Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: CSR8510A10 Driver, here available!

11 Sep 2016   #11
RAHS

Windows 7 Ultimate x64
 
 

Make sure the Bluetooth device shows up under "Devices and Printers" in Windows 7. If it shows up under the Bluetooth icon for those who show it in their Windows Control Panel, even though it indicates all services are operational, it will still NOT work. It needs to show under "Devices and Printers." Even then, when you RIGHT-CLICK on the Bluetooth Device icon, and click on 'Properties' to show a 'Services' tab, do NOT click the 'Headset' option. Doing this will create a 'Trouble-shooting' yellow warning triangle on your Bluetooth icon, and your device will NOT work. Apparently, 'Headphones' are NOT the same as a 'Headset' as far as Windows 7 is concerned. Leave it unchecked and then assign your choice of listening/microphone device as normal under the Sound icon where your Bluetooth device should show if it is a headphones/microphone device.


My System SpecsSystem Spec
.
11 Sep 2016   #12
RAHS

Windows 7 Ultimate x64
 
 

Here is a picture of the install disk that came with the Bluetooth 4.0 CSR (Cambridge Silicon Radio) usb dongle I purchased. I compressed and uploaded the drivers which are located at this link as an additional source for driver/install files. Hope this helps.

https://mega.nz/#!GMBGSaJD!r3slfcony...m0SX9pJcPchAiQ


Attached Thumbnails
CSR8510A10 Driver, here available!-csr_bt4.jpg  
My System SpecsSystem Spec
04 Mar 2017   #13
johncorosz

Both Windows 7 64 & Windows 10 LTSB
 
 

I joined this forum JUST to say THANK YOU! -

My PH-BTH3 Bluetooth Headphones trouble began with a driver update that 3DP (a driver finder program that is free but sometimes buggy). It found a new Toshiba Bluetooth Driver Stack update. I thought since it found many, many other drivers I needed and it fixed many issues I had in the past. So I was shocked when the Toshiba driver made a horrible popping in and out of sound but loaded the headphones fine. Sadly my original pairing of the headphones using the Windows update drivers had worked fine since day one. I simply went to "show all devices" and then selected "Add Bluetooth Device" and everything just worked!

So of course I needed to rollback and get rid of the Toshiba update (which should have been hassle free). I uninstalled and rebooted and the horror began!

My Bluetooth dongle is the CSR 8510 A10 (CSR8510A10). It was now showing the PH-BTH3 headphones as paired (within the CSR 8510 driver settings as well as all bluetooth driver references. The Toshiba driver had altered the way Windows loaded my drivers regardless of how I installed/uninstalled the Toshiba driver as well as trying the broadcom and Intel drivers. So now the headphones were not paired (but reboot after reboot there the headphones appeared listed in Windows even though I had already uninstalled, unpaired.

In fact I searched for over 2 months online for help. This is the common reply you get on most sites -

I never received a driver for my headphones as others have mentioned. So I thought there never was a driver for the PH-BTH3's as my head hones were new off Amazon this last Christmas (and most devices shipped like this generally assume you will update via Windows update).

So to resolve my "newly created issue" I knew I needed to delete every registry entry for the bluetooth drivers entries and that took so much time. Windows seems to have a hard time releasing devices in general but with Bluetooth it is especially sticky.

I had to search "PH-BTH3" in the registry. I had over 16 entries in the registry alone. In many folders within REGEDIT I was stuck having to take ownership of the folders, then I learned some folders are "placeholders" and cannot be deleted but you need to delete each entry in the folder that it allows (all but the top most entry will be deleted). If you miss just one of the driver references it will fail again on reboot and you will have to continue your search and deleting process.

THEN.... I had to go to Device Manager and change "View Settings" to "Show Hidden Devices" and then go into each hardware item and delete anything related to Bluetooth (I was amazed at all the entries including several "unknown devices") and my headphones appearing in the system folder.

So with all devices deleted from "Device Manager" and all "Registry Entries for the headphones and dongle" deleted.......
  1. - I rebooted and left the Bluetooth dongle unplugged.
  2. - Ran the driver installation (THANK YOU AGAIN!)
  3. - Rebooted the system
  4. - Plugged in the CSR 8510 A10 bluetooth dongle
  5. - Then rebooted (better to be safe, always).
  6. - Right clicked on the newly created bluetooth trayicon and selected "Enable" and added my headphones.

Things are perfect now and the headphones are sync'd like they had been before the Toshiba screw up. I certainly do hope that others with my problem find this post to aid them. I wish I could post this at the 25 or so sites with almost no good information I came across.

This issue exists for so many users and I noticed it is across all the platforms. I am on the Windows 10 LTSB OS and it seems about the process that you would use from 7 until 10.

Quick breakdown on registry editing, deleting, etc. When the basic removing device fails and uninstalling from device manager fails this is the process that WILL WORK! Be sure to read up on registry editing before jumping into it. You will need to run REGEDIT as an ADMIN (right click on REGEDIT icon and select "run as administrator" then you will heed to select "Edit, then Find now search for the headphone model number or the maker name as well as any other device that is giving you a lot of trouble (I mean after rebooting, after doing all the right things) and no other method is allowing proper functionality.

My System SpecsSystem Spec
.

05 Apr 2017   #14
Vikkij100

Windows 7 Home Premium 64
 
 

Thanks a million! I messed with this for hours until I found your post and another 15 min I was good. You made my day!!!!
My System SpecsSystem Spec
07 May 2017   #15
stevebonline

Windows 10 Home 64 bit
 
 

Thank you umkar466. This fixed my problem with an "unsigned driver" error resulting from corruption on my Register.
Really appreciated.
My System SpecsSystem Spec
29 Jul 2017   #16
zecharia

Win7 Pro SP1 x64
 
 

Like many other I just get Bluetooth radio, Enumerator, some network stuff but NO SPP, NO COM ports.
It can't even see the maker of the dongle which is csr8510a10, sold by LAIRD. No Service is detected.
But it does connect to the slave using a BT730 which is csr-module again. So what is wrong?
HP 280 G1, x64 Win7 Pro SP1. 16GB SRAM.
I removed the previous detection and inserted the BT820 dongle. When searching it found my slave and requested pairing which went ok. Then it all stops meaning no more can be done with it.
Also, the same dongle in an XP XP3 works perfect. BUT, the W7 can't see the XP and vice versa, which is remarkable.
Solution anybody?
My System SpecsSystem Spec
10 Aug 2017   #17
Chris01

Windows 7 Ultimate x64
 
 

Another success story! Finally, the headset is aliiiiiive! THANK YOU!!
My System SpecsSystem Spec
30 Sep 2017   #18
miksica

win 10 64 bit
 
 

Just registered to say thanks, i had the CD but don't have the CD reader ( who uses those anymore ), after hours of trying how to block generic Bluetooth i came to this article. Finished in 10 mins.

Thanks a lot

Mihailo
My System SpecsSystem Spec
19 Dec 2017   #19
koolx

10
 
 

Hi umkar466,

I got the CSR8510A10 BT dongle. I also got the CD but I dont have a CD reader. Is the driver on the CD the same that comes by default on the dongle?
My System SpecsSystem Spec
01 May 2018   #20
BlackSER

CA
 
 
CSR8510-A10 w/ Windows 10 v1709

I just registered to this forum and want to Thank you so much for this. I'm a current ebay seller that needs to take pictures with my phone then upload them to my Windows 10 computer. Taking pictures with my phone then having to manually accept all files via Bluetooth on the PC was a headache. My business has been ramping up and I was at the verge of replacing my Bluetooth dongle due to this headache. I searched for an updated Bluetooth driver and came upon your post. and OMFG!!!! you saved me. I was so thankful that the mega link was still valid and I downloaded it and now i am at peace. The driver now allows for it to automatically accept all incoming pics from my phone via the new bluetooth settings.

FYI I am on a Windows 10 with v1709 (Fall Creators update) and this worked flawless. Once again thank you OP you saved my sanity. If anyone is curious I have the a USB dongle w/CSR8510-A10 then just downloaded the x64 folder as a zip via the mega link. WOW!
My System SpecsSystem Spec
Reply

 CSR8510A10 Driver, here available!




Thread Tools




Similar help and support threads
Thread Forum
No Drivers Found. Click Load Driver to Provide Mass Storage Driver....
Hi all, I'm getting the above error when trying to do a clean install of Windows 7 from a USB drive using the Rufus program for the ISO. I've tried everything I have found online and nothing works: 1. normal boot from a W7 ISO formatted as NTFS using Rufus - same error :shock: 2. Shift +...
Installation & Setup
Bluetooth dingle BT820 (csr8510a10) not working in Win7
Hi, this problem makes me nuts. My HP 280 G1, x64, Win7 Pro SP1 has no built in BT, so I bought the BT820 from Laird and it is built on the csr8510a10 chipset. It is said to not require any additional driver, but uses the native in Win7. Well, I connect it and yes, it installs. I Power my BT...
Drivers
Windows Driver Foundation User-mode Driver Framework service is Manual
Hi, All of a sudden the Windows Driver Foundation - User-mode Driver Framework service is set to Manual in Services. I clean installed Windows 7 a few weeks ago and my system is clean (as far as clean goes) as in only 15 programs installed (of which 5 x NVIDIA). I use this computer for work...
Drivers
Multiple BSOD. Driver Verifier Driver caught a driver corrupting
I have had BSOD for a while and being super busy I did not have time to look at it and get it fixed. Well Being a computer guy I assumed I could fix it myself. But with tons of research and trying to use every guide I can find I decided to try here(probably should have came here first). Today I...
BSOD Help and Support
No drivers found. click load driver to provide a mass storage driver f
Okay so, my laptop's system is unable to boot, so I just tried to format it since I have to do that for a very long time, and when it asked me in which partition I want to install windows there was nothing, although when I clicked "Load Driver" I could access the hard disk's files, the hard disk IS...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:05.
Twitter Facebook Google+