Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Leadtek Winfast TV2000XP RM Drivers ?

08 May 2010   #51
TimStitt

Windows 7 Ultimate 64 bit
 
 

So you pretty much used descaler and took Iron2000's advice? Was there anything additional in the ini file that may be useful to add to this thread?


My System SpecsSystem Spec
.
09 May 2010   #52
Deanos

 
 

If you have the Winfast TV2000XP Deluxe card, then just follow the instuctions in my other thread mentioned on the previous page.

The ini file must be exactly as I mentioned there...
My System SpecsSystem Spec
09 May 2010   #53
TimStitt

Windows 7 Ultimate 64 bit
 
 

No I don't have that card (re: the first page of this thread)..... I rewrote the inf's for my card and explained how to some time last year. I'm simply here to help and also double checking if you have any new information so I can add it and attribute it to the author. The three Winfast blogs that I am involved in on this forum are by far the busiest and constantly get re-hits. Iron2000 has done the brunt of the work and managed to solve all the questions that we've come across with the same chip as yours (and been super busy). Where-as I've looked after the other chips and sound issues (more or less anyway and with plenty of exceptions)... but I'm always after more information.

So from your other post here.... Leadtek WinFast TV 2000 XP (Deluxe), Windows 7 Pro 64 B
......and in case new readers find this. Here's your suggested ini details.

----------------------------------------------------------
Check your Bt848.inf file and make sure it is set like this:

HKR,"DriverData","Card",0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"DriverData","Tuner",0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"DriverData","HasTDA9855",0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"DriverData","TVTunerDoesFM",0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"DriverData","TVAudioUsedForFM",0x00010001, 0x01, 0x00, 0x00, 0x00
---------------------------------------------------------------

Cheers

Tim
My System SpecsSystem Spec
.

13 May 2010   #54
violetblood

Windows 7 x64 Ultimate
 
 

After many attempts and many softwares installed and uninstaled i managed to get image from tv tuner.
I have a Winfast TV 2000 XP RM on Windows 7.
Now there's another issue, there's no sound.
My System SpecsSystem Spec
14 May 2010   #55
TimStitt

Windows 7 Ultimate 64 bit
 
 

Hello Violetblood,

Are you using the onboard sound card? if so it is likely that the realtek drivers are not loaded, please get them from your Mobo CD or here MSI Global. The default drivers installed by Microsoft work for almost everything else, but some users need the correct drivers from the manufacturer to get the sound working with their TV200XP.

Let me know the results. :-)

Tim
My System SpecsSystem Spec
14 May 2010   #56
violetblood

Windows 7 x64 Ultimate
 
 

I installed the latest audio driver for my motherboard and it's the same.
My System SpecsSystem Spec
14 May 2010   #57
Deanos

 
 

Quote   Quote: Originally Posted by violetblood View Post
After many attempts and many softwares installed and uninstaled i managed to get image from tv tuner.
I have a Winfast TV 2000 XP RM on Windows 7.
Now there's another issue, there's no sound.
Hi,

Not sure about your card, but I noticed in your screen shot that it doesn't show Line In...

It is possible that it is just disabled. Common thing...

-- Right click on the speaker icon next to the time
-- Select Recording Devices
-- Right click on that screen and select Show Disabled Devices
-- If it is Disabled, Right click it and select Enable

Now, start the TV again and check in sound options, it should be there now...

Let us know if you come right with it.
My System SpecsSystem Spec
14 May 2010   #58
violetblood

Windows 7 x64 Ultimate
 
 

If i plug the speakers in and tell it it's the Line In then i have no sound on pc at all.
In the pic i removed it but it didn't work.
My System SpecsSystem Spec
15 May 2010   #59
violetblood

Windows 7 x64 Ultimate
 
 

Please help.
My System SpecsSystem Spec
15 May 2010   #60
TimStitt

Windows 7 Ultimate 64 bit
 
 

Hi Violet,

Could you please let me know the version of the sound driver that you are using?

Also, take a look at my post here about sound settings in the PVR2000, this card is very similar and the configuration is exactly the same. Leadtek Winfast PVR2000 rtm driver

What's important is to check that the devices that youa re going to use work and are enabled in Windows 7 first, tick that box and then configure them in the PVR second.
My System SpecsSystem Spec
Reply

 Leadtek Winfast TV2000XP RM Drivers ?




Thread Tools




Similar help and support threads
Thread Forum
Leadtek WinFast TV 2000 XP (Deluxe), Windows 7 Pro 64 B
Hello everyone and thanks to take a little of your time ;) First, please excuse for my english i'm french but i will try to explain the best i can. I know there are already few subjects on this problem and i read them all in fact i read dozen of pages (on this forum and on others) since 2...
Drivers
Leadtek Winfast PVR2000 rtm driver
Hi all I have the Leadtek winfast pvr2000 tv card and it works under vista 32b without problems. I installed the seven rtm 32b and I met problems with this card.:cry: Windows 7 freezes with a black screen during channel scan. All is locked, no mouse, and keyboard led doesn't work respond...
Drivers
Leadtek Winfast DTV2000H, works in 7100 but not 7201
Hi folks. Great forum! Been reading for a while; first post now. Just upgraded from 7100 to 7201 (x64) and was informed by setup that my Leadtek Winfast DTV2000H TV tuner driver was not compatible. So I moved cxavsvid.sys (CX2388x X64 v5.0.18.6420) to allow setup to proceed. The upgrade process...
Drivers
Leadtek DTV 2000 H, incompatible with Win7! Solutions?
Hello, I recive this reply from Leadtek at my question regarding a Win 7 32 bit driver for DTV 2000 H: Thanks for your contact. Unfortunately, the chipset of it has already phased out. So the chip of it might not be supported to Windows 7. But you can try to use the driver for Vista to...
Drivers
Leadtek winfast a280
anyway I can get my old graphic card to work on windows 7? Ive tried the search and nothing is really showing up. thanks
Graphic Cards
Overclocking Leadtek PX8600GTS
i have a couple of things to ask about overclocking. 1.How to overclock a nvidia graphic card with riva tuner if you have a double boot.example.if i overclock a GPU on one OS,will it be overclocked on the other OS or i have to overclock the same value of everything i have overclocked on the other...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:28.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App