New
#11
Going back to my last post I would try the software just to see if the issue is still happens. Plus the software may very well install an updated driver.
I agree. However seeing that the Sonys and Nikons work via USB, but not the Canon's definitely speaks of some sort of driver issue. As the OP pointed out, there are no issues with the Nikons.
This is why I say give the software a try, especially if it installs a driver. If it works, decide on what you want to do from there. If it doesn't, what's lost?
As for pulling the card from the camera and just using a card reader, I just pull the info directly from the camera. Once the files are pulled, disconnect the camera.
There was a discussion over at DP Reviews on this very question and it was basically split, with one camp saying removing and installing the card constantly left the potential for bending/damaging the pins.
Meh. Though I have a card reader, I find it just as easy to pull the files from the camera. Plus my camera is USB 3.0, where my reader is 2.0.
That said, the OP may want to give a card reader a try, just to see if the Canon files are recognized and can be pulled from a card reader.
Another possibility could be firmware; but being that the OP says various models, it's unlikely, but...
I've been removing and reinstalling camera cards for years and never damaged a pin.
I'm the opposite; I find it easier to pull the card out and plug it into the internal reader than to horse with a USB cable. Even when using an external reader, it was less hassle. Each to their own.
Both of my Canons are too old to be USB 3.0 (I'm not saying yours aren't USB 3.0). Download speeds also depend on the class of the cards. My old Class 4 cards weren't any faster on my PCI-e x1 based card reader than they were on any of my internal card readers in my portable computers or the USB 2.0 external reader I used to use. When I upgraded to Class 10 cards, I saw very little speed increase with the older readers but a dramatic increase with the new internal reader.
Last edited by Lady Fitzgerald; 29 May 2013 at 11:16. Reason: ADHD
WindowsStar
Have you tried the "chnge the communication parameter from "PC" to "print/PTP" idea?
The OP's issue is not being able to transfer via USB from Canon cameras. While not a total solution, pulling the card is a solution that's better than nothing or can serve until a proper solution is found. A more extreme alternative solution would be to use Wi-Fi enabled camera cards. Those allow downloading images from the camera without a cable via Wi-Fi. Sadly, they are expensive (which is why I hesitated to mention them).
And that was suggested; however, the debate about which method is better is not applicable here.
Also, even if the card reader worked it still doesn't address the main issue... why the Canon cameras are having issues with USB, while the others are not.
Care to elaborate since you're so sure?
I don't have my camera in front of me at the moment but I don't remember any USB settings in any of the menus. Not even my Coolpix has it. Just plug and go.