Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Someone For the Love of God HELP ME PLEASE!!

26 Dec 2009   #31
iseeuu

 
 

Quote   Quote: Originally Posted by psmith84 View Post
lol i always put a fresh install on laptops i get to get rid of the crapware that always comes with em. so it came installed with 7, i reinstalled 7. also i have had it online and done the update (thats what i spent ALL of christmas eve and christmas doing... trying to make this amazing machine do amazing things). i have been googling this whole time and somewhere it said that nvidia raid controllers can conflict with newer windows 7 builds. idk losin my mind here.

on an unrelated side note... the spell checker for this forum underlined christmas but not googling. technology is getting out of hand.
Right, I saw that. Sager says it is Windows 7 ready, and arrived with 7 installed. Did you have any of these issues with the factory installed 7?

Your error report suggested it was your graphics card causing the problem, so unless "Device Manager" is showing a problem with the RAID drivers, I would not be concerned with them as yet. If you haven't already, click the start button and type Device Manager: are there any issues showing there?

Christmas should be capitalized.


My System SpecsSystem Spec
.
26 Dec 2009   #32
Ryan2320

Windows Seven x64
 
 

Have you gone into Device Manger, and see if any drivers are not working.? (like your Video Card)

To do that click the start button and type Device Manger and hit enter.

Hope this Helps.

EDIT: Same Question as iseeuu
My System SpecsSystem Spec
26 Dec 2009   #33
psmith84

Windows 7 Ultimate
 
 

To be honest i didnt do much with the factory installation. turned it on looked at the pretty startup screens at 18.4" HD and said... cant wait to reinstall windows and do 60FPS on crysis very high lol. i was in a little bit of a hurry to get gaming with it lol. as a last ditch effort i just formatted the drive and started fresh with the drivers.
My System SpecsSystem Spec
.

26 Dec 2009   #34
iseeuu

 
 

Quote   Quote: Originally Posted by psmith84 View Post
To be honest i didnt do much with the factory installation. turned it on looked at the pretty startup screens at 18.4" HD and said... cant wait to reinstall windows and do 60FPS on crysis very high lol. i was in a little bit of a hurry to get gaming with it lol. as a last ditch effort i just formatted the drive and started fresh with the drivers.
That tells me that Sager has all the correct drivers and software to run the laptop in a stable platform. Now you just need to weed out the individual conflicts causing your issues. No problem! You just may need to get the software / drivers directly from Sager's web site, when you have Internet access.
My System SpecsSystem Spec
26 Dec 2009   #35
psmith84

Windows 7 Ultimate
 
 

Ok i reinstalled windows from disc, didnt install any of the drivers that came with the computer. I within 10 minutes of starting windows i went to the event viewer and found 21 warnings and 4 errors.

Error - Event ID 7000: Software Protection service failed to start due to the following reason: service did not respond to the start or control request in a timely fashion

Error - Event ID 7009: Timeout reached (30000 milliseconds) while waiting for the Software Protection service to connect.

Error - Event ID 512: InitializePrintProvider failed for provider inetpp.dll. This can occur because of system instability or lack of system resources.

Error - Event ID 1001: Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address (bunch of freakin numbers). The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.

Warning - Event ID 1008: The Windows Search Service is starting up and attempting to remove the old search index.

Warning - Event ID 219: The driver \Driver\tunnel failed to load for the device ROOT\*ISATAP\0000.

(17 of these) Warning - Event ID 129: Reset to device, \Device\RaidPort0, was issued.

(2 of these) Warning - Event ID 15: The embedded controller (EC) returned data when none was requested. The BIOS might be trying to access the EC without synchronizing with the operating system. This data will be ignored. No further action is necessary: however, you should check with your computer manurfacturer for an upgraded BIOS.

Then there were 831 information events. Screw typing that. Please let me know if this helps at all.
My System SpecsSystem Spec
26 Dec 2009   #36
iseeuu

 
 

Quote   Quote: Originally Posted by psmith84 View Post
Ok i reinstalled windows from disc, didnt install any of the drivers that came with the computer. I within 10 minutes of starting windows i went to the event viewer and found 21 warnings and 4 errors.

Error - Event ID 7000: Software Protection service failed to start due to the following reason: service did not respond to the start or control request in a timely fashion

Error - Event ID 7009: Timeout reached (30000 milliseconds) while waiting for the Software Protection service to connect.

Error - Event ID 512: InitializePrintProvider failed for provider inetpp.dll. This can occur because of system instability or lack of system resources.

Error - Event ID 1001: Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address (bunch of freakin numbers). The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.

Warning - Event ID 1008: The Windows Search Service is starting up and attempting to remove the old search index.

Warning - Event ID 219: The driver \Driver\tunnel failed to load for the device ROOT\*ISATAP\0000.

(17 of these) Warning - Event ID 129: Reset to device, \Device\RaidPort0, was issued.

(2 of these) Warning - Event ID 15: The embedded controller (EC) returned data when none was requested. The BIOS might be trying to access the EC without synchronizing with the operating system. This data will be ignored. No further action is necessary: however, you should check with your computer manurfacturer for an upgraded BIOS.

Then there were 831 information events. Screw typing that. Please let me know if this helps at all.
Yeah, don't type all that. Do you have a "Sager Restore Partition" or restore DVDs?
My System SpecsSystem Spec
26 Dec 2009   #37
psmith84

Windows 7 Ultimate
 
 

Yes the recovery disc came with the computer.
My System SpecsSystem Spec
26 Dec 2009   #38
iseeuu

 
 

Quote   Quote: Originally Posted by psmith84 View Post
Yes the recovery disc came with the computer.
Just a thought: you could restore the factory 7 then instead of a wipe and reinstall, do a install repair or even a custom install. A custom install will put all the factory files in a windows.old folder on the new 7 and would perhaps allow you to use them to correct issues?

Lots of step by step here: Repair Install

?
My System SpecsSystem Spec
26 Dec 2009   #39
psmith84

Windows 7 Ultimate
 
 

wipe and reinstall is already done. i posted the initial warnings and errors that i got with nothing done to the computer except a completely fresh install of windows
My System SpecsSystem Spec
26 Dec 2009   #40
iseeuu

 
 

Quote   Quote: Originally Posted by psmith84 View Post
wipe and reinstall is already done. i posted the initial warnings and errors that i got with nothing done to the computer except a completely fresh install of windows
Right ... undo the wipe and reinstall with a restore to the Factory installed 7? Then keep all the working drivers by doing a repair install instead of a wipe and install?
My System SpecsSystem Spec
Reply

 Someone For the Love of God HELP ME PLEASE!!




Thread Tools




Similar help and support threads
Thread Forum
I love to +rep
Just think about it you can find a thread, look thru it find out what was the bad , the process of helping,comments back and forth, the end where all the ying and yang is balanced and the world is right again and then you get to add +rep to some one who has done a great job, it is rare...
Chillout Room
Second love
Hi, Well it happened, I knew it would. :cry: This weekend my wife came up to me and said 'Its me or that thing!'. :mad: The thing of course is the new computer that I brought recently. Windows 7 64bit, sleak black body and quad core processing with a little cheeky GPU to boot. Well unknown...
Chillout Room


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:41.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App