Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Need Windows 7 drivers for Canon Powershot SX110 IS

30 Jan 2010   #1

Need Windows 7 drivers for Canon Powershot SX110 IS

I bought a new laptop and my Canon Powershot SX110 IS software does not have a driver for Windows 7. Can someone help me locate the driver or post a link?


My System SpecsSystem Spec
31 Jan 2010   #2

Operating System Microsoft Windows 7 Ultimate Build 7600

Hi willangela,welcome to SevenForums.

According to this .PDF list ( your camera does not require a driver for windows 7.

Visit this page should you require more detailed information :Support - Canon USA Consumer Products

Hope this helps.
My System SpecsSystem Spec
31 Jan 2010   #3


V3xar - Thank you so much for your help. I just took the memory card out and put it in the memory card slot - who knew! Simple solution.

Thanks again
My System SpecsSystem Spec

31 Jan 2010   #4

Windows 7 ultimate 64 bit / XP Home sp3

Welcome to seven forums Willangels: Just so you know next time. whenever you have resolved a problem or see one that is resolved you can click the red triangle and simply write resolved. then the thread will appear with a green check mark so others with the same issue can easily find a thread that has been resolved. Thanks. Fabe
My System SpecsSystem Spec
16 Apr 2011   #5

Windows 7 64 bit

I've been unable to get my images to download on my new Windows 7 computer as I'm used to doing on my rusty trusty XP machine. So far, all I've been able to figure out is that the latest versions of Canon ZoomBroswer do NOT include the CameraWindow utility to easily download photos and video. Windows 7 Professional sometimes does and sometimes does not recognize the camera. Not much help from Canon to date. One tech advised that I had to use an older version of ZoomBrowser if I wanted to use CameraWindow. Another one stated I should delete the existing definition of the camera under hardware manager.
My System SpecsSystem Spec

 Need Windows 7 drivers for Canon Powershot SX110 IS

Thread Tools

Similar help and support threads
Thread Forum
Canon A 40 Powershot and Benq flatbed scanner drivers for Windows 7 64
I'm looking for drivers for Windows 7 for the Canon Powershot A40 camera and for a Benq flatbed scanner. The camera contains precious pics and it would be a pity not being able to download them. Any suggestions?
Windows 7 does not acknowledge my Powershot S20
I've installed Zoombrowser Ex6.6. But it doesn't recognize the camera. I know the camera functions and the USB connection works, because I can plug it into my old computer just fine. Does this system simply not acknowledge the camera? or what do I need to do?
10yr+ old Canon PowerShot S20 + W7 x86 SP1
Hi, I have been using a PowerShot S20 (on and off) for many, many years. Canon offers drivers for Windows 2000 and XP, but not for Vista/7. However, up until a little while ago, I was able to use the camera with Windows 7 without any issues - it got recognized automatically, and a driver was...
Windows 7 Not Recognising Canon PowerShot SD750
I tried to connect my Canon PowerShot SD750 to my machine earlier today in order to transfer some photographs, only to find out that my machine is no longer recognising the camera. It is not showing up under "Devices with Removable Storage" under "Computer," nor does CameraWindow recognise that...
Hardware & Devices
WIA driver for Canon PowerShot SD880
I could not get for W7 x64 the WIA driver for a Canon PowerShot SD880 IS. Any help?
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:20.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App