Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Scanner Bearpaw 2448cu PRO

05 Nov 2009   #1
actarus

W7
 
 
Scanner Bearpaw 2448cu PRO

Hi. I'm looking for a working driver for this scanner.... Can somebody help ?


My System SpecsSystem Spec
.
05 Nov 2009   #2
torrentg

7600.20510 x86
 
 

Right click on it in device manager. Properties. Details tab. Change dropdown to hardware ids. Copy and paste the info to here.
My System SpecsSystem Spec
05 Nov 2009   #3
actarus

W7
 
 

USB\VID_055F&PID_0408&REV_0100
USB\VID_055F&PID_0408

Those are the 2 inputs I have... Sorry but my W7 is in French. Hope I did get the good ones
My System SpecsSystem Spec
.

05 Nov 2009   #4
torrentg

7600.20510 x86
 
 

http://www.mustek.com.tw/apprg/showd...8CUPro&LSID=39

Get the Vista driver.

Extract from that.

Right click on scanner in device manager. Update driver software. Browse. Let me pick. Have disk. Browse. Now find the .inf in extracted folder. Double click on it. Hit ok and let it install.
My System SpecsSystem Spec
05 Nov 2009   #5
actarus

W7
 
 

64 bits
My System SpecsSystem Spec
05 Nov 2009   #6
actarus

W7
 
 

I actually already did this, but it doesn't extract itself, it starts automatically the installation. And after.... Still not working ?!
My System SpecsSystem Spec
29 Jun 2014   #7
DemianAct

win7
 
 

This worked for me win7 64 bit :

Mustek Products - BearPaw 2448TA Plus II

and

Mustek Support
My System SpecsSystem Spec
Reply

 Scanner Bearpaw 2448cu PRO




Thread Tools




Similar help and support threads
Thread Forum
Cannot communicate with the scanner
Hi all I have just purchased an Epsom SX130 When selecting Epson Scan, I get the following error message: 'Cannot communicate with the scanner' I have turned the printer off and back on again. Removed the power lead and plugged back in.
Hardware & Devices
scanner help
I have Epson 4490 scanner that is connected to one computer running windows 7.In the same room I have another computer using windows xp.I want to be able to use the scanner on both.I have tried to install the software on the xp one,but it will not open the scanner.Just says it cannot be started.Is...
Hardware & Devices
USB Scanner
I have no idea weather this is from the stone-age or not, but I got told to try a scanner out while clearing the girlfriend's loft (attic) out, and i cant find any vista/7 drivers for it anywhere. MAKE - TRUST MODEL - DIRECT WEBSCAN 19200 this is a pureUSB device (usb connected AND usb...
Hardware & Devices
Scanner?
This is something that I only use once in a blue moon, but the moon is now a royal blue. My old HP 5510v printer was designed to use HP software for scanning and other purposes, but only in x32. This wasn't a problem with XP x64. because it has a Scanner and Camera Wizard, in the Control Panel...
Hardware & Devices
new scanner
hi all amthinking of buying a new scanner to run on thelaptop using 7. can anyone point ne to a fully compliant device that is reasonably priced thanks all in advanced fried head. not boiled, not pickled just fried:mad:
Hardware & Devices
Windows 7 drivers for Mustek BearPaw 1248 CU
Hi, buddies. I have an obsolete Mustek BearPaw 1248 CU. I can't use it at the moment 'cause I bought a new PC with Windows 7 OS. I have contacted the official Mustek website and they told me no update will be launched for this obsolete scanner. However, they mentioned I could get it from third...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:20.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App