Huawei 169 USB 3g modem  

Page 1 of 5 123 ... LastLast

  1. Posts : 49
    Windows 7 7100 RC 1, Windows Vista 64, Windows XP, MAC OS X 10.5.5
       #1

    Huawei 169 USB 3g modem


    Hi,

    I can't get my Huawei 169 modem to function in Windows 7, I've tried both build 6801 and 6956 -same result

    As soon as I plug the modem in Win7 recognizes it as a usb disk, I can access the disk and launch the on board installer. I've downloaded the latest driver from the Huawei site, but the installer fails with the error "can't find any modem"

    If I do a hardware scan in the device manager only the usb disk turns up, but not the modem.

    I'm using this modem on this laptop in both WinXP and OSX without any problems, so the modem and PC is allright...

    Is there any special windows 7 services that I need to start?

    Any help is welcomed!
      My Computer


  2. Posts : 2,899
    Windows 7 Ult x64(x2), HomePrem x32(x4), Server 08 (+VM), 08 R2 (VM) , SuSe 11.2 (VM), XP 32 (VM)
       #2

    have you checked your device manager if there are any unknown devices
    can you also prt screen your device manager...
      My Computer


  3. Posts : 49
    Windows 7 7100 RC 1, Windows Vista 64, Windows XP, MAC OS X 10.5.5
    Thread Starter
       #3

    Hi,

    no, there's no unknown devices or exclamations in my device manager (one of the first things I checked earlier :) ) Don't know why you want a screen dump of my device manager as it doesn't tell anything.... Even if I do a "hardware scan" from within the device manager the modem doesn't show up, it's like if windows doesn't sense it at all. Funny...

    As I've said before, I know the PC and the modem is OK as it all works if I boot up to XP or OSX. Perhaps MS left out some functionality in the pre-betas

    I found some new vista drivers at the Huawei support site, but that setup fails with the message "can't find the device" (or similar). I've tried to run it in compatibility mode and in admin mode - but it still fails to initialize my modem...
      My Computer


  4. Posts : 2,899
    Windows 7 Ult x64(x2), HomePrem x32(x4), Server 08 (+VM), 08 R2 (VM) , SuSe 11.2 (VM), XP 32 (VM)
       #4

    can i have the link to drivers???
      My Computer


  5. Posts : 49
    Windows 7 7100 RC 1, Windows Vista 64, Windows XP, MAC OS X 10.5.5
    Thread Starter
       #5

    Shure you can I took me forever to locate it on the Huawei web site...

    Huawei Terminal

    I hope you get something from it as I didn't
      My Computer


  6. Posts : 2,899
    Windows 7 Ult x64(x2), HomePrem x32(x4), Server 08 (+VM), 08 R2 (VM) , SuSe 11.2 (VM), XP 32 (VM)
       #6

    i thought these drivers could be extracted.....
    if you a vista OS cd or already have it installed

    List of Supported apps in Windows 7 (6801/6956)

    the one highlighted
    when you install vista install the driver and back that one up...
    then restore it in vista
      My Computer


  7. Posts : 1,519
    El Capitan / Windows 10
       #7

    Mindstorm said:
    Shure you can I took me forever to locate it on the Huawei web site...

    Huawei Terminal

    I hope you get something from it as I didn't
    Its a USB device:



    As such it will not show up in device manager. Attach the device and look in Control Panel\Hardware and Sound\Devices and Printers to see if the device appears there. You can then run the UTPS11.030.01.04.03.B409.exe you downloaded from the Huawei site as administrator by right clicking it and selecting "Run as Administrator". That should allow the installation wizard to find the USB device when it searches for it. Since it also has a microSD slot it will have to be installed by Windows as a composite USB device first and then as a communications controller and mass storage controller and whatever else it does. Let me know how this works out for you.

    darkassain said:
    i thought these drivers could be extracted.....
    if you a vista OS cd or already have it installed

    List of Supported apps in Windows 7 (6801/6956)

    the one highlighted
    when you install vista install the driver and back that one up...
    then restore it in vista
    Highlighted? Maybe by your browser search. What are you referring to? Driver Max?
    Last edited by johngalt; 16 Dec 2008 at 23:06.
      My Computer


  8. Posts : 2,899
    Windows 7 Ult x64(x2), HomePrem x32(x4), Server 08 (+VM), 08 R2 (VM) , SuSe 11.2 (VM), XP 32 (VM)
       #8

    baarod said:
    It's a USB device:



    As such t will not show up in device manager. Attach the device and look in Control Panel\Hardware and Sound\Devices and Printers to see if the device appears there. You can then run UTPS11.030.01.04.03.B409.exe you downloaded from the Huawei site as administrator by right clicking it and selecting "Run as Administrator". That should allow the installation wizard to find the USB device when it searches for it. Since it also has a microSD slot it will have to be installed by Windows as a composite USB device first and then as a communications controller and mass storage controller and whatever else it does. Let me know how this works out for you.
    i knew that....
    thats why i asked him for the link
    that explains why it is seen as a removable drive
    what i meant is to install it first (get it working) and keep it there then run drivermax it should show up then back only that driver...

    baarod said:
    Highlighted? Maybe by your browser search. What are you referring to? Driver Max?
    sorry and yes i am referring to drivermax
    Last edited by johngalt; 16 Dec 2008 at 23:07.
      My Computer


  9. Posts : 1,519
    El Capitan / Windows 10
       #9

    That oughta work if the installer borks in 7. As long as it can find the composite root driver the rest should be easy...
      My Computer


  10. Posts : 2,899
    Windows 7 Ult x64(x2), HomePrem x32(x4), Server 08 (+VM), 08 R2 (VM) , SuSe 11.2 (VM), XP 32 (VM)
       #10

    baarod said:
    That oughta work if the installer borks in 7. As long as it can find the composite root driver the rest should be easy...
    yes you are right since the driver for the micro sd slot is installed then its not the hardware (or there is little chance) that the modem itself is damaged...


    im hoping he tried the compatibility mode and run as admin already
    but only mindstorm can confirm
    Last edited by darkassain; 13 Dec 2008 at 22:21.
      My Computer


 
Page 1 of 5 123 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 16:03.
Find Us