Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Canon CanoScan N 650U

21 May 2010   #1

Windows 7
Canon CanoScan N 650U

Hello for all.

I need help because I can't find the driver for this Canon scaner CanoScan N 650U. All I can do it was to download the Driver for Win XP. Did sommebody know if it is possible to make it work like in the webcam case.

Best regards,
Bogdan Talpa

My System SpecsSystem Spec
21 May 2010   #2

win7 64bit Ultimate

Sorry there are no drivers available for that model after XP
Out of 8 scanners I only managed to get it to work on 1 so it may be worth a try.
My System SpecsSystem Spec
21 May 2010   #3
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64

If you are running the 64bit 7 that's certainly out of the question while on some occasions the XP drivers may work on the 32bit 7 there. Mostly however you would need at least a Vista update in order to the older model there work.

With the "image unavailable" displayed at the product/support page I have to suspect it was discontinued some time back while still seeing some support. Support - CanoScan N650U - Canon USA Consumer Products
My System SpecsSystem Spec

22 May 2010   #4

windows 7 Pro x64
There you go

That's what you need VueScan Scanning Software for Windows 7, Mac OS X (Snow Leopard) and Linux I have the same scanner from Jurassic Times and this software makes it work on Windows 7 64 bit. Sure it's not free...
My System SpecsSystem Spec
22 May 2010   #5
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64

First off bogdantalpa hasn't specified which flavor of 7 he is running there. Even with the 32bit 7 the support site shows a lack of any Vista updates showing what is available was written primary for 2000, XP, and the older Legacy versions of Windows.

Due to rapid change of model lines and problems with older hardwares, devices with each new version of Windows seen you are likely better off considering going with a newer model that does see Vista, 7 updates right off. The alternative would be finding a different very similar model that does see updates or trying out some generic drivers in the hopes that one of those will work.

Someone seems to have solved the same problem but for Vista however. Review the thread seen at the driverguide site. DRIVER NEEDED: Canon CanoScan N650U (Windows Vista) [USB] - DriverGuide Support Forums Note the thread was from 2008.

At least at the first support page there was some driver sets available while the European site however shows nothing at all. Canon Software Centre - Search results
My System SpecsSystem Spec

 Canon CanoScan N 650U

Thread Tools

Similar help and support threads
Thread Forum
[need driver] Canon CanoScan N1220U
I have a Canon Scanner "CanoScan N1220U" that I used on XP. Looking to get it to work for W7 46-bit. I tried the XP driver, and it says it successfully installed but, but then a pop up comes up and says: LaunchAnywhere GUI has stopped working A problem caused the program to stop working...
Canon Canoscan LiDE 100 software not working on Windows 7 x64
Hello, I have a computer with Windows 7 x64 installed and a Canoscan LiDE 100 from Canon, which has drivers dated from 2008 that work fine. The scan works without a problem. However, the actual Canon software doesn't seem to work with it. Here is the link to it: Canon U.S.A. : Support &...
Trying to use a Canon CanosCan N340P in USB
HI there people!!!! Well, I've recently accyred a parallel to USB cable to conect my CanosCan N340P in my laptop... the problem is that the device is recognized as a "USB Printer compatibility" device instead of a whatever image device or something related... I?m trying to install this in XP...
Hardware & Devices
Canon CanoScan 9900F drivers
Hello Does anybody knows where can i get drives for Canon flatbed scanner CanoScan 9900F for Windows 7 proffesional, or how can I install old Win XP drivers? I've checked official Canon page for drivers but I've found just drivers for windows vista and those cannot be installed.

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:41.
Twitter Facebook