quadro nvs 110m and a 120m driver needed for dell d820  

Page 1 of 3 123 LastLast

  1. Posts : 11
    Windows 7 64 bit
       #1

    quadro nvs 110m and a 120m driver needed for dell d820


    I am looking for a driver that will rune on my laptop. I have just installed Windows 7 64-bit on my laptop. Here are the specs:

    Name: Standard VGA Graphics Adapter
    Chip Type: Nvidia
    DAC type: 8-bit
    Main driver: vga

    The Nvidia website has given some problems. I can't find what driver i need to download for my system. It keeps telling me that I don't have the correct windows OS to run the installer... Any help?
      My Computer


  2. Posts : 11,408
    ME/XP/Vista/Win7
       #2
      My Computer


  3. Posts : 6,243
    win 7 ultimate32bit, Win8.1pro wmc 32bit
       #3

    link to the latest nvidia note book drivers Drivers - Download NVIDIA Drivers please give us a little more info on your graphics card and we may be able to help you further
      My Computer


  4. Posts : 28,845
    Win 8 Release candidate 8400
       #4

    blindershredder said:
    I am looking for a driver that will rune on my laptop. I have just installed Windows 7 64-bit on my laptop. Here are the specs:

    Name: Standard VGA Graphics Adapter
    Chip Type: Nvidia
    DAC type: 8-bit
    Main driver: vga

    The Nvidia website has given some problems. I can't find what driver i need to download for my system. It keeps telling me that I don't have the correct windows OS to run the installer... Any help?
    Any chance you could tell us what kind of computer so we can look for a driver for you?
      My Computer


  5. Posts : 11
    Windows 7 64 bit
    Thread Starter
       #5

    wow lots of replies.. alright. i have a Dell latitude D820 laptop. i have run SIW to figure out exactly what i have... and it's not that specific... here's what SIW gives me:

    for "Standard VGA Graphics Adapter"

    Property Value
    Device ID PCI\VEN_10DEDEV_01D7SUBSYS_01CC1028REV_A1\42937158200008
    Status 0x0180200a Started
    Problem 0x00000000 (0)
    Service vga
    Capabilities 0x00000000
    Config Flags 0x00000000
    Class Display
    Manufacturer (Standard display types)
    Hardware IDs PCI\VEN_10DEDEV_01D7SUBSYS_01CC1028REV_A1
    PCI\VEN_10DEDEV_01D7SUBSYS_01CC1028
    PCI\VEN_10DEDEV_01D7CC_030000
    PCI\VEN_10DEDEV_01D7CC_0300
    Compatible IDs PCI\VEN_10DEDEV_01D7REV_A1
    PCI\VEN_10DEDEV_01D7
    PCI\VEN_10DECC_030000
    PCI\VEN_10DECC_0300
    PCI\VEN_10DE
    PCI\CC_030000
    PCI\CC_0300
    Class GUID {4d36e968-e325-11ce-bfc1-08002be10318}
    Location PCI bus 1, device 0, function 0
    Bus number 0x00000001
    Enumerator name PCI
    Description Standard VGA Graphics Adapter
    Driver {4d36e968-e325-11ce-bfc1-08002be10318}\0000
    Physical Object Name \Device\NTPNP_PCI0016
    Bustype GUID {44203042-2046-4245-2043-382031302042}
    Legacy bus type 0x00000005
    Install State 0x00000000
    Device Address 0x00000000

    Device Configuration File display.inf
    InfPath display.inf
    InfSection vga
    ProviderName Microsoft
    DriverDateData 00 80 8C A3 C5 94 C6 01
    DriverDate 6-21-2006
    DriverVersion 6.1.7600.16385
    MatchingDeviceId pci\cc_0300
    DriverDesc Standard VGA Graphics Adapter
    FeatureScore fe

    Class Display
    ClassDesc @DispCI.dll,-3100
    Display adapters
    IconPath %systemroot%\system32\setupapi.dll,-1
    Installer32 DispCI.dll,DisplayClassInstaller
    LowerLogoVersion 6.0
      My Computer


  6. Posts : 11
    Windows 7 64 bit
    Thread Starter
       #6

    I have also tried those nvidia drivers. Every time I try to run the installer an error shows up telling me that I am not running a version Windows Vista 32/Windows 7 64. So, I am still not quite sure what I am doing wrong.

    Idk if this is pertinent or not: I had a new hard drive installed yesterday and then installed XP using the disk that came with my laptop. My laptop came with a drivers disk, but I did not run it. I just upgraded to Windows 7 as soon as I could... So if this helps at all...
      My Computer


  7. Posts : 6,243
    win 7 ultimate32bit, Win8.1pro wmc 32bit
       #7

    your laptop may have the ati mobility card or the gforce go series , i am not to clued up on the subsys id thing a member with more experience will give a more exact answer to the card you have ,but either way i dont think you will be able to run aero
      My Computer


  8. Posts : 11
    Windows 7 64 bit
    Thread Starter
       #8

    I just ran the installer again, and recieved a different error along with the one i usually recieve:

    "You are running a 32 bit verson of Nvidia uninstaller on a 64 bit system
    (binary type I386)
    Wrong version of uninstaller. Uninstaller exits now."

    ^ this is the newer error (for clarification)
      My Computer


  9. Posts : 6,243
    win 7 ultimate32bit, Win8.1pro wmc 32bit
       #9

    you may have downloaded the 32bit drivers try the 64bit drivers from the same source ,it is the gforce go series driver you require
      My Computer


  10. Posts : 6,243
    win 7 ultimate32bit, Win8.1pro wmc 32bit
       #10

    are you installing in compatibility mode ? it is a rather old laptop you are using
      My Computer


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:20.
Find Us