that in the last step you select the ATK0110 driver in the list instead of the one mentioned)

sptd.sys -Notorious for causing BSODs; remove Daemon Tools, then use this SPTD installer to remove it (pick the uninstall option): DuplexSecure - Downloads

What I would do in your case is "undo" the overclock and see if the issues still remain. This will show if it is a just a general hardware error or overclock specific.

Regards,
Reventon
My System SpecsSystem Spec
Reply

 i7 920 BSOD Diagnostics




Thread Tools




Similar help and support threads
Thread Forum
BSOD putting to sleep - DM_Log_collector, SF-Diagnostics fail
After several years of solid service my machine is beginning to show errors. Most consistent is a BSOD every time I try to put it to sleep (S3 hybrid). Reading a crash dump I see that NTOSKRNL.EXE is the last to run. Unfortunately DM_Log_Collector fails. Attempting to run it produces"...
BSOD Help and Support
BSOD Errors about IRQL not equal. Diagnostics in Message.
BSOD issue. Here is the error message for the event after I rebooted. Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional information about the problem: BCCode: d1 BCP1: 0000000000000094
BSOD Help and Support
BSOD for unknown reason, error 0x1000009f, diagnostics attached
Help would be much appreciated in figuring out how to deal with this BSOD. I'm a very loyal PC user, help me to keep hating on macs :)
BSOD Help and Support
BSOD (SF Diagnostics Tool is Not Working)
Hi I d/l SF diagnostics, but, it freezes up, so I have uploaded the .DMP file in a zipped folder.
BSOD Help and Support
BSOD and help with windows memory diagnostics
Hi, I have recently been having random blue screens of death and i downloaded the Windows memory diagnostic tool, ran the diagnostics tool (http://oca.microsoft.com/en/windiag.asp) and a few things happened: 1- It threw up a message before the scan saying then memory map could not work with 4gb...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 20:22.
Twitter Facebook Google+