Missing drivers

gloss123 · 28 Apr 2010

pebbly said:

gloss123, download this little app it will tell us what devices and mobo you have Speccy - Download :)

Thanks Pebbly, Didnt know if I could upload the speccy snap shots as their file format isnt listed in the upload files so have attached a screen shot of the speccy summary along with a screen shot of the network devices summary.

pebbly · 28 Apr 2010

trying to find the right drivers for you now gloss, but fuji site is real slow so bear with me for a short while :)

theog · 28 Apr 2010

As you have the D1740 mobo, which comes from a X100.

You are downloading the wrong drivers from Fujitsu site.

Unknown device, have a look here.
Hardware Identification

theog · 28 Apr 2010

Found this one, but it is old.

ADMtek AN983 10/100 PCI Adapter - Free software downloads and software reviews - CNET Download.com

pebbly · 28 Apr 2010

gloss, heres the drivers you require support downloads Fujitsu unzip the files you require when you have unzipped them you will have a "setup.exe" file , right click on it > properties>compatibility>select winxp>tick run as admin>apply and ok>exit, right click on the setup.exe file again and select "run as administator :) you need to download the graphics ,sound and lan drivers

gloss123 · 29 Apr 2010

Pebbly/Theog. I know have the correct drivers and everything is working fine. Thanks for all your efforts guys you were a great help.:)

theog · 29 Apr 2010

You are welcome.

One last thing
Do you have a P/N300
OR
X100
OR
a rebuild of both?

pebbly · 29 Apr 2010

gloss123 said:

Pebbly/Theog. I know have the correct drivers and everything is working fine. Thanks for all your efforts guys you were a great help.:)

you're welcome , and thanks to theog for putting me on to the right drivers