Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: JC2 out of range

26 Aug 2010   #1

Windows 7
JC2 out of range

People I just bought my POV GTX 465 and played Just cause 2 fine but after a few days when i played JC2 the screen turned black and says

out of range


but i can still hear the music and stuff
Anyone help

My System SpecsSystem Spec
26 Aug 2010   #2

Windows 7 Home Premium x64

I assume that you need to correct the resolution of the game to match that of your monitor, I don't know if and why it has anything to do with the GTX 465.
If you cannot change the res via main menu, poke around the install folder and see if some .ini files contain the information about the resolution and change it manually via Notepad.
My System SpecsSystem Spec
27 Aug 2010   #3

Windows 7

I didn't found any .ini files i think i'll reinstall it
My System SpecsSystem Spec

27 Aug 2010   #4

Systems 1 and 2: Windows 7 Enterprise x64, Win 8 Developer

This is a quote from:

Wont Run BF2 Just cause i switched my monitor?! [Archive] - CamaroZ28.Com Message Board

"Ok what we need to do is get your refresh rate set back to 60. Go to your My Documents\Battlefield 2\ folder and make a quick backup by copying everything in there to another location just for safe measure. Now that it is backed up, go into the "Profiles" folder. there is a default folder with several .con files in it. Open up the file "Video.con" with windows notepad and change the line:

VideoSettings.setResolution 1024x768@85Hz
to the following:
VideoSettings.setResolution 1024x768@60Hz

with the 1024x768 number being whatever resolution you want to run the game at. Also, you will notice in the profiles folder there is at least one folder called "0001", and possible 0002, 0003 etc depending on how many people have logged into that machine and played. Go into each of those numbered folders and change the video.con to 60hz exactly like you did before. Run the game."
My System SpecsSystem Spec
29 Aug 2010   #5

Windows 7 Ultimate 64 bit

looks like you having a problem with that cause either your video-card ir minitor has a limited resolution display this is usually happens when setting up the game resolution at very high

to solve this

try deleting your save game setting located at MyDocuments/Square Enix/Just Cause 2/Saves/JC2Settings
create a backup first now go play the game and don't try not to set your resolution too much higher
My System SpecsSystem Spec

 JC2 out of range

Thread Tools

Similar help and support threads
Thread Forum
Ivy CPU temperature range...
This is more of a question than actual issue... First time around with the Ivy CPU (i5-3353P) with Zalman CNPS9500 heatsink, currently being bench tested. The processor is working just fine, albeit not noticably faster than the i5-760 CPU. The older processor had Noctua NH14 heatsink with...
Hardware & Devices
new build out of range :(
my last computer died,so i got one built today,nothing fancy,cheap and cheerful, when i brought it home and plugged it in,it went great,i never adjusted anything then i restarted and got the dreaded out of range:mad: i tryed safe mode and changing the resolution but when i restart:out of range i...
Graphic Cards
Monitor out of range
I have been using Vista Home Premium 32 bit with a main monitor 32"TV and a secondary monitor - a 17" LCD PC monitor. Having transferred to Windows 7 on a new PC the secondary monitor now shows "out of range" on its screen. Can anyone tell me why this has happened. It is in the same place as...
Hardware & Devices
HDMI out of range
Computer is running Win 7 Enterprise (64-bit) I have a dual-monitor set up. My main monitor is a 25.5" Widescreen Westinghouse L2610NW. Im running it on HDMI 1920x1080p (32-bit color) 60hz (its native resolution is 1920x1200, but only if I use the VGA channel, which I am not.) My 2nd monitor is a...
Graphic Cards
Out Of Range
Right guys My primary display works fine @ 1024x768 if I try to duplicate or extend to the 2nd they both go out of range. However I can duplicate them @ 800x600 but no extend @ this resoulution. I have the latest drivers from Nvidia site Any ideas???
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:01.
Twitter Facebook Google+