New
#21
Cheers for the suggestions.
I've updated some of the specs, as you can tell i'm not really sure exactly what i'm looking for and my computer knowledge is patchy at best.
I've run the CPU-Z test, but not sure where the info you are after is. Under CPU or Mainboard?
Under Mainboard/Motherboard I've got the following:
Fujitsu Siemens
Amilo li 1718
Chipset: ATI, RS400/RC400?RC410
Southbridge: ATI SB400
BIOS:
Brand: Phoenix
Version: V1.9
Date: 11.12.2007
Sorry, not trying to appear rude, just bloody frustrated with this stupid problem! I have a nasty feeling that this is going to result in no solution being found, and me moving back from 7 to Vista again. Annoying because everything else with the computer is running better, and because I doubt i'll get a refund from MS.
"Immediately after the installation they were ok, but since then they've all stopped working"
Tell us exactly what you mean!
Did they stop working after windows connected to internet and installed so-called 'updates'.
What did you install or do between 1st installation and USB not working? What updates/software did you install?
If you have nothing to lose - go back to the first restore point date when you first applied Windows 7 - see if USB returns
Nope, the ports were working for a fair while after i installed windows 7, and i was certainly connected to the internet a lot.
The only software i can think of is microsoft security essentials, but even that was working for a while (can't remember the exact date i installed it, but sure i would have noticed if the ports failed immediately afterward).
I had a look at restoring the system to just after i installed win7, but i couldn't go back far enough - there had already been loads of small windows updates and the restore dates didn't go back far enough. Any thoughts on how i can go back further with the restore?
"The Amilo has very few ports. There's no memory card reader or FireWire port, and no CardBus or ExpressCard expansion slots either. It does have four USB2 ports"
Sound familiar?
Friend with a meter?
Stick a metering tip into the end of a usb lead, see if there is any current coming thru.
(USB = 100 ma + 500 ma versions, with the 100 ma generally being limited to laptops.)
Whip top off laptop and check if there is a loose cable connection (if the USB ports are not soldered to the motherboard.) Can't look it up coz don't know model of motherboard.
Are you plugging a 'known working' USB mouse/item into your laptop??
Reinstall Win 7 from scratch.
Sounds familiar alright, the laptop has practically nothing other than the USB ports!
Don't have a meter available, but think there is current coming thru because when i plug the mouse in, the optical part starts to blink (for around 5 seconds or so) whilst windows determines what it is. Once windows has failed to recognise it, the blinking stops.
I managed to get some details of the motherboard, and posted the info above i think.
Manufacturer: Fujitsu Siemens
Model: Amilo Li 1718
Chipset: ATI, RS400/RC400/RC410
Southbridge: ATI, SB400
Just spent an hour on the phone with MS, who accessed the computer, had a poke around but didn't really try anything new. They also suggested reinstalling the OS. I informed them that i'd bought it over the net, so don't have a disk, and am now expecting a call back from the 'research team' on Monday.
I love Windows 7.
Try pulling electric plug and battery out for couple of mins so there is no power in laptop.
It clears the USB chipset memory.
Try looking here - loads of people have had a USB problem with this laptop motherboard
http://forum.ts.fujitsu.com/forum/vi...p?f=89&t=30298
Look on here for VIA USB Chipset updates for Win 7 - your chipset
http://www.viaarena.com/default.aspx...D=1&CatID=1200
According to a couple of reviews - you have a quality DVD/CD burner built in. don't know about your exact shop model though! should be able to make win 7 bootable disc
Last edited by neo101; 26 Mar 2010 at 16:21.
I had the same exact problem and I unplugged the computer and took the battery out for about a half hour, It worked.
Thanks for help even though i didnt ask the question