Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: one problem with two sandisk drives

03 Feb 2011   #1

Windows 7 Ultimate x64
one problem with two sandisk drives


sorry for my bad english english is not my native language...

here's the problem: i have 2 usb flash disks (sandisk cruzer micro 4gb and sandisk cruzer blade 4gb) both of them, after asus motherboard drivers update (with driver genius 10) not working in windows 7 x64 ultimate. i didn't made windows restore point before update process. only all drivers backup. when i noticed those two usb flash drives causes problems i tried roll back all drivers with same program. nothing happened, problem remains. then i tried go to control panel>hardware>devices click on sandisk icon and uninstall that driver. but this is helpfull only once (after fresh usb install i can see it in my computer), when i trying to connect usb flash again, i cannot locate it in my computer. of course those two cursed usb disks perfectly working in my laptop with windows xp. and i tried to kill partition with killdisk, format again. my other usb flash drives apacer 2gb and adata 8gb working well in windows 7.

so how i can fix this crazy situation?
sorry for long post

Attached Thumbnails
one problem with two sandisk drives-cruzer.jpg  
My System SpecsSystem Spec
03 Feb 2011   #2
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64

Hello Lauris Welcome to the Seven Forums!

For flash drives including the San Disk brand you don't need any device drivers. You simply plug them into a usb port and should see a prompt by one of your security programs automatically to run a scan if the drive is good.

If you ended buying a pair of bad drives or have a problem with the usb port being used the drives won't show up. Since they work on a laptop I would be looking at the usb port as the problem.
My System SpecsSystem Spec

 one problem with two sandisk drives

Thread Tools

Similar help and support threads
Thread Forum
Snapped Sandisk Usb
Hi, I have a snapped sandisk edge usb pen. Does anyone have a wiring diagram so i can get the information off it? It has snapped straight across after the section what plugs into the usb socket.
Hardware & Devices
Sandisk SSD?
I plan placing an order for SanDisk Extreme PRO SSD 240 GB, after doing some research for both by desktop and laptop. Your expert thoughts about them? Would they be compatible with the desktop and laptop.......since they are SATA II and not III......both at the moment running WD Black and...
Hardware & Devices
SanDisk HyperBoost i got this thing a couple weeks ago, and whenever i close my laptop (it says in Power Options closing the lid goes to sleep), it gets disconnected and says caching disabled. this happens every 2-3 times i...
Hardware & Devices
Problem with Sandisk USB
I have a Sandisk Cruzer Titanium 4GB U3 usb-key, but after I insert it on my Win 7 machine, I see the following message: However, I can still access all my files on it (at most of the times that I insert it, sometimes I can't). On...
Hardware & Devices
SanDisk Cruzer Flash Drive-AUTOPLAY problem
Hi, I have this flash drive USB Flash Memory - Smart Design Flash USB Drive by SanDisk U3 is built within it. As i put it in win7 i dont have the AUTOPLAY menu , but I can through the browser locate the two components of the drive under My Computer: 1-CD DRIVE SYSTEM U3 2-REMOVABLE DISK
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:05.
Twitter Facebook Google+