USB video capture driver problem  

Page 1 of 2 12 LastLast

  1. Posts : 3
    windows 7
       #1

    USB video capture driver problem


    i was using the usb easycap video capturing device

    USB Video Capture Devices - Convert Video to Digital

    and the usb video capture driver on windows xp perfectly using Ulead video studio software.

    but when i changed to windows 7 i cant find the usb video capture driver so i cant use the easycap device...

    help anyone?
      My Computer


  2. Posts : 5,747
    7600.20510 x86
       #2

    Right click on it in device manager. Properties. Details tab. Change dropdown to hardware ids. Copy and paste the results to here and please do not use a screenshot as alternative.

    Is this x86 or x64? We'll find a driver if one exists.
      My Computer


  3. Posts : 3
    windows 7
    Thread Starter
       #3

    thank u for the quick reply...

    i did what u asked me and here it is :

    USB\VID_05E1&PID_0408&REV_0005&MI_00
    USB\VID_05E1&PID_0408&MI_00


    and i am running a windows 7 x86 (i am not very much technical but i have 2 program files folders one of them is just program files and the other is program filesx86)

    i really hope u can help me people because capturing video from other devices is very essential to my work.....

    appreciate ur help
      My Computer


  4. Posts : 3
    windows 7
    Thread Starter
       #4

    i have look into my system information and it said that it s a x64 - based pc !

    i dont know if this is 64 or 86 :
      My Computer


  5. Posts : 2
    Windows 7 x64
       #5

    ssarcastic said:
    i was using the usb easycap video capturing device

    USB Video Capture Devices - Convert Video to Digital

    and the usb video capture driver on windows xp perfectly using Ulead video studio software.

    but when i changed to windows 7 i cant find the usb video capture driver so i cant use the easycap device...

    help anyone?
    I have the exact same Capture device and the same OS. Use these > drivers <
      My Computer


  6. Posts : 1
    windows 7 x64
       #6

    Did anyone manage to find any compatible software for this device?
    I downloaded and installed the driver as suggested in an earlier post and it said that it had accepted it but I still can't get any video to stream.

    Neoxalucard, you said that you have the same OS and device, what software do you use?

    (I contacted the manufacturer about the device and they said that there is no support for a windows 7 x64 driver.)

    Andrew
      My Computer


  7. Posts : 2
    Windows 7 x64
       #7

    The manufacturer say's there is no support for Win 7 x64, because they don't want to bother to write the 64bit drivers. Luckily the easycap is somewhat generic. That's why I'm using Sabrent's drivers you can get them here http://www.sabrent.com/drivers/USB-A...p_For_Win7.zip

    As far as software, aside from Win movie maker and Win live movie maker. It's not that it wasn't compatible, I just don't see an option to capture or import from capture device on either. I have used the easy cap on just about everything else. Haven't had a problem on the software side.

    Here it is my PS2 in VLC hooked up to my easycap. Make sure you set the right source in properties NTSC and composite for me.
    USB video capture driver problem-capture1.jpg

    Bam, it worked.
    USB video capture driver problem-capture2.jpg

    Again in logitech vid. See, its set to tuner by default.
    USB video capture driver problem-capture3.jpg

    Just change to composite and we're all good.
    USB video capture driver problem-capture4.jpg

    On a side note, although not spacifily supported, it does work with DScaler. DScaler - Home <--Careful with that if you do use it, I hear it can eff up you're capture device if you don't know what you're doing.
      My Computer


  8. Posts : 63
    win7
       #8

    Just about to try these drivers on the 4 channel DVR security version, will report back...

    Just waiting for my salty wet string internet connection...
      My Computer


  9. Posts : 63
    win7
       #9

    Tried them...
    says its a stk1160 and a atv usb2 video capture device, but only seems to see first video input, in acitive webcam it gives options for tuner svideo and composite, selecting composite sets it to video 1, other options give a blank screen.


    Its a start.....
      My Computer


  10. Posts : 63
    win7
       #10

    just an update failed to get all 4 capture channels working, only the first one.


    going back to windows xp on an semi duff laptop to use a webcam server/nas
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 02:40.
Find Us