JMicronŽ JMB363 PATA and SATA controller  


  1. Posts : 255
    Windows 7 Professional 64
       #1

    JMicronŽ JMB363 PATA and SATA controller


    Here is the direct ftp link to JMicronŽ JMB36x PATA and SATA controller drivers:

    Newest version is dated 3/8/2010 version 1.17.55 WHQL

    ftp://driver.jmicron.com.tw/jmb36x/XP_Vista_Win7/

    Changes since last years release:

    R1.17.55WHQL (02/24/2010)

    - Fix issue:
    a. Gigabyte JMB36X External HD recognization problem.

    ---------------------------------------------------------------------------------------------------------------------------------
    R1.17.54WHQL (01/18/2010)

    - Fix issue:
    a. Specific External HDD Box may get disappear and appear again when plug HDD with another port.
    - Caused by the External Box may get re-link with this case.
    - Modify driver to just re-initialize the disk with this case.
    b. Some PMP device may be identified as HDD on specific platforms.
    - The link of the PMP may get lost during Reset procedure and then identify procedure may get problem.
    - Add check for Link lost conditions during Device Identification.
    c. Some PATA HDD may not be recognized correctly with specific PATA Cable.
    - Caused by some Device Status may not be updated correctly to AlternateStatus when using this cable.
    - Check Status in Command Register to avoid this issue.
      My Computer


  2. Posts : 6
    Win7 home premium 64bit
       #2

    Driver install help


    Hi,
    I just got the Jmicron jmb363 eSATA controller card. I am replacing an Adaptec 1225SA card. I am having a hard time installing the drivers. I am running Windows 7 pro x64. At first boot windows installed drivers for this card which I didn't want to do. Now how do I uninstall the windows drivers? I can't find which driver is related to the jmicron. There is no entry in System that says anything like jmicron, etc. i tried installing and uninstalling the drivers on the CD After that and from there web site some times the driver says that it can not detect any device. From the CD it installed the driver but does not recognize any drives attached to the controller card. The computer is a Dell 490 with the Intel 500x chipset. Also, Plug & Play is grayed out in Services to disable windows driver install. I even tried running under admin dirrectly but no difference.

    Any help will be appreciated,

    John Gerard
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Š Designer Media Ltd
All times are GMT -5. The time now is 14:08.
Find Us