Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Leadtek WinFast TV 2000 XP (Deluxe), Windows 7 Pro 64 B

09 May 2010   #11
Deanos

 
 

Are you trying to watch TV or do something else with the card?

I would suggest you start from the beginning again...

Removed and delete any and all drivers for the TV card from your PC.
This includes any software for the card too...

Restart you PC, let windows try and find the card, making sure it doesn't install any drivers.
If it does, then you didn't remove the old ones correctly.

Then manually modify that ini file again, exactly as I did above.

Then manually update the drivers and point them to the folder where the ini file is located.
It should then install the drivers...

Install Dscaler, and make sure to follow ALL the instructions correctly during the initial installation of the software.

It should work just fine from there...


My System SpecsSystem Spec
.
09 May 2010   #12
Fitzcairn

Windows 7 Pro 64 Bits
 
 

Nope the ini file is not intalled properly there is ayellow warning after it's been installed.
My System SpecsSystem Spec
10 May 2010   #13
Deanos

 
 

Then you haven't configure the file correctly...

As I said before...

Remove everything and start again...

Trust me, it works if you just follow the steps carefully...
My System SpecsSystem Spec
.

20 Aug 2010   #14
dlhenke

Windows 7 64Bits
 
 
SOLVED ON W7 64Bits

Try to disable the Driver signature ..
on my W7 64 i need to do that, but only have success disabling driver signature with this Driver Signature Enforcement Overrider 1.3b - NGOHQ.com (dseo )
Now i'm watching my tv, but i can not capture ..

Regards
My System SpecsSystem Spec
15 Nov 2010   #15
pstelmac

Windows 7 Home Premium 64bit
 
 

Hello,
I've just purchased my Win7 and try to follow your instructions. I installed the driver, but I cannot change the Bt848.inf file which is located in:
C:/Windows/System32/DriverStore/FileRepository/bt848.inf_amd64_neutral_1233a628e97127de/
I need to have System Privileges. How did it work for you? Is this the file I have to change? Is there a way to get System Privileges? (I tried but with no luck) My Win7 version is Home Premium, is it of any importance?

Best regards,
Pawel

Quote   Quote: Originally Posted by Deanos View Post

Check your Bt848.inf file and make sure it is set like this:

HKR,"DriverData","Card",0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"DriverData","Tuner",0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"DriverData","HasTDA9855",0x00010001, 0x00, 0x00, 0x00, 0x00
HKR,"DriverData","TVTunerDoesFM",0x00010001, 0x01, 0x00, 0x00, 0x00
HKR,"DriverData","TVAudioUsedForFM",0x00010001, 0x01, 0x00, 0x00, 0x00
My System SpecsSystem Spec
15 Nov 2010   #16
Kari

 

Quote   Quote: Originally Posted by Deanos View Post
You can check the web site here: DScaler - Home
That is most definetely a wrong link, taking you to one of these "Click here for everything" sites.

Correct link here: DScaler - Home
My System SpecsSystem Spec
16 Nov 2010   #17
Deanos

 
 

Quote   Quote: Originally Posted by pstelmac View Post
Hello,
I've just purchased my Win7 and try to follow your instructions. I installed the driver, but I cannot change the Bt848.inf file which is located in:
C:/Windows/System32/DriverStore/FileRepository/bt848.inf_amd64_neutral_1233a628e97127de/
I need to have System Privileges. How did it work for you? Is this the file I have to change? Is there a way to get System Privileges? (I tried but with no luck) My Win7 version is Home Premium, is it of any importance?

Best regards,
Pawel
You need to edit the file before you install it!!!

Check my original post and start from the beginning!

Anyways, that location will always be blocked by windows, and is only a temp storage facility....

Start from the beginning, edit the file first with notepad, then install.

Have fun!
My System SpecsSystem Spec
22 Nov 2010   #18
pstelmac

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Deanos View Post

You need to edit the file before you install it!!!

Check my original post and start from the beginning!

Anyways, that location will always be blocked by windows, and is only a temp storage facility....

Start from the beginning, edit the file first with notepad, then install.

Have fun!
Hello again,

After I had to reinstall Win7, it didn't want to start after disabling driver signature using Driver Signature Enforcement Overrider, I tried to install the drivers again. Here's what I did.

1. On a fresh Win7 I had sth like "video multimedia controller " in "unknown devices". I installed the driver from previously modified .inf file.
2.System said that the driver is unsigned and didn't turn it on.
3. I uninstalled the driver and reinstalled it, but with no luck.
4. I uninstalled it again.
5. I installed the audio driver from the same .inf file, and system accepted it.
6. Reinstallation of video driver was again unsuccessful.

If anything comes to your mind which might help with that, please, don't hesitate.

Regards,
Pawel

btw Here's the answer from Leadtek support, which you probably know already:
Quote:
Dear customer!

Thanks for your contact.
Unfortunately, it has already phased out.
So the chip of it might not be supported to Windows 7.
But you can try to use the driver for Vista to install.
But unfortunately, it doesnít support to 64bit of OS.
And there isnít any chip used for TV200 XP Deluxe that compatible to 64bit OS.
So we might not develop the driver for 64bit OS.
Sorry for your inconvenience.
My System SpecsSystem Spec
23 Nov 2010   #19
Deanos

 
 

This can be a bit tricky to install if you have already tried other drivers....!

Windows 7 "stores" all of it's drivers, whether you remove the device or not.

If you have tried a few other drivers, I would recommend using a package called CCleaner (Piriform - Download CCleaner, Defraggler, Recuva, Speccy - Millions of users worldwide!) and run this to clean out old files and also redundant entries in your registry.

Also make sure that you have totally uninstalled and/or removed any files from the Leadtech install.
This could involve manually cleaning your registry!

Then try everything again.

If it still does not work, then I would suggest a format and re-install of your OS.

This does work, I have it running on Windows 7 x64 and it is working 100%.

Make sure of all the above and then re-install as per the instructions I gave.

Have fun...
My System SpecsSystem Spec
23 Nov 2010   #20
pstelmac

Windows 7 Home Premium 64bit
 
 

Hi,
As I re-read the thread, I think I found out why it didn't work out.
I was using the BtInstaller-amd64-5.3.8.64 while I should have used the btwdmdrv-src5.3.8.64 - is that correct?
Is the file btwdmdrv-src5.3.8.zip ok? As it does not have 64 in its name.

Pawel
My System SpecsSystem Spec
Reply

 Leadtek WinFast TV 2000 XP (Deluxe), Windows 7 Pro 64 B




Thread Tools




Similar help and support threads
Thread Forum
Leadtek Winfast PVR2000 rtm driver
Hi all I have the Leadtek winfast pvr2000 tv card and it works under vista 32b without problems. I installed the seven rtm 32b and I met problems with this card.:cry: Windows 7 freezes with a black screen during channel scan. All is locked, no mouse, and keyboard led doesn't work respond...
Drivers
Leadtek Winfast TV2000XP RM Drivers ?
Is there any way to make TV2000XP RM to work on Windows 7 64-bit Build 7600 ? Drivers for Global and Expert got out but that's another chipset. RM is BT878. If anyone knows how to make this thing started, well, please share that with us :cool:
Drivers
Leadtek Winfast DTV2000H, works in 7100 but not 7201
Hi folks. Great forum! Been reading for a while; first post now. Just upgraded from 7100 to 7201 (x64) and was informed by setup that my Leadtek Winfast DTV2000H TV tuner driver was not compatible. So I moved cxavsvid.sys (CX2388x X64 v5.0.18.6420) to allow setup to proceed. The upgrade process...
Drivers
Leadtek DTV 2000 H, incompatible with Win7! Solutions?
Hello, I recive this reply from Leadtek at my question regarding a Win 7 32 bit driver for DTV 2000 H: Thanks for your contact. Unfortunately, the chipset of it has already phased out. So the chip of it might not be supported to Windows 7. But you can try to use the driver for Vista to...
Drivers
Leadtek winfast a280
anyway I can get my old graphic card to work on windows 7? Ive tried the search and nothing is really showing up. thanks
Graphic Cards
WinFast TV 2000 XP Deluxe Edition // Windows 7
Hi from Poland. Long time ago I bought WinFast TV 2000 XP Deluxe Edition. These days I was using Windows XP and everything was alright, but some time ago I installed Windows 7 and all the TV programmes are black and white and there is no sound at all! I tried the Leadtek official site, but didn't...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 22:36.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App