Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: What is the Wake from hibernation sequence after sleep mode activated?

09 Mar 2017   #21
johnhoh

Win7 pro x64
 
 

try this mouse driver

Razer Diamondback 3G Driver v1.01

if you see no change to the problem, try using the standard microsoft mouse driver just to see if it makes a difference. If not, the problem is probably not the mouse.

Try a different mouse and keyboard, if you have any others at hand

Have you tried physically disconnecting everything possible and just booting with keyboard, mouse, and one hard drive?

Also try a different display driver version, or even just the microsoft vga driver. The goal here is to get just ONE successful wake from sleep.

Also try a "clean boot"

https://support.microsoft.com/en-us/...oot-in-windows


My System SpecsSystem Spec
.
09 Mar 2017   #22
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

Quote   Quote: Originally Posted by RolandJS View Post
I thought a desktop will never hibernate.
If anyone ever gets a desktop to hibernate, please PM me with the solution, I want to save it onto my hard-drive.
Desktops can hibernate if hibernate is enabled.
Hibernate - Enable or Disable
My System SpecsSystem Spec
10 Mar 2017   #23
RolandJS

Windows 7 Professional 64-bit
 
 

DavidE, I tried a few REGs, BATs -- none worked. It might be my desktop.
My System SpecsSystem Spec
.

10 Mar 2017   #24
iko22

Windows 7 x64, Vista x64, 8.1 smartphone
 
 
AVERT YOUR GAZE [unless confused about S3 or hibernate.]

DavidE, RowlandJS you are correct - THE THREAD STARTER WAS CONCERNING MY DESKTOP. Unlike many of you I have no laptop.

I don't have Hibernate now, it used to be on the Default Start Menu list after installing OS on this Desktop PC. "Hibernate" also is the name of the HIBERNATE.SYS file found on any Laptop or Desktop if sleep mode enabled.

The motherboard can support either S1 or S3. Currently mine is selected for S3 sleep mode. Well, it turns out that S3 is not hibernate sleep. THIS IS WHERE I GOT MY QUESTION WRONG!!: I say "what is the wake from hibernate sequence after sleep mode activated" THIS is so wrong as I am not using hibernate at all. Im using S3 sleep mode.

Question should therefore be WHAT IS THE RESUME FROM S3 SLEEP SEQUENCE? Much more straight forward.

Well Hibernate mode is the best sleep mode if you have a laptop - Why? Because laptops rely on batteries for their power. So <he, he> I have accidentally drawn the attention of all those Laptop users trying to sort their hibernate customization, completely by accident. So sorry, hibernate IS NOT really my question here. Sorry for getting you here.

My motherboard is currently configured for S3 sleep. So that is the mode what the question should be concerned about.

Now, if I look at DavidE's post (post #15) and do the same (ie run powerCFG -energy) then I get the same as David. S1 and S2 sleep support are false, while S3 and S4 sleep support are true. So it looks like powerCFG is only reading what the BIOS is allowing it to read. If I bother to set BIOS to S1 sleep, then powerCFG would give a different report analysis of the available states?

Now although powerCFG tells me that my mobo supports both S3 (sleep) and S4 (hibernate), the hibernate is disabled in the OS because I've done that in gpedit - and forgotten about it. That clears up my post (#11) So, my question is therefore only really about S3 resume from sleep - why is this mode failing?
My System SpecsSystem Spec
10 Mar 2017   #25
iko22

Windows 7 x64, Vista x64, 8.1 smartphone
 
 

Quote   Quote: Originally Posted by johnhoh View Post
try this mouse driver

Razer Diamondback 3G Driver v1.01
Very interesting johnhoh; I selected update driver from the Razer Customizer, and it gave me no new drivers. So perhaps you found driver that updater failed to locate? Or maybe update file not intended for my mouse?

I shall try your suggestions, one by one; treading carefully and slowly to prevent me making new mistake and forgetting where I am. I shall post again when I obtain useful results.
My System SpecsSystem Spec
10 Mar 2017   #26
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

Quote   Quote: Originally Posted by RolandJS View Post
DavidE, I tried a few REGs, BATs -- none worked. It might be my desktop.
If you want help with your problem, I think you should create your own new thread.
To me it sounds like you have a different issue than this thread is about for iko22.
My System SpecsSystem Spec
16 Mar 2017   #27
iko22

Windows 7 x64, Vista x64, 8.1 smartphone
 
 

Quote   Quote: Originally Posted by johnhoh View Post
try this mouse driver

Razer Diamondback 3G Driver v1.01

if you see no change to the problem, try using the standard microsoft mouse driver just to see if it makes a difference. If not, the problem is probably not the mouse.

https://support.microsoft.com/en-us/...oot-in-windows
Downloaded installer (Razer Diamondback 3G 1.01).
Installer pauses and requests confirm to install: "The install driver is the same as the current driver. Do you want to remove it?". So far I have only clicked no.


If I should try the standard microsoft mouse driver, how would I go about enabling the earlier driver? Delete the Razzer driver from the Driver Store File Repository, or is there easier way?

Quote   Quote: Originally Posted by iko22 View Post
I get the same as David. S1 and S2 sleep support are false, while S3 and S4 sleep support are true. So it looks like powerCFG is only reading what the BIOS is allowing it to read. If I bother to set BIOS to S1 sleep, then powerCFG would give a different report analysis of the available states?
Wnet back into BIOS selected (S1) suspend mode. Ran powerCFG again. powerCFG now reports supported sleep states are S1 >>> true; S2 >>> false; S3 >>> false; S4 >>> true. Ie changed from (Post #24). Otherwise energy report same errors and warnings.

Ran powercfg -devicequery wake_from_S1_supported and found one line difference from powercfg -devicequery wake_from_S3_supported (Post #19). The line difference appears to be PCI bus is supported in (S3), and not (S1). Both reports say Razer Diamonback 3G and HID compliant mouse support resume from sleep.

Confirmed power plan now supports (S1), confirmed Suspended the computer into the low power mode state (S1), confirmed computer resumes from (S1) sleep state.

>>> Computer fails to resume from (S3) low power mode, Computer successfully resumes from (S1) low power mode (USB mouse, USB keyboard, DVI monitor, one disk drive, one Coax Ethernet).


Quote   Quote: Originally Posted by johnhoh View Post
Re-Configured BIOS to accept (S3) suspend mode.
Followed instructions "how to perform a clean boot in windows". And I'm afraid the configured clean boot computer failed to resume from the (S3) sleep state. What ever the issue is with resuming from sleep mode, the cause is unlikely third party startup services?
My System SpecsSystem Spec
16 Mar 2017   #28
johnhoh

Win7 pro x64
 
 

Right click within device manager to install/uninstall drivers, unless you have the installation file like you do for the razorback. No need to delete any drivers when you try a new driver. The microsoft driver can always be found through device manager so as long as you have your razorback driver installation file you should be able to switch back and forth between them.

I agree that since a clean boot produced the same symptoms the issue is not likely due to a program. Note that a driver problem does not always mean a bad driver. Since a driver is the layer between the hardware and the rest of the system, failing hardware often produces exactly the same symptoms as a bad driver. So if you do nail this down at some point to a certain device, it maybe that device's fault or it may be its driver's fault. Just saying.

Try loading just the basic vga driver and seeing what that does, then go back to your normal graphics driver.

Also try the microsoft mouse driver then go back to razorback.

If the problem is your hard drive, there's not much to do here unless you have a second boot drive to try.

Try sleeping/waking with the ethernet unplugged.
My System SpecsSystem Spec
17 Mar 2017   #29
iko22

Windows 7 x64, Vista x64, 8.1 smartphone
 
 

Thank you - I located relevant menu option on Device Manager for both Display adapter and Human Interface Device.

The Display went into VGA okay.

Only the Operating System hadn't responded very well to the mouse Diamondback being disabled, as the OS evidently had failed to find the Microsoft mouse driver. Subsequently, the pointing device lost any coordination while in Windows environment - I am wondering whether I chose the right menu option, as I chose 'disable' rather than 'uninstall'?

Without a usable mouse I resorted to pressing CTRL + ALT +DEL from keyboard, to restart the computer, and use CD-ROM to use System Repair recovery environment, then system restore got my mouse driver back enabled.

Retest of the Sleep state Resume failed, as I was unable to choose the right mouse driver for the test.

While it is straightforward updating a driver to the latest file, attempting to downgrade a driver to a more basic generic driver appears to have undesired complications. I think I must be missing something that would allow me to switch back and forth between mouse drivers easily.
My System SpecsSystem Spec
17 Mar 2017   #30
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

Quote   Quote: Originally Posted by iko22 View Post
Confirmed power plan now supports (S1), confirmed Suspended the computer into the low power mode state (S1), confirmed computer resumes from (S1) sleep state.

>>> Computer fails to resume from (S3) low power mode, Computer successfully resumes from (S1) low power mode (USB mouse, USB keyboard, DVI monitor, one disk drive, one Coax Ethernet).
in post #27 are you saying S1 sleep works and S3 sleep doesn't work ?

check if you have the latest bios version, here's some links for the Gigabyte EP45-UD3LR
GA-EP45-UD3LR (rev. 1.0) | Motherboard | GIGABYTE
GA-EP45-UD3LR (rev. 1.0) | Motherboard | GIGABYTE
GIGABYTE GA-EP45-UD3P LGA 775 Intel P45 ATX Intel Motherboard-Newegg.com
My System SpecsSystem Spec
Reply

 What is the Wake from hibernation sequence after sleep mode activated?




Thread Tools




Similar help and support threads
Thread Forum
Laptop extremely slow to wake up from sleep mode, 5+ minutes to wake
Hi, I am new here. Hoping someone can help me out with this issue. I work in IT so am not a complete computer bonehead and am at my wits end with this. My laptop is about 4 years old, it's a toshiba. For whatever reason, it started taking 5+ minutes to wake up from sleeping. If it sleeps...
Performance & Maintenance
BSOD when wake up from hibernation/sleep
Pleas help, BSOD happens when opening the lid of laptop.
BSOD Help and Support
Laptop won't wake from Sleep/Hibernation, PLZ HELP!
Recently my Dell Inspiron N5110 intel 2.4GHZ, 4Gb Ram, Windows 7 64bit Laptop Refuses to wake from sleep or hibernate. Bios driver?? Worked fine 2 days ago and I dont have an applicable restore point... Also Video and Audio playback get choppy in any player after using not even 2 out of 4gb of RAM....
General Discussion
Scheduler fails while trying to wake Windows from sleep/hibernation.
Hi there, I am running a Windows 7 64-bit setup, and I'm trying to get a timer to wake Windows from sleep or hibernation. I've got it to work flawlessly on my desktop, however on my laptop, a Dell D630, I can't seem to get it to work. I've created a task triggering on a specific time and...
General Discussion
Wake the PC from sleep/hibernation when power comes up
I live in a place where we have power shortages from time to time. I have my Dell desktop pc attached to a UPS and i have configured the pc to go to sleep after 5 minutes when on UPS. Is there anyway to wake up the pc automatically once the power is on? I have connected my UPS with USB cable to the...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:02.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App