Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Need Help ASAP, Zebra/UPS Thermal 2844 And Windows 7

21 May 2014   #51

windows 7

I've installed seagull drivers. I can't figure out how to add any graphics . Have you been able to do it? Can you please explain how if you did?

Quote   Quote: Originally Posted by AlliedArmory View Post
I had a lot of issues getting my Zebra UPS 2844 Thermal Printer to work. In the end, it was all so simple.

Currently I use UPS and to ship and print labels. Both need different drivers to work correctly.

Setting up with

Download and install these drivers from Seagull
Go back into your "Devices & Printers" and you should see "Zebra UPS 2844". Configure it to use the 4x6 labels and you are done!

My System SpecsSystem Spec
06 Apr 2016   #52


I work with these all day. The best thing to do is to do a clean install. First turn off the printer and then disconnect it from the computer (not from the printer). Go to the ups site (assuming that it is a printer for their labels) download the zebra drivers from them (not the zebra site) then run the zebra uninstaller (select the option to delete drivers and packages), then manually check for any zebra drivers left over (click on the start button>devices and printers>>select any existing printer>click on print server properties>click on the drivers tab>delete any zebra printer drivers for ups that you see, if any). Then with the printer still disconnected run the zebra installer (you dont need the font loader option that it gives) select the printer type, and then select your port type, if it uses a usb cable select usb 001. Once it finishes installing connect the printer, turn it on and through windows (not ups) print a test page (start>devices and printers>select printer>right click on printer>click on printer properties>print test page) this will tell you if the computer can communicate with the printer. Should work. Next you need java for the ups site to communicate with the printer (this is how the image for the labels get sent). Go to to make sure you have the newest version. Once java is good to go, print a sample label or the actual label from the ups site. Should work like a charm. If still not but the computer can print a test page, restore the java security prompt from your control panel.
My System SpecsSystem Spec

 Need Help ASAP, Zebra/UPS Thermal 2844 And Windows 7

Thread Tools

Similar help and support threads
Thread Forum
Zebra/UPS Thermal 2844 Printing issue
I have been using our Zebra/UPS Thermal 2844 to printer labels via Dazzle Professional, UPS Ship Manager, and several other programs. All have printed labels correctly. Recently I have tried using ShipStation and all my labels print with a 1 inch blank gap above the printed area. There are no...
Delayed printing on serial port with Zebra LP 2844
**Might be duplicate post, my apologies if it is** Hi guys, Have a Zebra UPS LP 2844 printer, my USB port on the back of it is busted. So I bought a usb-to-serial adapter, installed the adapter software from c2g. I reinstalled the zebra printer on com port 3.
Hardware & Devices
zebra lp 2844 printer not working with windows 7
My Vista computer died, and I cannot get my lp 2844 printer to work with Windows 7. I upgraded java to 7u67 and added all the exclusions to java. The shipping label I try to create leaves off half the tracking bar and tracking number. Can anyone help me with this problem? Thanks.
Hardware & Devices
Zebra barcode printer S600( USB to serial cable) installation fails
Hi,zebra barcode code printer s600 there is no usb port,iam using usb to serial converter,PL-2303 USB-to-Serial Adapter is already installed,in windows 7 64 bit pc.In the device manager we can see in ports prolific usb to serial to serial comm port 2 is installed correctly,but when i start...
Windows 7 keeps freezing, need help ASAP!!
Hi all, first off i'm using Windows 7 x86 Ultimate. 2 days ago, i've got these annoying viruses, called something like ICQ Spy Monitor and also PowerSpy 2006. I don't use ICQ at all but those viruses tell me that they are keyloggers. I've had past experiences with keyloggers and almost had my...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:19.
Twitter Facebook Google+