Windows 7 Ultimate 64bit and Swann PCI TV Card

CubeBurn · 21 Jul 2010

Hey all, I've got a Swann PCI TV Tuner Card that allows me to watch and record analogue TV along with the ability to rrecord S-Video and RCA Video Input, but it's not installing correctly.

I have the card plugged into PCI and ran the software that came with it to install the drivers. It said "Can't verify driver publisher, Continue?" and I chose continue while installing. After that, I rebooted and it still says that it still can't find software for the card.

Here's some screenshots of the device manager stuffs:

Apparently it's a TSUNG Labs chipset or Conexant decoder thing... Not sure. Can you shine some light?

Cheers,
CubeBurn

thefabe · 21 Jul 2010

Welcome to Seven Forums. I found a swann ftp site their are dirvers you may want to try. Most likely you'll need to try them in compatibility mode XP or Vista, however I wouldn't count on them having a 64 bit driver but here's the site ftp://ftp.swann.com.au/drivers/ Good luck. Please post back. Compatibility Mode Fabe

thefabe · 21 Jul 2010

ftp://ftp.swann.com.au/drivers/tvtuner/ Here is the drover I found.I'm having trouble Copying and Pasting your screenshot of your hardware id string. If you don't mind reposting it without the highlighted string it might make it easier then having to type in the stringini the search engine. If it is a conexant chip we may ne able to find one from another manufacturer that will work. I find these tuner cards a bit more difficult nut to crack. Thanks. Fabe

CubeBurn · 21 Jul 2010

Okay, here's the strings again, without the highlight & also supersized:

Hope that helps. :)

Thanks again, Fabe. :)

thefabe · 21 Jul 2010

Your welcome but I'm not coming up with anything new. You wouldn't happen to still have the oriignal install disk would you? Have you tried the Swann site?http://www.swannsecurity.com/s/produ...w/?product=529 might want to pull t out and get the model # off it could help. fabe

CubeBurn · 21 Jul 2010

Hm, okay, I can see your point. I'll boot into Linux Mint 9 and get the Model of the card, it'll be listed as Conexant 209x or something. Will post back with more info.

CubeBurn · 23 Jul 2010

Found out some more info about the card:

The PCI Board says:

WF-250TV VER2.1
TNF 9535 B/IF
WFTV2500506077

I think that'll help... Somewhat.