What I like about it is that it's a nice bright white without the blue in it. I just don't like the yellowish light given by some soft white bulbs.
I hope they come out with a 100W version of this LED at a good price soon. I'd like to see how bright that will be for the main kitchen lights.
That's the same one I use in my ceiling fans and they dim perfectly. They have a 5 year warranty but you need to return the receipt, the bulb and the Proof of Purchase. I always scan my receipt as the original will fade over time and save the original packaging as it has all the information. Just hope I can find all that stuff in 5 years.
Jim
Here is the Kevin scale and what to look for in lights. The one Shaun bought is 5000K and the other common one is 2700K.
Jim
The design is basically coming from a flood light design which might be useful outdoors as well see packaging,
At 16 buck a pop that's tells the story,
If they're dimmable it would be a marvel they weren't able to do that at one time and only made a strobe light effect or better known as flickering,
At first if you wanted one to dim it needed a very expensive switch so if it doesn't now it's come a long way,
Three way dimming is more common via most traditional reading lamps have that feature,
Possibly they would operate there as well ?
Cheers.
Okay everybody, try to get a grip, as to some laws including this one there are exceptions. I haven't searched World-wide, so there may be exceptions there to.
The caveat is yearly sales:Q: Does this affect all lightbulbs? What about specialty bulbs?
A: No, the new standards do not affect all bulbs. Various specialty bulbs are exempt, including appliance bulbs, heavy-duty bulbs, colored lights, three-way bulbs, and others.
The new energy efficiency standards will affect conventional, pear-shaped medium size screw-in, lightbulbs, and some reflector bulbs like the ones we use in traditional lighting fixtures in our homes.
Exemptions: There are 22 types of traditional incandescent lamps that are exempt. DOE will monitor sales of these exempted lamp types after the legislation is implemented. If it is determined that of any one of these exempted lamp types doubles in sales, EISA requires DOE to establish an energy conservation standard for the particular lamp type. This provision will prohibit any one of these exempted lamp types from taking market share from the general service lamps that are affected by the EISA efficiency standards.
- Appliance lamp
- Black light lamp
- Bug lamp
- Colored lamp
- Infrared lamp
- Left-hand thread lamp
- Marine lamp
- Marine's signal service lamp
- Mine service lamp
- Plant light lamp
- Reflector lamp
- Rough service lamp
- Shatter-resistant lamp (including shatter-proof & shatter-protected)
- Sign service lamp
- Silver bowl lamp
- Showcase lamp
- 3-way incandescent lamp
- Traffic signal lamp
- Vibration service lamp
- G shape lamp (as defined in ANSI C78.20-2003 and C79.1-2002) with a diameter of 5" or more
- T shape lamp (as defined in ANSI C78.20-2003 and C79.1-2002) and that uses no more than 40W or has a length of more than 10"
- B, BA, CA, F, G16-1/2, G-25, G-30, S, or M-14 lamp (as defined in ANSI C78.20-2003 and C79.1-2002) of 40W or less
Source: Frequently Asked Questions: Lighting Choices to Save You Money | Department of EnergyMy take on this is, since the Department of Energy is tasked to monitor sales of these specialty bulbs, and if, they go over a set threshold then EISA will apply to them, and they will also become obsolete. I haven't found anything on; if they drop below the threshold they can start being re-manufactured again.The information on this page pertains to the Department of Energy’s (DOE) analysis of and unit sales forecast for five lamp types, which was mandated by the Energy Independence and Security Act of 2007 (EISA 2007).
Among the requirements of subtitle B of title III of EISA 2007 were provisions directing DOE to evaluate and publish within 1 year a benchmark unit sales estimate for five types of incandescent lamps (rough service lamps, vibration service lamps, 3-way incandescent lamps, 2,601–3,300 lumen general service incandescent lamps, and shatter-resistant lamps). These lamp types were not made subject to the regulatory standards for general service incandescent lamps established by EISA 2007. Among the requirements of subtitle B of title III of EISA 2007 were provisions directing DOE to collect, analyze, and monitor unit sales of these five lamp types.
Source: Appliances and Commercial Equipment Standards | 1.eere.energy.gov
I believe when technology catches up with the appliances and devices that use these specialty bulbs we will start to see these appliances and devices being manufactured, and then sold on the open market with CFL's and LED's or even one that hasn't even been thought about yet.
Can you imagine the cost to retro-fit these appliances and devices?!?
If you would like to see the full Energy Independence and Security Act of 2007 (EISA) there are 16 Titles and 310 pages: Energy Independence and Security Act of 2007 (EISA) .pdf
Quote
