Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: SCSI driver for Win7 pro 64 bits

03 Nov 2013   #11

Windows 7 x64

Quote   Quote: Originally Posted by ETHE View Post
Try this driver. It works fine for me.
I don't understand how to install this driver, or any of the drivers on the Adaptec site.

I go to Device Manager, & select my SCSI controller.
I select General -> Update Driver.
I select Browse My Computer.
I select the directory with the unzipped files.
I click Next.
Says, "Windows could not find driver software for your device."

All of these downloads--every last download from Adaptec--contains no drivers. A driver would be a DLL or an EXE. These contain only .cat, .inf, .sys, or .pnf files. No drivers.

My System SpecsSystem Spec
15 Dec 2013   #12

Windows 7 Ultimate x64

Thanks ETHE
it seems to work very fine.
My System SpecsSystem Spec
19 Dec 2013   #13

Windows 7 Home Premium 64 bits

Thanks a lot for this post ETHE
I will now be able to store sounds in an old akai sampler with a modern PC :)
My System SpecsSystem Spec

03 Feb 2014   #14

Windows 7

Thanks ETHE, I've installed the driver successfully.

I've dusted down my old Canoscan FS2710, but cannot get the Canonscan software (from the CDROM to talk to the scanner). If I reboot, there is communication from the PC (Win7 x64) to the scanner as it starts to make whirring noises... so how did you get the scanner to communicate? what software did you use?

My System SpecsSystem Spec
25 Feb 2014   #15

windows 7 x6

worked for me..I'm so grateful!!!
My System SpecsSystem Spec
01 Mar 2014   #16

Windows 7 Ulitimate x64

Thanks ETHE, I've looked everywhere for this. I'll now be able to use my Emu Esi 4000 sampler with a pc to load samples and create sample discs.
My System SpecsSystem Spec
01 Mar 2014   #17

W8.1 64


Works with Windows 8.1 as well!
My System SpecsSystem Spec
03 Mar 2014   #18

Windows 7

and what OCR software are you using? I installed Vuescan and it couldn't see the scanner.
My System SpecsSystem Spec
03 Mar 2014   #19

W8.1 64

Quote   Quote: Originally Posted by northturton View Post
and what OCR software are you using? I installed Vuescan and it couldn't see the scanner.
I didn't - I have an old Nikon LS2000 (and somewhere along the way, I lost all the negatives I already had scanned (except for the low res copies)) - And trying to get NS3.1.2 running under W8.1 - Not happening. Not to mention the ASPI Layer.

So since this is a hit and run operation - I bought a box with a Cellery 2.4Ghz with 1Gb of RAM and XP SP3 clean install (for US$ 30). It'll be used for this, then dumped most likely.

Sorry for not being able to help.
My System SpecsSystem Spec
17 Mar 2014   #20

WIN7 ENT x64, Windows Server 2008 ENT x64, Windows Server 2008 R2 ENT x64, CentOS 5.5 x64
Adaptec AVA-2903B

Can anyone confirm or deny if this driver for the Adaptec 2904 will work with an Adaptec AVA-2903B - assuming I am also running Windows 7 (x64)?

I am quite desperate to know, for I absolutely need to get a tape drive up and running. Thank you in advance.
My System SpecsSystem Spec

 SCSI driver for Win7 pro 64 bits

Thread Tools

Similar help and support threads
Thread Forum
Using x64, SCSI driver only supports x86
Hi, I am trying to install drivers for an Adaptec AHA-2940 SCSI card. The adaptec website there is no 64 bit version available, but i have been reading around for solutions with no success. I need the "Adaptec AIC-7870 PCI SCSI Controller" ... but there is no 64 bit version for that....
Win7 on SCSI HD disappeared
Yesterday, my Win7 installed on a SCSI drive failed to boot up. I got an error message of misssing MBR. I could see the SCSI drive in the BIOS as well as boot into Acronis Recovery. I boot up using another HD, but couldn't see the SCSI drive from Disk Management. 1. How could I reinstate the...
Hardware & Devices
scsi driver for windows 7 64bit?
i have a m4a89td pro/usb3 motherboard. in bios my sata ports are in ahci mode. i have a hitachi HDS721010CLA332 1TB hard drive. ASUS - Motherboards- ASUS M4A89TD PRO/USB3 thats the link to my drivers.
SCSI Hard Drive Driver?
Does anyone know of a website that I would be able to find the drivers for a scsi hard drive? I have been searching for what seems like weeks now and can't seem to find anything.
Win7 w XP Mode vs SCSI
Despite exhaustive exploration & testing, I have not been able to get Win7 RTM to properly run my SCSI hard drives. Though my XP OS & hardware passed MS's WIN7 compatible test and my actual 32bit Win7 RTM install, recognizes my Adaptec 2940U2W PCI SCSI Host AND successfully installs latest...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:13.
Twitter Facebook