Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: USB device not recognized!!! PLZ HELP

14 Sep 2009   #41
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

With the SIW tool that will show the make and model is in that model. From there you can find the updates needed. I simply find it hard to believe that nothing works at all in every port with just the clean install of 7 alone.


My System SpecsSystem Spec
.
14 Sep 2009   #42
Mercurial

Windows 7 32bit RTM
 
 

did you try to uninstall the malfunctioning controller?
My System SpecsSystem Spec
15 Sep 2009   #43
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

I can throw a fast install of XP, Vista, and 7 on and have access to any usb drive right off when detected with an NTFS partition on it. You simply make a trip into the disk management to assign a drive letter.

The Windows updates alone should anything needed listed under optional there unless you had a bad install of Windows to start with.
My System SpecsSystem Spec
.

15 Sep 2009   #44
szalajko

windows 7 7600 rtm
 
 

like i said clean install, no port works i tried uninstalling the controllers, they just load back up, no device is working plz help fresh install of win 7 64bit 5 min ago same problem 7600 rtm
My System SpecsSystem Spec
15 Sep 2009   #45
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

Perhaps one thing you can list here is what devices besides hubs are you plugging in? Does that include usb pen or flash drives, cordless mouse, printer, etc>?

For individual devices specific drivers for that device alone would be the item to look at when seeing the unknown device popup. Once you install the drivers for a specific device when plugged in that should then appear listed in the device manager. For a printer that would be in the "devices/printers" section of the Conrtrol Panel there.
My System SpecsSystem Spec
18 Sep 2009   #46
szalajko

windows 7 7600 rtm
 
 
Ok people

MY USB IS ON THE FRITZ lol now i plug in a headset, it works, BUT ONLY ON ONE USB OUTLET OUT OF THE 4, i unplug it and try it qagain it dosnt work, i have nothing plugged in and it keeps saying in device manager 2 unidentified devices, like i had 2 things plugged in but i do not. plz ppl help me, i think i just need the right drivers, cause its trying to install device drivers and it says device drivers not installed succesfully
My System SpecsSystem Spec
18 Sep 2009   #47
Snufffed

 

Quote   Quote: Originally Posted by szalajko View Post
MY USB IS ON THE FRITZ lol now i plug in a headset, it works, BUT ONLY ON ONE USB OUTLET OUT OF THE 4, i unplug it and try it qagain it dosnt work, i have nothing plugged in and it keeps saying in device manager 2 unidentified devices, like i had 2 things plugged in but i do not. plz ppl help me, i think i just need the right drivers, cause its trying to install device drivers and it says device drivers not installed succesfully
Might I ask Where did you get your Copy of Windows RTM - x64.?
for some reason I think your copy is BORKED.
My System SpecsSystem Spec
25 Oct 2009   #48
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

What you are describing is more like recycling the power supply. Once you have everything off and the ac cord unplugged as well as having the breaker on the supply turned off as well you hit the power button on the case when turning the breaker switch back on in order to discharge the caps in the supply itself.

The method is used often when a supply known to be good suddenly won't provide enough power to run the system.
My System SpecsSystem Spec
Reply

 USB device not recognized!!! PLZ HELP




Thread Tools




Similar help and support threads
Thread Forum
USB Device Not Recognized. Device Error 43/45
i don't know what is this problem. and it always appears on my system tray How to fix it? These are some pictures. http://s3.postimg.org/li0lsog8j/image.png http://s4.postimg.org/bpswqarsd/image.png
Hardware & Devices
USB Device Not Recognized
Hi, While working on my laptop yesterday evening, my mouse & external hdd stopped responding. On ejecting & re-inserting them both started getting this message 'USB Device Not Recognized'. Now none of my three USB ports are working. Though on cross checking, the devices are working on other...
Hardware & Devices
USB device not recognized.
I'm pretty sure that it isn't the first subject about it, but I didn't find any threads wich looked like mine, so I'm doing a new one. Yesterday, I was browsing the Internet like everyday of the week, and my mouse stopped working, for no reason. It just does the "tadam" (sound wich is done when we...
Hardware & Devices
USB device not recognized - but there is no usb device connected
It's recognized in device manager as "Unknown device". But I've not connected anything to pc. Also all of my usb ports are working at 1.1 speed. When I try to connect any device, I get the message "that it could work faster, if i connect it to hi-speed usb port". Any suggestions?
Hardware & Devices
USB Device Not Recognized
I've had an issue that has been driving me nuts for the past few hours. I have a Dell Inspiron 537s tower on which ive done a clean install of Windows 7 x64. Everytime I plug in a USB device it gives me a "usb device not recognized error". I've tried every solution ive found (uninstall all usb...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:58.
Twitter Facebook Google+