New
#1
Drivers after reformat
I need some advice and recommendations please on how to identify the specific drivers (and possibly utilities) that should be installed after a reformat and fresh install of the OS, and those that can safely be ignored. I’m aiming for as uncluttered a system as possible.
On my first attempt, things went badly wrong as soon as the OS was loaded. The problems I’ve encountered included Windows Update failing to install all important updates, including IE 11, intermittent internet connection drop-outs and failures to open web pages and the BSOD appearing for no apparent reason. I have no reason to suspect that there any hardware issues and am wondering if I’ve installed the wrong or conflicting drivers.
My hardware is:
Gigabyte Z77X-DH3 MoBo
Intel i7 3770K chip
16 GB DDR3 Ram
Gainward Nvidia GeForce GTX 670
Kingston 112GB SSD
3 x Seagate 2TB SATA hard drives
Pioneer DVD-RW
LG Blu-ray drive
There is no separate sound card as yet.
Gigabyte’s MoBo User’s Manual does not sufficiently explain many of the features of the MoBo nor the problems I’ve encountered.
I have flashed the BIOS to the latest version available.
The OS is Windows 7 Home Premium 64bit SP1
I intend to put the OS and as little else as possible on the SSD (drive C). The first Seagate 2 TB drive has been formatted and is totally clean and will be home to all my applications and anything else that would normally go on ‘C’. The other 2 drives are intended for data and back up.
The Newegg TV series on building a PC, which has been widely praised in several forums, was very helpful insofar as it went. But I’m confused about just what Gigabyte MoBo drivers need to be installed.
These are the listed Driver downloads as appearing on the latest Gigabyte web page for my MoBo (revision1.0) and OS Windows 7, 64bit
“AUDIO
VIA audio driver
(Note: please reflash the latest BIOS before update VIA audio driver)
CHIPSET
Intel Management Engine Interface
Intel INF Installation
LAN
Atheros LAN Driver
SATA RAID/AHCHI
Intel® Rapid Storage Technology
Intel SATA Preinstall driver
(For AHCI / RAID Mode)
Note: Press F6 during Windows setup to read from floppy.
Marvell Preinstall Driver
Note: Press F6 during Windows setup to read from floppy.
Marvell Storage Utility
Marvell SATA Controller Driver
USB3
VIA USB 3.0 Driver
Intel USB 3.0 Driver
VGA
Intel VGA Driver (for Ivy Bridge CPU)
Intel VGA Driver (for Sandy Bridge CPU)”
Apart from the 2 chipset drivers and the LAN driver I’m not sure which of the others should be installed.
First, is the VIA audio driver required? No other audio driver is mentioned and this driver is only available because I’ve updated the BIOS (although I had audio, presumably the basic windows 7 version, before the reformat). What exactly is VIA?
Secondly, as I don’t intend setting up a Raid array, do I need any of the drivers under the SATA RAID/AHCHI heading? In particular, I’m completely mystified as to what the Marvell items do?
Thirdly do I need both USB drivers or will the Intel one suffice? Again what is the VIA driver for?
Newegg doesn’t mention VGA at all but I assume I need to install the VGA driver for Ivy Bridge CPU?
As far as my video card, a Gainward Nvidia GTX 670, goes, I’m not exactly sure which version of the GTX 670 I have. But am I right in thinking that I can simply install GeForce_Experience_v2.4.3.31 and the latest driver released a few days ago by Nvidia for the GTX 670 series - 352.86-desktop-win8-win7-winvista-64bit-international-whql , from the official Nvidia site rather than using the old and now out of date driver and utility disc supplied by Gainward ?
Is it safe to install all these drivers (which I can download from another PC) and running Windows Update before installing an anti-virus app? I’ve a suspicion that the anti-virus app (Avast) may have interfered with my first attempt.
Finally, is it usual for some Windows Updates to fail? I use Chrome as my browser but it was a bit disconcerting to find Internet Explorer 11 not just failing to install but causing crashes.
Thank you everyone for your patience in reading all this. I do very much forward to your replies.