Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Using x64, SCSI driver only supports x86

15 Jan 2009   #1

Windows 7
Using x64, SCSI driver only supports x86


I am trying to install drivers for an Adaptec AHA-2940 SCSI card.

The adaptec website there is no 64 bit version available, but i have been reading around for solutions with no success.

I need the "Adaptec AIC-7870 PCI SCSI Controller" ... but there is no 64 bit version for that. When i try to install the drivers (there is no installer program, i just need to use the update drivers feature of windows) it says that it is not a 64 bit version so i can't use it.

Is there any solution to my problem?

My System SpecsSystem Spec
15 Jan 2009   #2

Windows 7 beta 1

Please state your exact Adaptec scsi card info. What is the ID number on the card? Exactly, what card do you have? What is the firmware version currently showing on card. (boot into scsi utility to get some version info) Have you ever changed/upgraded the firmware on this card? When was this card manufactured? What scsi drives are you using? Ultra320 scsi? 160 scsi?

It appears you're trying to make the AIC-7870 PCI SCSI Controller act as an "emulated" drive, for 64 bit, on the 2940. Why?

You are on Win7 now? Was your card running on Vista x64 with x64 drivers? Did you upgrade to Win7 or clean install Win7?

Are you saying x64 drivers you have don't work with Win7?

Did you try this advice & NOT find x64 driver?
"in device manager, select the SCSI adapter, click "Update driver", "Browse my computer for driver software", "let me pick from a list of device drivers on my computer", uncheck "show compatible hardware", and select "Adaptec" as Manufacturer and "Adaptec AIC-7870 PCI SCSI Controller (emulated)"

With more info, I may be able to help you.
My System SpecsSystem Spec
16 Jan 2009   #3

Windows 7

It's the Adaptec AHA-2490. I haven't changed the firmware on this card. I am using a HP 6300 scanner with the card, connected through SCSI. (The usb port on it is broken and has not worked for years)

I was previously Windows XP x86, and now I'm using Windows 7 x64. I did a clean install.

There are no x64 drivers for this card full-stop.

I was trying the AIC-7870 driver because i read somewhere its compatible with the 2940, but I can't find it in the windows 7 driver bank either.

I read somewhere else that the xp 64 driver would be accepted but I can't find any, after a long time searching.

Is there a way to force the windows xp 32-bit drivers to load and hopefully work?

Edit: I also have tried selecting that driver, but it doesnt come up in my list of drivers when i follow those steps.
My System SpecsSystem Spec

05 Nov 2009   #4

Windows 7 Pro x64
Windows 7 x64 driver for Adaptec 2940 SCSI card

If you can find someone with a Vista x64 system there is an "Adaptec AIC-7870 PCI SCSI Controller (Emulated)" driver in the Driver Store on that system that will work with Windows 7. For some reason, that driver was dropped from the in-box drivers in Windows 7.

It is located in the C:\Windows\System32\DriverStore\FileRepository\djsvs.inf_6451fbc2 folder. Copy that djsvs.inf_6451fbc2 folder to your Win7 computer.

To install it, go to Device Manager, select your SCSI adapter, right click and choose Update Driver Software. In the Window that appears choose "Browse my computer for driver software". In the next window, enter the location of the djsvs.inf_6451fbc2 folder on your computer, then click Next. You will get warnings about the drive being unsigned and that it may not work. Say yes, you really do want to install the driver -- it will work.
My System SpecsSystem Spec
09 Nov 2009   #5

Window 7 64

I tried as suggested on a 2940U/UW on a clean install of Window 7 64-bit with no joy. W7 says cannot start (code 10). Any one else had success or other suggestions?
(P.S. Also tried the modification of taking out the NTx86 information on two lines of the .inf file suggested on Microsoft Technet, but that didn't work either.)
My System SpecsSystem Spec
27 Jun 2013   #6

windows 7 64 bits

i've got same problem with SCSI card AHA-2940U2W on Windows 7 64 bits

error code 10 :/
My System SpecsSystem Spec
27 Jun 2013   #7

Windows 7 Pro 64 bit

A 64 bit OS must use 64 bit drivers exclusively. There is no provision to run 32 bit drivers on a 64 bit OS.
My System SpecsSystem Spec
01 Jul 2013   #8

Windows 7 Ultimate Retail Box (64-bit installed) + Service Pack 1

Those SCSI cards have seen better days, I threw the 2 I had in the garbage they were 2940's and at least 10 years past their prime, so obsolete now, not worth $10 on ebay.
My System SpecsSystem Spec
05 Jan 2014   #9

windows 7 ultimate x64

Hi all,
since I am new here, I started to do some snooping and came across this thread.
I have a driver installed for my AHA 2940 with windows 7 64 bit.
after installation it changes the card to an Adaptec AIC-7870 PCI SCSI Controller (Emulated)
< that is the description in device manager >.
If anyone is still interested, let me know how I can upload the driver to here.

My System SpecsSystem Spec
24 Jan 2014   #10

win 7 64bit

please please upload i am trying to install AHA 2940UW/B
My System SpecsSystem Spec

 Using x64, SCSI driver only supports x86

Thread Tools

Similar help and support threads
Thread Forum
SCSI driver for Win7 pro 64 bits
Hi, my old Adaptec 2904 SCSI card is not recognized by Win7 64bits. Adaptec has drivers for Win7 32bits only, and says "there will be no support for 64 bits drivers for this card" (AIC-7850 based). Do you know "alternative" drivers (or other solution) that would allow to use the Adaptec...
Initio INI910u SCSI card windows 64 bit driver
i am looking for a 64 bit driver for my Initio INI910u SCSI card. Can someone give me a favor pointed me a link i can down this driver or identical driver for this SCSI Card. I have driver only support 32bit windows. Thanks in advance
scsi driver for windows 7 64bit?
i have a m4a89td pro/usb3 motherboard. in bios my sata ports are in ahci mode. i have a hitachi HDS721010CLA332 1TB hard drive. ASUS - Motherboards- ASUS M4A89TD PRO/USB3 thats the link to my drivers.
SCSI Hard Drive Driver?
Does anyone know of a website that I would be able to find the drivers for a scsi hard drive? I have been searching for what seems like weeks now and can't seem to find anything.
Adaptec 2930C SCSI driver needed
I have an Adeptec/ Iwill 2930C (not the 2930CU) SCSI card which worked satisfactorily with my previous PC running on XP SP3 (used to feed an Epson GT-7000 scanner). I now wish to install in my new Windows 7 (32 bit) PC, but cannot find a driver (Windows cannot locate a driver and Adaptec have...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:25.
Twitter Facebook