Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: HL USB RS232 driver

14 May 2010   #11
TheIceman6

Windows 7 - Ultimate
 
 

Thank you so Much, It worked finally

I bought this device before like 4 months and I was going to install windows XP just to install and get it to work.

It worked 100%

Thank you so Much


My System SpecsSystem Spec
.
14 May 2010   #12
pebbly

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

Quote   Quote: Originally Posted by TheIceman6 View Post
Thank you so Much, It worked finally

I bought this device before like 4 months and I was going to install windows XP just to install and get it to work.

It worked 100%

Thank you so Much
you're very welcome ,thank you for posting back and letting us know the outcome
My System SpecsSystem Spec
25 Jun 2010   #13
someon

Windows 7
 
 
exactly the same problem

i have the exact same cable and am running into almost the same problem....have tried countless drivers now, all to no avail.....i followed all these steps as well, and it seemed to get it "closer" to working as it is in my device manager now, but still, when i select update driver, it installs a driver but does not work...
My System SpecsSystem Spec
.

25 Jun 2010   #14
pebbly

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

Quote   Quote: Originally Posted by someon View Post
i have the exact same cable and am running into almost the same problem....have tried countless drivers now, all to no avail.....i followed all these steps as well, and it seemed to get it "closer" to working as it is in my device manager now, but still, when i select update driver, it installs a driver but does not work...
Hi someon, welcome to the forums, have you tried the driver i posted for TheIceman6 ?
My System SpecsSystem Spec
28 Jun 2010   #15
someon

Windows 7
 
 

Yes, I downloaded and ran "CDM20600.exe" (the setup executable you mentioned) and I can see the cable in the device manager but when i try to update the driver it installs the driver but still does not seem to work.....i have searched the internet and have tried countless other options/drivers as well, and still nothing has worked yet....any help would be greatly appreciated!!
My System SpecsSystem Spec
28 Jun 2010   #16
pebbly

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

Quote   Quote: Originally Posted by someon View Post
Yes, I downloaded and ran "CDM20600.exe" (the setup executable you mentioned) and I can see the cable in the device manager but when i try to update the driver it installs the driver but still does not seem to work.....i have searched the internet and have tried countless other options/drivers as well, and still nothing has worked yet....any help would be greatly appreciated!!
hi someon, you may have to install in compatibility mode Compatibility Mode hope that helps
My System SpecsSystem Spec
29 Jun 2010   #17
someon

Windows 7
 
 

Hi Pebbly, yes, i tried in compatibility mode as well (i just tried it again now just to make sure) and still to no avail. I set the compatibility mode up for "CDM20600.exe" and for the driver i obtained, and still it doesn't seem to work.
My System SpecsSystem Spec
29 Jun 2010   #18
pebbly

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

ok someon ,i think what is happenning is Microsoft is installing its own driver when you go to update the driver, have a read and try this Drivers - Turn Off Automatic Driver Installation let us know how you get on
My System SpecsSystem Spec
24 Oct 2010   #19
jeep1943

Windows 7 Starter 32 bit
 
 
Solved USB RS232 driver

G'day chaps. I have a similar problem with the adaptor cable driver. It displays in Device Driver, that is the version that came with adap. but is not WIndows 7 compatible. Downloaded version update suggested (it was 2.08 inlieu 2.06 auto exe). It displays as a program but does not show in Device Manager. Using adaptor to connect Garmin GPS11+ notebook but comp. still cannot find it. Help please for a fairly novice operator. Many thanks
My System SpecsSystem Spec
26 Oct 2010   #20
jeep1943

Windows 7 Starter 32 bit
 
 

Further to my earlier post I have tried the suggestions above, turned off Auto Drivers, Installed in Comp Mode for XP Pro etc. However the original Driver (PL2303 USB to serial) that appeared in Device Manager has now appeared as a "program" in Control Panel/Uninstall programs. I cannot find the installed Driver2.08...(refer above). What am I doing wrong. Again thanks for any help

Update to today's post. When I plug in the cable I can now see USB 2.0 Ser! but with an Exclamation Mark in Device Manager.
My System SpecsSystem Spec
Reply

 HL USB RS232 driver




Thread Tools




Similar help and support threads
Thread Forum
Multiple BSOD. Driver Verifier Driver caught a driver corrupting
I have had BSOD for a while and being super busy I did not have time to look at it and get it fixed. Well Being a computer guy I assumed I could fix it myself. But with tons of research and trying to use every guide I can find I decided to try here(probably should have came here first). Today I...
BSOD Help and Support
Usb to serial rs232 no working drivers
Hello, so I bought cheap usb to rs232 cable off ebay and been trying to get it working. I tried installing many different drivers from internet and still windows is not recognizing my cable. I tried to copy drive file to system32\drivers, no luck. Has anyone else had similar problem? Do I need...
Drivers
No drivers found. click load driver to provide a mass storage driver f
Okay so, my laptop's system is unable to boot, so I just tried to format it since I have to do that for a very long time, and when it asked me in which partition I want to install windows there was nothing, although when I clicked "Load Driver" I could access the hard disk's files, the hard disk IS...
Hardware & Devices
code 10 error,usb to rs232 cable
i am using core 15 processor,dell n4110 laptop,, i tried to connect profolic usb to serial(rs232) cable. i tried in win7 professional and ultimate.in professional i installed but device is not working.. error statement is coming as "this device not srarted(code 10 err0r:cry:)"
Hardware & Devices
RS232 problem
This is for the really old hands...:D Got this Seiko labelprinter on Com4 (hispeed pci serial card). My mobo is Asus P5Q3 wifi-ap deluxe. I am always on a hell of a ride before I get this to work, these are the options shown in device mgr.: bps 9600...115200 (several tried) databits 8...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:31.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App