Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD on New Build.

20 Jul 2010   #11
Jujx

Windows 7
 
 

This dump happened 8 minutes after the last one I posted. Have been running smoothly since then. About 6-7 hours. Could someone take a quick look at this please? Driver verifier still enabled. Thanks!


My System SpecsSystem Spec
.
21 Jul 2010   #12
Jujx

Windows 7
 
 

Latest three minidumps. Need some major help! please!
My System SpecsSystem Spec
21 Jul 2010   #13
Jujx

Windows 7
 
 

Can anyone tell me if I formatted my post wrong or didnt include a necessary file? Wondering why everyone else is getting replies on their threads and im not. >.<
My System SpecsSystem Spec
.

21 Jul 2010   #14
Tews

64-bit Windows 8.1 Pro
 
 

Looking now...
My System SpecsSystem Spec
21 Jul 2010   #15
Tews

64-bit Windows 8.1 Pro
 
 

All three .dmp files are the same and blame ntkrnlmp.exe as the cause.. As this is a core system file and not the real cause.

Enable driver verifer by following these instructions..

here's the procedure:

- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

You also have a BugCheck 3B, {c0000005, fffff80002e87805, fffff88006d79fa0, 0} which is a memory exception .... Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder. Boot from the CD, and leave it running for at least 5 passes.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\Minidump\072110-18408-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02e14000 PsLoadedModuleList = 0xfffff800`03051e50
Debug session time: Wed Jul 21 01:09:29.753 2010 (UTC - 4:00)
System Uptime: 0 days 0:23:22.111
Loading Kernel Symbols
...............................................................
................................................................
..................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff80002e87805, fffff88006d79fa0, 0}

Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )

Followup: MachineOwner
---------
My System SpecsSystem Spec
21 Jul 2010   #16
Jujx

Windows 7
 
 

Does Verifier stay enabled until manually being turned off? if so I enabled and have been running with it since Capt. Sparrow recommended it. I re ran a system health report and BSOD and included it with this reply. Thank you so much for your reply Tews.

BTW: My system has been significantly more stable since removing the software Capt. Recommended.
My System SpecsSystem Spec
21 Jul 2010   #17
Jonathan_King

Windows 7 Professional x64
 
 

It appears your Yukon network adapter drivers are the cause. Please uninstall them and install a fresh, updated copy.

...Summary of the Dumps:
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jul 21 05:09:28.833 2010 (UTC - 4:00)
System Uptime: 0 days 0:40:14.830
BugCheck 1E, {ffffffffc0000005, fffff8800629b8c0, 0, 0}
*** WARNING: Unable to verify timestamp for yk62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for yk62x64.sys
Probably caused by : yk62x64.sys ( yk62x64+18dbe )
BUGCHECK_STR:  0x1E_c0000005
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME:  System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jul 21 02:12:59.073 2010 (UTC - 4:00)
System Uptime: 0 days 0:52:37.431
BugCheck 1000007E, {ffffffffc0000005, fffff8000311f28c, fffff880031689c8, fffff88003168230}
Probably caused by : ntkrnlmp.exe ( nt!CmpDelayCloseWorker+98 )
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME:  System
BUGCHECK_STR:  0x7E
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Wed Jul 21 01:09:29.753 2010 (UTC - 4:00)
System Uptime: 0 days 0:23:22.111
BugCheck 3B, {c0000005, fffff80002e87805, fffff88006d79fa0, 0}
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR:  0x3B
PROCESS_NAME:  SearchIndexer.
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
  
  
 
My System SpecsSystem Spec
21 Jul 2010   #18
Jujx

Windows 7
 
 

Should I do the memtest before or after the verifier?
My System SpecsSystem Spec
21 Jul 2010   #19
Tews

64-bit Windows 8.1 Pro
 
 

First remove the driver that Jonathan has suggested, then see what happens... It may be that driver verifier will not be needed... then run memtest..
My System SpecsSystem Spec
21 Jul 2010   #20
Jujx

Windows 7
 
 

I removed and reinstalled it from the MOBO setup CD.
My System SpecsSystem Spec
Reply

 Multiple BSOD on New Build.




Thread Tools




Similar help and support threads
Thread Forum
Multiple BSOD's/Errors on new build
I just built my first desktop and am getting regular BSOD's. They seem to be occurring at any point where the system would access RAM. I have, however, successfully installed Windows 7 Ultimate x64 and programs such as Chrome and itunes without issue. I have attached a collection of my minidump...
BSOD Help and Support
Multiple BSOD - Fresh PC Build
Hi guys! Been fighting with some issues on my freshly assembled PC. I've gotten a TON of BSOD that I haven't been able to track the cause of myself. The operating system is Windows 7 x64 that's only about a week old with only essentials installed. All drivers/programs up to date. System Specs: ...
BSOD Help and Support
Multiple BSOD errors on brand new build.
A few weeks ago i build an entire new gaming desktop. At first all was fine but recently i started getting different blue screens. The errors i have gotten are 0x000007e 0x000001e 0x0000050 I have run 8 passes of memtest86+ with no errors. Attached are a zip of my dmp files. Thanks.
BSOD Help and Support
Multiple various BSOD's on new build
Hello, Got to be quick because I've already had a BSOD trying to post this. This is a new build. All new components. All kinds of error codes contantly. I've updated Bios, SSD firmware, all drivers I can find, did a clean reinstall of Win7, ran memtest86 twice (20 passes total) on both sticks...
BSOD Help and Support
BSOD multiple times every day on a new build
Already crashed 2 times today in 30 minutes. The first time i was just browsing, the second time i was playing Skyrim. This happens randomly every day. Windows 7 x64 This is what what i got from my latest crash. Problem signature: Problem Event Name: BlueScreen OS...
BSOD Help and Support
Multiple BSOD's on new build
System Info: Windows 7 Ultimate 64-bit SP1 AMD Phenom II X4 955 Black Edition Gigabyte GA-970A-UD3 Corsair 2x2GB DDR3 1333MHz XFX HD 6870 1GB GDDR5 Samsung SpinPoint F3 500GB Sometimes it's happened randomly, two or 3 times it's when im shutting down.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 21:04.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App