Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Just installed new win 7 ultima os

26 Nov 2013   #1
kaschiro

win 7
 
 
Just installed new win 7 ultima os

I have a dell inspinon 17r n7110...I just change to a samsung ssd hd and this thing really rocks! 15 sec boot time. I installed a new system, win 7 ultima and of course it was using it own drivers

Since it originally had the dell drivers in and now it has the generic W7 files in it, should I replace the the dell drivers? If so which ones?, so far I had to change out the display files. every thing seems to be working pretty good.

The dvd/cd does not autostart when I put in a cd disk, I have to go into explorer and click on startup, it used to be that is auto started when a disk was put in

Any suggestions?
regards,
Kas


My System SpecsSystem Spec
.
26 Nov 2013   #2
maxie

windows 7 home 64bit
 
 

Hi there .. Since your OS is working perfectly i would tend to leave it as it is .. As for your DVD player try the Driver from the Dell website ...
My System SpecsSystem Spec
26 Nov 2013   #3
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Just run windows update.

It`s a Dell, they tend to prefer the drivers from Dell
My System SpecsSystem Spec
.

26 Nov 2013   #4
kaschiro

win 7
 
 

Quote   Quote: Originally Posted by AddRAM View Post
Just run windows update.

It`s a Dell, they tend to prefer the drivers from Dell
I think I tried that it did not work, unless I did not push/click on the right buttons..when I ran it seems to take a long time and then the program just stops

I checked the hardward program and the only thing that is not cleared/check is SM BUS CONTROL I could not find find it..unless I am looking in the wrong Place

Need a hand
Kas
My System SpecsSystem Spec
26 Nov 2013   #5
maxie

windows 7 home 64bit
 
 

Hi there .. You need the Chipset Driver from Dell website ...
My System SpecsSystem Spec
26 Nov 2013   #6
kaschiro

win 7
 
 

Quote   Quote: Originally Posted by maxie View Post
Hi there .. You need the Chipset Driver from Dell website ...
Which one do I choose, where do I look in the hardware section
Kas
My System SpecsSystem Spec
26 Nov 2013   #7
maxie

windows 7 home 64bit
 
 

Hi there ... It should be the Intel Huron River (HM67), v.9.2.0.1015, A00 ... If your USB 3 Ports need Drivers you will find them in the Link below ....

Drivers & Downloads | Dell US
My System SpecsSystem Spec
27 Nov 2013   #8
kaschiro

win 7
 
 

Quote   Quote: Originally Posted by maxie View Post
Hi there ... It should be the Intel Huron River (HM67), v.9.2.0.1015, A00 ... If your USB 3 Ports need Drivers you will find them in the Link below ....

Drivers & Downloads | Dell US
Thanks, for the up date....I am not the brightest knife in the drawer, under which category am I going find the drivers for the usb 3
Kas
My System SpecsSystem Spec
27 Nov 2013   #9
maxie

windows 7 home 64bit
 
 

They are listed under the Chipset section
My System SpecsSystem Spec
Reply

 Just installed new win 7 ultima os




Thread Tools




Similar help and support threads
Thread Forum
Artec Ultima 2000 Scanner
Hi chaps... Bought this scanner off ebay for peanuts and having issues locating a compatable driver or even a driver at all it seems!! running 7 64 bit home any help would be awesome.... i googled that it was compatible first but folloing guides on various sites it doesn't seem to work......
Drivers
Windows10 Icon not visible - KB2952664 is installed but not installed?
Hello, I recently decided I would attempt to upgrade to Windows 10. However the icon was not visible. I thus googled the problem and found this site: Windows 10 Upgrade: How to Upgrade to Windows 10 ‚ Which states: "If you donít see it, visit our Q&A page for more info." directs you to:...
Windows Updates & Activation
installed HD 2600 pro card, installed AMS driver, but no ccc software?
I was wondering if this would help? https://www.sevenforums.com/graphic-cards/195195-fix-catalyst-control-center-ccc-will-not-open-install.html I see no evidence that the AMD driver installed at all. Right click desktop does not show ccc, and ccc is not in the lower right panel. Windows...
Graphic Cards
I am trying to install Win 7 on computer that already has Win 7 Ultima
I have a 4+ year old Dellxps435 which has Win7 ultimate as OS.This disc has so many problems I decided to install brand new Win ultimate on another disc. My problem is that I want to copy some info from the original disc which is still in the computer giving me 2 bootable discs. Is there some way I...
Installation & Setup
What is the point of buying Ultima?
Windows 7 - Buy and download from Microsoft Store Comparing Pro with Ultimate: Just being able to have non-English language support? the the useless BitLocker?
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:04.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App