Driver issue USB Mass Storage Device  

Hello April now can you do this please
Now before we can help we do need to know what is in your machine so please do this System Info - See Your System Specs
or either enter the specs of your system in your forum profile the specs will appear when we click on that little box bottom left of the post screen it is for me the preferable option as it is easy. As you may appreciate it is very hard when you don’t know what one is working with for example a diesel or petrol engine.
*(pretyped to save time)

As you were asked for permission I am assuming you are logged in as the admin? Plus I am again assuming you have done a sfc and chkdsk if not worth a try in safe mode.
SFC /SCANNOW Command - System File Checker
Disk Check < if necessary include the /f switch and if this does not make any improvement then just run this switch instead /r in the command line as per Option2
Run these in safe mode and the sfc often best run for two to three runs – you can leave out the /r switch in ckdsk if you feel it not necessary

I also have to ask how old is this machine and if it is one you have had for a while what have you added or installed since those storage devices last worked?

Did not you try to uninstall the driver and use another free software to help you scan your computer, maybe it will help you. Because not every time, the Microsoft will recommend you the latest or the right driver for you. And obviously, it is the problem of usb mass storage device driver. So try to use another way to get drivers first. Wish it can help you.

I agree but I would rather know what that machine has in it so we can link the manufacturers site and it has now been a week since I first answered the posted thread.
So until we hear back there is not much we can do

The problem is a bit different now I have an unknown usb device in my device manager which has been stopped because it cause problem. I uninstalled and then scanned for hardware changed but the drivers would not reinstall. The only thing that was connected today was my printer si I assumed it was the printer. I updated and installed the new printer drivers but I still have this issue. It fixes with a reboot for a short time then i get message something like and unknown device has been disabled

If this issue prevails i.e after it happens and before it is fixed with reboot any camera or USB reader plugged into USB will not be recognised. I have to reboot to fix the error and then the camera will be recognised.Rebooting is not convemient. i have a virtual windows running inside this so have to reboot two. How can i find what the unknown device is? It says consul with device manufacturer but i do not know the device

Ok now I cannot find any driver support for this machine as the site is an Audi outlet and from memory the brand Medion is their own, and it would be anyone's guess where it was actually made or who made it, in nay case probably in China somewhere.

Also being six years old and it is throwing that code 43 error I am thinking it may be wear and tear on that particular USB port. One thing you can do is to get a very bright light example one of those small cheap LED torches (I find them perfect for this) and look into each port for signs of any damage or wear and tear.

Going on from my first comment the only way to find what the motherboard actually is is to run the HW Info program. You can do this if you want to it takes very little time to install this excellent program and find what components you actually have inside the machine because as I said the Medion site is hopeless.
The choice is yours of course.
Using HW Info
PART A:
You can test the volts on the PSU with HW Info HWiNFO - Download < download the right bit version and close the right hand window select Sensors and scroll down to the power section where you will see what the volts are doing see my pic. In my pic the section (Nuvoton) with VBATT as a dead give away you are in the section for the rail voltages. There are other section titles and one that pops up often is ITE (sometimes the usual one for Gigabyte boards)
Now the voltage on the different rails have to be within 5% =+/- of what is required or the machine will not work properly if at all.
Limits +/- (minimum - correct - maximum)
12v1 = 11.4 - 12 - 12.6v
12v2 = 11.4 - 12- 12.6v
5v = 4.75 – 5 - 5.25v
3.3v = 3.135 – 3 – 3.465v
-12v = -10.80 - -12 - -13.20v
+5VSB = 4.75 – 5 - 5.25v
The Power good signal voltage at pin 8 on the 24 pin plug (grey cable) should be the same as the 5v rail reading/s
See this for the rail voltage info
PSUs 101: A Detailed Look Into Power Supplies (Section 2.)
The original right hand window shows the machine running and is handy for that but for looking at the components in some detail close it and use the main left hand side panel
FOR OTHER COMPONENTS
PART B:
Open each small square with + in it on the section the components are in and then click on the individual component/s (it will highlight in blue) - in the right hand side will appear all sorts of details including brands speeds and other essential info that particular device. See pic for example.

Use PART B: and see my pic for where to look

Edit: I meant to add we can also find out info on what the USB ports are or type.