Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: There is a problem with the interface in Windows 7.

30 Jun 2011   #11

windows 7 Home Premium 64bit.

177 dayss.... -______________-

okay so this will probably help with anyone with the border dragging problem these kids were talking about...

the dwarf guy is actually right.

I had the same problem and i did what he said

Click and type View advanced system settings into the search box and press enter/return. Provide administrative credentials at the prompt. Under Performance click on Settings... Ensure that Show window contents while dragging is checked, as shown here. Click OK twice to close the dialogue panels. If the change does not take place straightaway, log off and back on again or restart your machine.
but window contents when dragging was on..

so i turned it off, clicked apply, OK, OK.

then i went back to the same place and turned it on again..

apply, OK, OK.

and then its fixed

My System SpecsSystem Spec
30 Jun 2011   #12

Windows 8.1 Pro RTM x64

You're welcome, mrsteaze and welcome to Windows 7 Forums

Sometimes the setting shown is correct, but the associated behaviour is not. In these cases, toggling the setting should get them back in sync again.
My System SpecsSystem Spec

 There is a problem with the interface in Windows 7.

Thread Tools

Similar help and support threads
Thread Forum
IEEE Interface Problem with Windows 7 (64 bit)
Hello Forum, I am experiencing what appears to be connectivity problems between my system and IEEE (Firewire) cards / devices. I have just purchased / installed a “SYBA Firewire PCIe x1, 3-port 1394a” card. My system successfully installed the driver(s) and detects the card in the Device...
Hardware & Devices
SONY HandyCam Model# DRC-TRV22 IEEE Interface Problem with Windows 7
Hello Forum, I have a SONY DRC-TRV22 HandyCam connected to my system via IEEE 1394 (FireWire). I know that Windows 7 does not support the device connected via USB. For some reason the IEEE card (SIIG 3-port 1394 (FireWire) I/O card Model NN-300012-S6) is recognized by the system, but the...
Hardware & Devices
Error No such interface supported problem windows 7
Well i came across this issue yesterday, when i press start and click any catagory for example Music,photo,documents,etc it gives me this error "no such interface supported" so that leads me to Not able to access icons ANYWHERE for example desktop, taskbar icons TURNED black and at the end it says...
General Discussion
Problem with Intel Management Engine Interface
Everytime I start up the computer and check device manager, there are yellow exclamation marks on my network adaptor and Intel Management Engine Interface error. It says that the device cannot start (code 10). However this all goes away when I restart the computer; but happens again when I "shut...
Hardware & Devices
Problem with software interface language other than english
I recently downloaded a software which interface is written in Bulgarian and when I open it all the buttons and menus instead of appearing in Cyrillic are a string or question marks such as ?????? whose count depends on the length of the word in Bulgarian. Does anybody know how to fix that so they...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 00:49.
Twitter Facebook Google+