New
#1
driver for hp laserjet 1010
please guys can you help me with the driver for hp laserjet 1010 for window seven 64 bit cause i install the vista 64bit but it doesn`t work at all...
please thanks
please guys can you help me with the driver for hp laserjet 1010 for window seven 64 bit cause i install the vista 64bit but it doesn`t work at all...
please thanks
Hello Sanchi,
Welcome to Seven Forums.
Have you tried installing in Compatability mode: Info here if needed. Compatibility Mode
Hope this helps.
Gary
I see some drivers for Windows 7 at windows update catalog here.
Microsoft Update Catalog
Search your printer name and use the latest by date
hi gary thanks for your reply so you mean that i need to take the driver for vista 64bit and to run it with compatibilty mode?
Getting the Laserjet 1010 to work on Win 7 RC+1 (ver. 7201). I am running 32 bit version so I am not sure if this will work for the 64 bit version.
Note: Win 7 shares the same code base as Vista. Since there are not always Win 7 drivers available for devices, I have often found that Vista drivers will work.
I don't know when HP released Vista drivers for the 1010 (had to fight with this dang printer to get those working in the past), but they seem to have them now.
Here are the steps I took to get the 1010 working on Win 7.
Download HP drivers from here:
HP LaserJet 1010 Printer series*-* HP LaserJet 1010/1012/1015 Host Based Driver - HP Business Support Center
Unzip into a folder/destination of your choice (remember where you put it)
Go to Devices and Printers window (from win 7 start button)
Click Add Printer
Tell it Dot 4 printer as the Port type
Click Have Disk
When it can't find the driver on A drive, click Browse
Point it back to the Unzipped file location you saved earlier
It should find the .inf file at this point.
Follow the remaining steps.
This should work fairly easily...at least it did for me.
Regards,
Jay
AMD@Home Blog: http://links.amd.com/Home
Twiter: Java_Jack
Hey,
I've tried doing exactly the series you just laid out, yet i'm getting no fruit for my efforts. here's what i am coming across:
Win7.7100.x86
Installed using DOT4 port
Select Vista32 drivers fresh from HP
Installation Completes and Device shows up in CPanel with green check mark
Open notepad and print text --> icon turns to yellow hazard and doc stays in the spooler with no status.
So... Rclick printer and 'troubleshoot' only to get "Troubleshooter cannot identify the problem".
as soon as I cancel the document the icon status changes back to a green check mark.
?!@#$?
hi guys i try all the steps but in vain dosn`t work at all......
O_o
So... your recommendation is to throw out a perfectly good laser printer, and replace it with a new, costly, less efficient inkjet?
Do you work for HP?!? Sorry man, but thats some of the worst advice i've ever heard.
Last edited by Dogz; 28 Jul 2009 at 16:21.