Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: SCSI driver for Win7 pro 64 bits

01 Sep 2018   #41

Windows 7 Home Premium 64-bit

Thanks ETHE - I've now got my old Minolta Elite scanner working on Vuescan through my 2903B SCSI card. Completely painless installation, and I can now finally dispose of my old XP desktop that I had only been keeping in order to use the scanner.

My System SpecsSystem Spec
14 Nov 2018   #42

Windows 7 pro 64 bit

Thank you for your help!
I have an EPSON GT 10000+ scanner at work connected with SCSI to a PC that had XP. I installed Windows 7 and the scanner didn't work and it didn't recongnise the SCSI. I managed to install the drivers from here and it works fine now.
My System SpecsSystem Spec
20 Dec 2018   #43

Windows 7 Ultimate x64

Funny how things work. A few weeks ago I was reading this article on a print production website concerning SCSI & how much of the hardware like platesetters & RIPs are still running on older systems because the hardware still has a SCSI interface and a new SCSI-USB interface has been developed.
My System SpecsSystem Spec

08 Mar 2019   #44

Windows 7 Ultimate x64

thank you, using win 7 x64 on march 2019
My System SpecsSystem Spec
3 Weeks Ago   #45

windows7 ultimate 64bit

I had my Agfa 1236s working fine under XP and seven 32bits with scanwise, then windows7 64bits after I forecely installed AIC7850 PCI SCSI W7 64 AVA-2904/djsvs.inf as an old-generation driver.
Vuescan worked fine in any case too.

But, sadly, I've no driver available under Windows 10 64bits, and none of the above solutions worked, even latest vuescan supposed to provide a driver for Agfa1236s under windows 10.
Tried to make it work under Virtualbox with no more luck.
My System SpecsSystem Spec

 SCSI driver for Win7 pro 64 bits

Thread Tools

Similar help and support threads
Thread Forum
Using x64, SCSI driver only supports x86
Hi, I am trying to install drivers for an Adaptec AHA-2940 SCSI card. The adaptec website there is no 64 bit version available, but i have been reading around for solutions with no success. I need the "Adaptec AIC-7870 PCI SCSI Controller" ... but there is no 64 bit version for that....
Win7 on SCSI HD disappeared
Yesterday, my Win7 installed on a SCSI drive failed to boot up. I got an error message of misssing MBR. I could see the SCSI drive in the BIOS as well as boot into Acronis Recovery. I boot up using another HD, but couldn't see the SCSI drive from Disk Management. 1. How could I reinstate the...
Hardware & Devices
scsi driver for windows 7 64bit?
i have a m4a89td pro/usb3 motherboard. in bios my sata ports are in ahci mode. i have a hitachi HDS721010CLA332 1TB hard drive. ASUS - Motherboards- ASUS M4A89TD PRO/USB3 thats the link to my drivers.
SCSI Hard Drive Driver?
Does anyone know of a website that I would be able to find the drivers for a scsi hard drive? I have been searching for what seems like weeks now and can't seem to find anything.
Win7 w XP Mode vs SCSI
Despite exhaustive exploration & testing, I have not been able to get Win7 RTM to properly run my SCSI hard drives. Though my XP OS & hardware passed MS's WIN7 compatible test and my actual 32bit Win7 RTM install, recognizes my Adaptec 2940U2W PCI SCSI Host AND successfully installs latest...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:30.
Twitter Facebook