New
#1
Intel Matrix Storage Manager Update 8.8.0.1009
Download Software, Drivers and Utilities FiltersSupports SATA RAID 5/10 on specific desktop platforms, SATA RAID 0/1, AHCI, and matrix RAID on specific desktop and mobile platforms
Download Software, Drivers and Utilities FiltersSupports SATA RAID 5/10 on specific desktop platforms, SATA RAID 0/1, AHCI, and matrix RAID on specific desktop and mobile platforms
when i try to install but ikeep getting this message this computer does not meet the minimum requirements for installing this software does that mean that my computer does not need it or is it because its windows seven i have a SATA hard drive not sure about the dvdrw and is an Intel 945 GMA chipset
Its not a matter what northbridge you have, its a matter what southbridge you have. This is for ICHx chipset, however even if you have it i think you need to have raid or ahci mode on to install this (im not sure, because since begining im runing raid/ahci and never tryed ide emulation mode).
ok well there is no option for that in my bios it says under IDE ATA/ATAPI 82801 GBH/GHM(ICH&-M Family) Serial ATA Storage Controller - 27C4
Last edited by 32dave; 23 Mar 2009 at 17:10. Reason: added info
32dave, try installing in compatibility mode if you have a raid array, otherwise, you don't need to install it.
Please check the following topic which was written for your reference. I'll
finish it as soon as possible.
http://tw.myblog.yahoo.com/jw!mZZPvh.FHxgV2AHuEi89Phs-/article?mid=1902&prev=-1&next=1887
Hope it helps,
Last edited by woolswell; 23 Mar 2009 at 21:35. Reason: correct
I tried both i don't have that device so i guess this computer doesn't have that option thank you both for your help
it messed up one of my hard drives. i'm not sure which one of them but it spins down and powers off and system doesn't respond after that. just uninstalled and everything is just fine.
back to 8.7
HARDWARE:
Intel desktop board: DX50SO
Processor: i7-975 3,30GHz
Memory:Kingston DIMM SDRAM 1,5V DDR3 Non-ECC 240 Pinos 1600MHz 2GB
Video board: Nvidia Quadro FX3700
Hard drives: Four Seagate 1.5TR
SOFTWARE to be installed:
Microsoft Office 2007
AutoCAD 2010
Autodesk 3Ds Designer 2010
My question is how to instal an Intel Matrix Storage on inicial setup;
That is