Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Aiptek HyperPen 6000

02 Apr 2011   #11
pokora

Windows 7 Ultimate x64
 
 

The tablet works fine on XP... now I'm looking for a correct CABLE driver. Since the ones I tried don't even recognize there's a tablet connected to them. First things first. If the cable works out, I might be able to work out the tablet as well... The cable seems to be HL-340 (device id: USB\VID_1A86&PID_7523&REV_0254) but the HL-340 drivers craze up on Windows 7 (They work fine on XP) ... so I'm looking for sthing to make the cable recognize the tablet and not start switching on-off like CH340SER (the name of the driver ; ))

Any help appreciated... rly xD


My System SpecsSystem Spec
.
02 Apr 2011   #12
pooch

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by pokora View Post
The tablet works fine on XP... now I'm looking for a correct CABLE driver. Since the ones I tried don't even recognize there's a tablet connected to them. First things first. If the cable works out, I might be able to work out the tablet as well... The cable seems to be HL-340 (device id: USB\VID_1A86&PID_7523&REV_0254) but the HL-340 drivers craze up on Windows 7 (They work fine on XP) ... so I'm looking for sthing to make the cable recognize the tablet and not start switching on-off like CH340SER (the name of the driver ; ))

Any help appreciated... rly xD
Did you not get a driver CD with the cable?
I have had a look in the internet but cannot find any drivers for this cable for Windows 7 x64.
The drivers from here as suggested by pebbly www.aiptek.eu - Download Section should work with 7 x64 as I had one of the Aiptek tablets running on 7 x64 even if it was for a very short while.
My System SpecsSystem Spec
03 Apr 2011   #13
pokora

Windows 7 Ultimate x64
 
 

Did you have a serial or usb tablet? I still can't get it to work. The cable did come with a driver... Windows XP one >.> Any x64 driver should work from my experience... Either way, I'd like to hear how did you get yours to work ; )
My System SpecsSystem Spec
.

03 Apr 2011   #14
pooch

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by pokora View Post
Did you have a serial or usb tablet? I still can't get it to work. The cable did come with a driver... Windows XP one >.> Any x64 driver should work from my experience... Either way, I'd like to hear how did you get yours to work ; )
My device was USB and I had no problem getting it to work, your problem is just the driver for the cable and unfortunately I have no answer as I have found no evidence of a x64 driver

Have you thought about switching to x32bit windows 7
My System SpecsSystem Spec
03 Apr 2011   #15
pokora

Windows 7 Ultimate x64
 
 

I'd faster install my old xp on a separate partition ... What good would do me 32 bit sys with 64 bit processing power... ; )
Well... thanks for trying anyway..
My System SpecsSystem Spec
03 Apr 2011   #16
pooch

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by pokora View Post
I'd faster install my old xp on a separate partition ... What good would do me 32 bit sys with 64 bit processing power... ; )
Well... thanks for trying anyway..
lol ok but I doubt with yout system that you would notice much difference in operation https://www.sevenforums.com/general-d...omparison.html
Also providing you have a windows DVD the change is relatively easy as you can still use the same activation key and make your own 32 bit copy from the 64 bit DVD Windows 7 Universal Installation Disc - Create[2]=General%20Tips

Whatever you do I wish you well
My System SpecsSystem Spec
03 Apr 2011   #17
pokora

Windows 7 Ultimate x64
 
 

Hmm... You know... I feel really stupid now ^ ^
Thanks for the comparison link... With my hardware it would seem it'd be even better to run 32bit ... ? With only 2gb ram, the processing power isn't getting much bigger on x64 from what I understood.

Is there anyway to change to 32bit without formating my system drive?

Thanks for the great help ^ ^
My System SpecsSystem Spec
04 Apr 2011   #18
pooch

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by pokora View Post
Hmm... You know... I feel really stupid now ^ ^
Thanks for the comparison link... With my hardware it would seem it'd be even better to run 32bit ... ? With only 2gb ram, the processing power isn't getting much bigger on x64 from what I understood.

Is there anyway to change to 32bit without formating my system drive?

Thanks for the great help ^ ^
No that would be the one snag, you have to do a new install
My System SpecsSystem Spec
04 Apr 2011   #19
pokora

Windows 7 Ultimate x64
 
 

Heh... reinstalled system. Got 32bit ver, installed all the drivers and... finally got the tablet to work.
Too bad tho, I can't get HyperPen manager to work at all so, well, no pressure for me or anything at all. Ill be trying VirtualBox now... maybe that'll bring some luck ^ ^
My System SpecsSystem Spec
04 Apr 2011   #20
pokora

Windows 7 Ultimate x64
 
 

The one on Virtual Box seems to work, but only on Serial Port this time, not USB... funny thing, now my Windows 7 does recognize there is a serial tablet connected... but it doesn't give any response at all. It's not moving with tablet drivers... but it's acting the same with serial mouse drivers... this is all to weird. Thanks for all the great help and tutoring and all... ^ ^
My System SpecsSystem Spec
Reply

 Aiptek HyperPen 6000




Thread Tools




Similar help and support threads
Thread Forum
Inspiron 6000 and Windows 7 -- Drivers
Good morning, SevenForum friends, I have installed Windows 7 on my Inspiron 6000 and all I need are drivers that will work. I once had an installation of Windows 7 RC, but I didn't think ahead and take down the names of the drivers that worked (and I was able to connect via wi-fi, have nice...
Drivers
Aiptek camcorder missing a Win7 driver
Hey all, I've recently purchased a small handheld camcorder from Aiptek - namely the Aiptek High Speed HD 720p Camcorder, model number V2T6. It's a nifty little device with 2GB internal memory and the option of recording 720p video at 60 fps. Problem is, I just found out that Aiptek never issued...
Drivers
Dv 6000 Help
ok, load of problems 1st. video - i cant play wow. it says failed to find suitable display driver. 2nd. audio - Says no audio output device is installed 3rd. - i have 1 unknown drive, 1 coprocessor, and 3 base system drivers i cant find the hardware id's are 1st base system...
Drivers
hp dv 6000 Remote Control Does Not work
I just purchased hp dv6000, so i am confused now its remote control not working.... any suggestion? my OS is windows 7 ultimate n 32 bit
Hardware & Devices
ATI HD 6000 Series GPU's
It seems ATI have more cards on the way in the near future. Graphics Cards Supplier Expects ATI’s “Southern Islands” to Show Up in Q4 - X-bit labs
Graphic Cards
6000+ x2 vs 9600 x4
I had a debate with someone the other day about 2 specific processors and which of them would perform better. The processors in question were the AMD 125W 6000+ 3.0Ghz Windsor and the AMD 95W Phenom 9600 2.3Ghz Agena. These 2 particular processors are very comparable considering the...
Chillout Room


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 03:35.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App