Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: IEEE 1394 Controller

14 May 2011   #11
cdog

windows 7 64bit
 
 

nothing


My System SpecsSystem Spec
.
15 May 2011   #12
pooch

Windows 7 Ultimate x64
 
 

sorry Then I really do have nothing to go on, a number or code on a chip, may have hinted to the manfacturer. Short of guessing and trying various drivers from the different manufacturers this is really not looking good
My System SpecsSystem Spec
15 May 2011   #13
cdog

windows 7 64bit
 
 

My stupidity. I looked at it again and it is not A/V its VIA the company name

Their manual says:
1394 Firewire controllers
A driver is built into Windows 7 by default. No extra download is required.

The card was originally misplaced or I do not know what. I took it out and back. Now is good. I only needed to modify the 1394 OHCI Compliant Host Controller to Legacy and it is working perfectly.

Thank you for your help

case closed
My System SpecsSystem Spec
.

15 May 2011   #14
pooch

Windows 7 Ultimate x64
 
 

yaaaaaaaaaaaaaaaaaay that's great!! I am glad you got it working and thank you for letting us know
My System SpecsSystem Spec
Reply

 IEEE 1394 Controller




Thread Tools




Similar help and support threads
Thread Forum
Setup does not support USB or IEEE 1394 Port
I've been trying to install windows 7 to an external hard drive because one of my computers is effed. It's a 1 TB external hard drive that I've done the following to: Format NTFS, mark partition as active in disk management, created a bootable sector via command prompt and updated mbr, and tried...
Installation & Setup
FireWire (IEEE 1394) Not recognized...
I have a Sony handycam and every time i connect it to the computer with IEEE 1394 i get "USB Device Not Recognized". It's worked before when i had Windows XP, now in the device manager there is nothing that looks like IEEE 1394. The IEEE 1394 is connected directly to motherboard, and its...
Drivers
IEEE 1394 Issues
I've been having some recent issues with FireWire on my Windows 7 desktop. Now, it's worked before, but now in the device manager, I don't see anything relating to IEEE 1394. When I hook up my Sony HandCam, the "hardware connected" sound plays, then it plays the "disconnect" sound. Right before...
Drivers
VIA 7 Port IEEE-1394 Firewire & USB 2.0 PCI Combo Card
I am having trouble getting the Firewire to work on this card in 7 Ultimate. I tried using legacy drivers and none work. Does anyone have any input? Thanks.
Drivers
IEEE 1394 Firewire Nec (problem IRQ)
Hello My Firewire controller work not correct On firewire use soundcard In Windows Firewire IRQ 14 And Controller Hard drive IRQ 14 Then i lisen music and work Hard drive Sound is crash in milli seconds And sound play next In BIOS i change IRQ on 10 But Windows no changes (IRQ 14) ACPI in...
Drivers
IEEE 1394 Bus Host Controller must be disabled/enabled
I have a Ricoh, but changed it to the Legacy driver. I still have to manually disable / enable it to access my drive. I guess the Windows team figured it would make good use of a persons free time. :p Anyone know how to fix this? If the external is running when I boot, I have to go through...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 01:36.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App