Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Can't print from XP to shared Windows 7 Kyocera printer

20 Mar 2013   #1
Mr Davo

Windows 7 (XP, by Virtualization)
Can't print from XP to shared Windows 7 Kyocera printer

Hi Everyone,

I have setup a Kyocera FS-2020D KX printer on a Windows 7 x64 computer. On the Windows 7 computer the printer is connected by LPT port. Within Windows 7 the printer is set to Share so that it is available over the network to other Workgroup Computers.

On an XP computer I have added the printer by using the Add Printer dialogue. During initial setup of the printer XP stated that it would "automatically get a driver from the host computer", however it failed to do this, and as a result presented me with an additional dialogue which I used to browse for an appropriate driver file.

I am unable to print a test page from the XP computer, furthermore there is some strange behaviour when right clicking on the printer and selecting Printing Preferences. I have created a YouTube video explaining the issues at hand (please take a look):

Kyocera Driver Issue

I believe that there is a basic incompatibility between the host (Windows 7 x64) computers drivers and those of the guest (XP); more specifically I think that these are driven by the fact that the host is 64 bit and the guest is 32 bit.

If anybody has any advice on how to overcome this issue (whilst leaving the printer connected by LPT to Windows 7 x64) can you please let me know?

Kind Regards,


My System SpecsSystem Spec
20 Mar 2013   #2

Windows 7 Ultimate x86

I would just try to get the matching 32 bit XP driver from Kyocera and install in manually. That's how I did it decades ago when the printer ran on a W2000 server and I had to use it from WfW Desktops
My System SpecsSystem Spec
21 Mar 2013   #3
Mr Davo

Windows 7 (XP, by Virtualization)
Solution found...

Hi Everyone,

I have found a solution to this issue. It turns out that Windows 7 64 bit has the capacity to install extra drivers for 32 bit (and other) clients. Simply go into Printer Properties and on the Sharing tab click on Additional Drivers (as illustrated below) -

...then put a tick in the box next to the additional guest type that you need to setup (e.g.: x86 for 32 bit clients like XP) -

Finally once the Windows 7 computer is setup re-add the printer to the XP guest(s). If the XP computer still has a printer installed (but not operating - as in my case) please delete it, and then re-add.

Happy printing :)

Kind Regards,

My System SpecsSystem Spec

21 Mar 2013   #4

Linux CENTOS 7 / various Windows OS'es and servers

Hi there
I posted a thread on this forum about sharing printers between XP / W7 however the printer was physically attached.

You can't in any case get the driver from the HOST computer if it's X-64 while XP itself is a 32 bit system.

Here's the link to the post --try going through it -- I'm using a USB device as an example but it should work for LPT as well provided the printer works initially on the machine it's physically connected to.

See my post -- Post 3 in the thread. Never mind about the title - it works whichever way round you have the printer connected.

Networking from Printer attached to Win XP PC to Win 7

My System SpecsSystem Spec
21 Mar 2013   #5

Win7 & XP

I have a very similar situation. I am able to print from the Windows 7 printer from my XP laptop via wifi until I reboot the laptop. After rebooting, I have to delete the Laserjet on my XP and reinstall the printer to get it working.

Any ideas how to keep this permanently?

My System SpecsSystem Spec

 Can't print from XP to shared Windows 7 Kyocera printer

Thread Tools

Similar help and support threads
Thread Forum
Shared printer - Others can't print when my pc is off
Hi, in the beginning, I should say the printer is NOT connected to the pc. I have a shared printer in the network. It's connected via cable to one router. There are usually just two devices (besides the printer, plus phones etc..) in the network: my pc (W7 U 64) - connected to the same router via...
Hardware & Devices
Kyocera FS-680 printer driver
First post here. There is no Windows 7 driver for my old but very reliable Kyocera FS-680 printer. I saw a post on a German forum that said I could use a Vista driver 'and say a prayer it'll work' but I'm reluctant to try that. :o Am I stuck with buying a new printer? Is there anyone out...
Kyocera Network Printer FAIL. supposedly Win7 Driver package
downloaded yesterday for an important installation where I was very afraid to use 64-bit Windows 7 in real production environment with non-technical users. older Kyocera model, fortunately has a fairly recent wad-respin tagged for x64 Windows 7 & Vista. Ran multiple tries as Administrator, user,...
Windows XP cannot print to printer shared on windows 7
Hi all, Printer HP Laser Jet P2015 attached and shared on a windows 7 home premium machine and there is no problem if i print to it directly. Other windows Xp machines on the same LAN can connect to it but can not print to it. And there are no error displayed. Pls give me some suggestions. Thanks
Network & Sharing
Cannot print to a "Shared" Printer on Win 7 Ultimate 64
I have searched and can't seem to find the solution!! Cannot print to a "Shared" Printer on Win 7 Ultimate 64 from a Vist 32bit machine. I can see the printer, but then it says that the drive is incorrect. It says that the *.inf file is not correct. I cannot figure this out!
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:50.
Twitter Facebook