Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Volts question

18 Jan 2019   #1
F22 Simpilot

Windows 7 Ultimate x64
 
 
Volts question

I have a true RMS multimeter. When I measure the voltage of a 12 volt AC adapter it comes out to be around 14 volts. Why is that?
My System SpecsSystem Spec
18 Jan 2019   #2
Barman58

Windows 10 Pro x64 x3, Ubuntu
 
 

Most general purpose Power supplies AC Mains to DC (or rarely AC/AC), are designed to provide their rated output "On Load". [Connected to the device they are powering]

This makes them much easier and cheaper to produce than the type that would produce an accurately controlled output when open circuit Off load which is what you are testing using a multimeter. The output "floats" until it is connected to the load when it has some feedback and can accurately match the requirements of the application.

on a 12V DC I would expect to see around the 14V that you are seeing, but for accuracy you would really need to test under load Either a voltmeter reading across the input or maybe a current draw reading and a quick calc for a truly accurate reading
My System SpecsSystem Spec
18 Jan 2019   #3
F22 Simpilot

Windows 7 Ultimate x64
 
 

The adapter I have here is AC. As I mentioned it outputs 12 volts AC. I had to buy a 12 V AC adapter in lieu of a 12 volt DC adapter for my Ring doorbell. Don't know if Ring is a market in the UK, but it's essentially a doorbell with a camera.

I think I may test the voltage with it's draw and see what number I get this time.

I have an UNI T DMM which is also a clamp meter, and I made my own AC line splinter so I can test current. https://www.amazon.com/Uni-T-B4Q094-...web_6579490011

Really is a great DMM despite it not being a Fluke version.
My System SpecsSystem Spec
.

Reply

Thread Tools


Similar help and support threads
Thread Forum
Is 3 Volts enough to power a cpu fan
Is 3 volts enough to power a Cpu fan on a Solar panel?
Chillout Room
BSOD on new build - Increasing memory volts stabilised for 12 hours
Hi all, Well i've come here in desperation because i've tried every common sense solution off my own back and come up with nothing. I built my pc exactly a week ago, and after the first couple of days i started getting infrequent bsod screens. I tried googling codes, installing different...
BSOD Help and Support
970A-G46 MB Ram .Volts Question
Will this motherboard accept 1.6v memory by corsair vengance? im looking at the 1.6v memory modules and the g skill sniper series which run at 1.5v
Gaming
OC older Pentium D, how many volts?
I have an older HP desktop that has an Pentium D 925 @ 3GHz. According to this: Intel BSEL & VID mod Guide I should be able to use the BSEL mod and VID mod on this socket 775 CPU. Now my only concerns are how much voltage would I need to use 1.4 or 1.45? The Pentium D has a bus speed of 200 MHz,...
PC Custom Builds and Overclocking
SpeedFan Volts
I have touched on this a bit previously, but I have been trying to sort this out since, without any success. I'm totally confused by voltages displayed in SpeedFan, as shown in the screenshot. The only ones that I think that I understand are the 12v, 3Vsb and 3Vcc. I looking for a value for the 5v...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:16.
Twitter Facebook