Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: NVME driver for Adata XPG SX8200 pro

31 Dec 2018   #1
NMAcct

Windows 7 Ultimate x64
 
 
NVME driver for Adata XPG SX8200 pro

I purchased an Adata XPG SX8200 pro 1tb m.2 ssd. After install into the m.2 slot the drive is listed in the BIOS as an NVME drive but in Windows 7 it shows in device manager as a "PCI device" and has the "!" next to it. Under properties it shows that Windows cannot find a driver for this hardware. Of course the Adata website is no help.


My existing boot drive is an nvme Intel 750 series ssd in a pcie slot. Therefore, I already have Windows 7 working fine on a nvme drive which means I had modified W7 2 years ago to get the Intel 750 to work. Since my Asrock Z270m pro 4 motherboard supports nvme drives and I already have one such drive working, I thought the new drive would work under W7.


I've searched for a generic Microsoft nvme driver with no success. Also, the new drive supports the newest NVME 1.3 verson while the Intel is a NVME 1.0 version drive. Any thoughts to try before I return this new drive as being incompatible? Thanks in advance!


My System SpecsSystem Spec
.
31 Dec 2018   #2
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

More likely you will get answer on thread you posted on at winraid forum.

I am assuming you must have already installed the two MS nvme hotfixes?


nvme-driver-nvme-win7x64.zip

nvme-driver-nvme-win7x86.zip

SSD not being detected in Win 7 - [Solved] - Storage
My System SpecsSystem Spec
01 Jan 2019   #3
NMAcct

Windows 7 Ultimate x64
 
 

SIW2, thank you and thank you again.

I had not been able to find those MS hotfixes because as you know MS has taken them down. After I installed them and restarted, I went into device manager and updated the driver for that "PCIe device" at which time it installed a "Standard NVM Express Controller" which is no doubt the MS nvme version. I then went into "disk managment" and initiated the Adata ssd. I can now use the new drive!

Thanks for responding with the hotfixes.
My System SpecsSystem Spec
.

01 Jan 2019   #4
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

You're welcome.
My System SpecsSystem Spec
12 Jan 2019   #5
semy

Win 7 x64 HP
 
 

Quote   Quote: Originally Posted by SIW2 View Post
You're welcome.
Man, you dont even know how much You saved me from becoming a nut because of searching solution for the same problem. This is beyond this universe how i am thanks to You :)
My System SpecsSystem Spec
12 Jan 2019   #6
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

My System SpecsSystem Spec
12 May 2019   #7
naigaxeon

window 7 ultimate 64x
 
 

thanks the post SIW2 its make me feel good now~
My System SpecsSystem Spec
Reply

 NVME driver for Adata XPG SX8200 pro




Thread Tools




Similar help and support threads
Thread Forum
Nvme Driver
I have just got a HP SSD EX920 M.2 Nvme drive. I have windows 10 install on it and I run both Windows 7 & 10. Everything is fine in Windows 10 that I see all the drives. But in Windows 7 I can't see the new Nvme drive. It tried to install it. But in Device Manager it is showing up as a PCi Device...
Drivers
Adata hv620
HV620... help please,.. i am unable to access my HV620... when i plug it in the computer it tells me to format it, i did try to format it but windows was unable to format it... i tried using disk management but it still could not format it... is has a problem also of incorrect parameter.... ...
General Discussion
Can't update firmware on ADATA S510 SSD
I have an ADATA S510 120gig SSD, i tried downloading the Firmware upgrade tool seen on this page S510 SATA 6Gb/s Solid State Drive, Download, S510, 500 Series, Solid State Drive, Welcome to ADATA I opened the tool and it didnt find my SSD drive. I then downloaded the file itself to try and...
Hardware & Devices
Adata Flash USB 3.0 Stops working!
Hi guys, I currently bought this Adata USB 3.0, I loved it, and then about 2 days it just stopped working. I own a mac and a pc and tried using it on both of them, no luck. It seems to recognize the USB but it does not show up on "my computer", which is really weird. I appreciate if you guys...
Hardware & Devices
Drivers for my Adata S599 SSD?
Anyone know where I can get drivers for my SSD? It's this one: Newegg.com - A-DATA S599 AS599S-64GM-C 2.5" 64GB SATA II Internal Solid State Drive (SSD) I have a screen shot of the drivers that Microsoft installed, but those can't be my best choice. And Adata hasn't responded to my emails.
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:33.
Twitter Facebook