New
#51
Solved my windows 7 x32 PCI Simple Communications Error
My board is an Intel DG965RY which does not have Windows 7 driver support (other than the chipset inf.) The error is due to a lack of the Intel Management Interface driver. I downloaded (from the Intel support site) the Vista x32 Management Engine Interface driver as I am running 32 bit Windows 7. To sucessfully run this file: click on properties of the downloaded file. On the compatability tab, check the box "Run this program in compatability mode for" and select the drop down for Vista. Near the bottom of the page select Privledge level and check the box for Run as Administrator. If you don't do this the driver will say this operating systems is not supported and won't run. After running this driver I rebooted and went to the bios settings. Under advanced I selected fan detection "on the next boot". I don't know if this step was necessary, but after doing all of the above my device error message is gone. I get lots of help from various forums and this is a give back: Thanks