Need Help ASAP, Zebra/UPS Thermal 2844 And Windows 7  

Page 5 of 6 FirstFirst ... 3456 LastLast

  1. Posts : 2
    Windows 7 Professional
       #41

    Thanks everyone for your great support. I followed utalkitypes instructions to a key and everything is working correctly. I never would have figured this out without everyone here. Thanks for sharing your ideas and experiences.
      My Computer


  2. Posts : 3
    Win 7 32 bit
       #42

    UPS Printer


    kdogg said:
    I have a thermal label printer that is manufactured by Zebra. It's used for printing UPS labels etc.

    Windows sees it as UPS Thermal 2844 but says it has no drivers.

    I've tried getting all the various driver packages from Zebra's web page for this model and it simply won't work. Windows says it can't even find a driver for the dang thing.

    This is my work computer so I'm kinda SOL til I can figure something out.

    I figure someone has to have run into this by now. I tried Googling but found nothing.

    Help!
    There is a version of Zebra LP2844 which was developed for solely for UPS, which have special UPS firmawre installed. and will not work with standard Zebra drivers. Not sure whether is is why you have the problem but seeing as Windows sees it as UPS 2844 rather than Zebra 2844, I think this is what the problem is.

    I don't know of any work-around. probably get yourself a Zebra version or use someything like Toshiba TEC, which are way better than Zebra printers.

    Regards

    Rob

    Barcode Label Printing Solutions
      My Computer


  3. Posts : 2
    64bit ultimate
       #43

    Zebra ZP 450 Fix


    I believe my trouble started with a power outage. I finally took the time today to try and diagnose the issue (hasn't printed for over a month).

    I found this very helpful video and it solved my problem. I tested it at UPS's website to make sure. Hope it helps you. It basically resets your printer. Good luck!

    UPS Modal / Brightcove and General&
      My Computer


  4. Posts : 2
    64bit ultimate
       #44

    Update to my post yesterday


    I thought I had the solution, but I tried using UPS today, and my labels did not print. So, when all else fails...you have to call them. It was quite a process getting it restored, but it works now and I would recommend you just call them. They will email you the driver, then walk you through install and proper setup within their website.

    Support's phone number is: 877-289-6418

    To save a bit of time here is the zip file...but don't do anything till you have them on the phone.

    https://filexfer.ups.com/pub/drivers...64_drivers.zip

    Good luck
      My Computer


  5. Posts : 1
    Win7 x64, x32, XP
       #45

    Zebra ZP 450 UPS drivers for Windows 7 x64 drivers.


    It's 2012 and I had the exact problem. I contacted UPS and got the drivers. Here are the links to the download from their website:
    Driver:
    https://filexfer.ups.com/pub/drivers...64_drivers.zip

    Plugin: https://filexfer.ups.com/pub/drivers/UPS2442_x64.exe
      My Computer


  6. Posts : 1
    Windows 7 Home Premium 32bit
       #46

    Hello guys,
    I just registered to tell you what the root of the problem is.

    It is because Win7 recognize it as UPS thermal 2844 (The UPS version has a UPS special firmware). What you need to do is to download the ZDownloader and the latest standard firmware from zebra website (Requires registration, about 2 minutes). Then you reflash your UPS thermal 2844 with the standard firmware.

    After the flash, you win7 will recognize the printer as a Zdesigner 2844 and you win7 will install all the driver automatically in 5 seconds.

    Problem solved. Now I can used my printer for general printing. Also works for ebay and paypal.
      My Computer


  7. Posts : 2
    Windows 7 64Bits
       #47

    This is what I did after couple hours trying to install the UPS Thermal Printer 2844.

    Follow the steps in this order.
    1.- Download the Zebra driver from this link.
    Zebra Windows Printer Drivers.
    2.- Unzip the file on his default folder.
    3.- Open file manager a look for the file name DRIVERWIZARD.EXE (Computer:Windows:Seagull)
    4.- Select the file, right Click and run it as ADMINISTRATOR
    5.- On the Wizard Menu choose INSTALL THE PRINTER DRIVERS
    6.- On Printer List go all the way down a select ZEBRA UPS 2844
    7.- VERY IMPORTANT rename the printer name as UPS THERMAL 2844 Otherwise UPS Online will not find the printer.
    IT HAPPENED TO ME that's why I expended some many time back and forth
    Follow the prompts if the system ask for restart, restart the machine
    8.- Plug your Thermal Printer to your computer
    9.- Turn it on
    10.- Wait for Windows install the printer by itself
    11- If Windows ask for restart, do it again.
    12.- Log on UPS.COM and try.
    Good Luck.
    It works to me after 4 hours looking for a solution.
    Ps.. My Thermal printer was perfect on Windows XP.. I bought a new computer with Windows 7 64Bits that's why I have to install the Thermal on the new computer.
      My Computer


  8. Posts : 1
    Windows 7 64 bit
       #48

    Hey....just download and install these seagull drivers for your zebra printer. They work for windows 7 64 bit as well.

    Download Windows printer drivers, label printer drivers, thermal printer drivers
      My Computer


  9. Posts : 2
    Windows 7 64Bits
       #49

    Yes.. In fact I have windows 7 64 Bits installed on my computer
      My Computer


  10. Posts : 1
    windows 7
       #50

    Bump to the max!!!!!

    Why doesnt anyone go to the ups.com website?

    UPS: Technical Help
    Follow these and you'll be fine...
      My Computer


 
Page 5 of 6 FirstFirst ... 3456 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 06:15.
Find Us