Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Display scaling issue (not just in Windows)

30 Jun 2009   #1
BCXtreme

Windows 7 Home Premium x64
 
 
Display scaling issue (not just in Windows)

Hey,

I recently bought a Sony VAIO All-in-One Desktop/HDTV (this is NOT the computer that I put in for my system specs on this site). It has a 24" display that runs at 1920x1200 natively.

Whenever it displays the Windows 7 loading screen or the BIOS (both around 800x600), the actual display's resolution does not change from 1200p. Same problem occurs if I lower Windows' display resolution The result is that rather than stretching the picture to fit the screen, the picture is instead displayed in a small area in the middle of the screen, with a black letterbox on all sides.

Every other computer I've ever worked with will stretch lower resolutions to fit the display. How do I get this computer to do that instead of just making the on-screen picture smaller?

Thanks for any help you can offer,
- Phil

P.S. I posted this in the "Chillout Room" because it doesn't seem to have anything to do with Windows 7. If there's a better place to put it, please let me know.
My System SpecsSystem Spec
01 Jul 2009   #2
smarteyeball

 
 

Look for a Aspect ratio/1:1/Fill setting in either your cards control panel or on the TV itself. It sounds like it's defaulting to 1:1 ratio which will give you borders etc.
My System SpecsSystem Spec
01 Jul 2009   #3
BCXtreme

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by smarteyeball View Post
Look for a Aspect ratio/1:1/Fill setting in either your cards control panel or on the TV itself. It sounds like it's defaulting to 1:1 ratio which will give you borders etc.
The Intel GMA control panel has a place to choose aspect ratio settings, but the only one listed is the one I'm already on: "Center". I checked all over the unit itself, but I couldn't find any buttons, switches, or even OSD menu options relating to aspect ratio. I can't figure out why the Intel control panel isn't giving me any other options ... even if it did, would this fix the incorrect display outside of Windows?
My System SpecsSystem Spec
.

04 Jul 2009   #4
smarteyeball

 
 

Sorry for the delay in replying mate.

I'm not familiar with the Intel control panel, so I couldn't really tell you why it's only giving you the center option.

However, since it's occurring outside windows and therefore not controlled by a driver, it does sound like a setting on the display device itself. In the OSD menu, it could be hiding under a different name like AR, Wide Mode etc
My System SpecsSystem Spec
05 Jul 2009   #5
BCXtreme

Windows 7 Home Premium x64
 
 

Well, I've pored over the physical buttons on the display, the OSD menu, and the remote, and I can't find anything that looks even remotely like an option to change aspect ratio. I guess the next step is to contact Sony support and ask them where they hid this setting.
My System SpecsSystem Spec
05 Jul 2009   #6
Orbital Shark

 
 

I have the exact same issue when connecting to my 43" plasma TV via S-Video. I have to set the following in order to view in full screen.

Main Control Panel
Display scaling issue (not just in Windows)-capture.png

TV H/V Zoom Settings
Display scaling issue (not just in Windows)-capture1.png

Hope this helps :)




Jeff


My System SpecsSystem Spec
09 Jul 2009   #7
BCXtreme

Windows 7 Home Premium x64
 
 

Orbital Shark, where you have that button that says "TV Settings" I have "Power Settings". I think this computer recognizes itself as a laptop display, so that could be why.

Well, I contacted Sony Support and they were no help at all. They just couldn't figure out what it was that I wanted to do. I finally gave up on that, and so I'm going to stay open to more suggestions from you guys, if anyone has any. I'm also going to try taking pictures of what this display is doing, compared to what I want it to do, just so I can confirm with you that I'm using the right terminology to describe all of this.
My System SpecsSystem Spec
09 Jul 2009   #8
Orbital Shark

 
 

My System SpecsSystem Spec
09 Jul 2009   #9
BCXtreme

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by Orbital Shark View Post
Actually, that has been there for a while. That is what I installed on this computer during my attempts to solve the problem. Unfortunately, no go.
My System SpecsSystem Spec
09 Jul 2009   #10
Orbital Shark

 
 

If you right-click the desktop do you get 'Graphics Properties' showing in the list?
My System SpecsSystem Spec
Reply

Thread Tools


Similar help and support threads
Thread Forum
Gadget Scaling issue
I have a Acer H257HU 1440P Monitor and at 2560X1400 the gadgets don't look right, they look weird. The cpu ram gadget specifically. Whenever I set text at 125% the gadgets look weird and no it's not a IE 11 issue, it's a scaling issue with windows 7. So I don't know how to fix this weird issue.
Customization
HDMI scaling issue (no Catalyst options)
Hi I have an ASUS CM1730,CM1830 AMD Phenom IIx6 w/t inboard ATI Radeon 3000 graphics Running Win 7 Home P Here is my issue I decided to use an HDMI connection for my monitor, worked great, Looked great. I run 1928x1080 on ASUS monitor, I noticed a scaling issue, the screen was undersized with...
Graphic Cards
Welcome screen scaling issue
So Just installed Win7 x64 in a GPT partition alongside my OEM Win8.1.1 on my new laptop, got all the drivers installed, everything is running relatively smooth as it can be for running a 6 yr old OS on a brand new PC (yes folks, Win7 is *that* old) . I have my scaling set to 200% as my display...
General Discussion
How do I disable display scaling in "Microsoft Office 2010"?
How do I disable display scaling in "Microsoft Office 2010"? Checking disable in properties doesn't work like it does for non Microsoft programs. Does anyone know an advanced way to trick it into disabling DPI scaling?
Microsoft Office
Intel Graphics Control Panel Scaling Issue
My fullscreen looks windowed and has the same resolution. Eg: I have 1366x768 monitor and the game is originally 640x480 window but can be played on fullscreen. It worked till now, but suddenly instead of stretching and scaling full screen, it became centered and maintained the same resolution....
Gaming


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:09.
Twitter Facebook Google+