Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: [Problem] "Repair Your Computer"

18 Jan 2011   #1
restacio

Windows 7 Professional x64
 
 
[Problem] "Repair Your Computer"

Brief introduction:
I'm Rob and I'm literally new in this forum (haven't done any searches to my problems as of now) and would like to have some help regarding my current 3 problems in my main computer (OS-related?). I'll do some searching here when I get some time, probably tomorrow (2:00am here already)

I decided to create 3 separate thread for my 3 problems but I'll insert the links here.
I hope it's okay for the administrators.

[Problem] "Check for solutions"

https://www.sevenforums.com/general-d...ml#post1190630

If any details are needed, just ask me

===============================================================

Repair Your Computer

Some details:
3 current partition: C:\ F:\ and L:\
1 DVD-ROM: E:\
1 virtual BD-ROM: D:\

Last weekend, I scanned 5 HDD from my other computers since it's busted. 2 of which cannot be accessed anymore (it can't be read). I used a USB-to-IDE device in order for me to access all 5 HDD and have a scan. I had a problem accessing the 2 HDD but eventually I have saved it by formatting it after it got detected by my main computer. Whenever I scan, I always go to Safe Mode since I have read somewhere that it stops viruses from being "active." So I used MSE together with MBAM and SAS.
Safe Mode -> Scan HDD1 -> Restart -> Safe Mode -> Re-scan HDD1 -> Scan main computer -> Restart -> Safe Mode -> Scan HDD2 -> and so on
During my first Restart and going back to Safe Mode, I noticed that a new Option was added after pressing F8 (what's the proper term for this procedure?): it's "Repair Your Computer" being on top of "Safe Mode." I did not mind it until after I scan my main computer, restarted, go to safe mode and it's still there so what I did is choose it (I got curious). I tried Startup Repair Diagnosis (or something, I can't remember right now) it as well as diagnose/repair the memory. The memory seemed okay, no log whatsoever but the Startup Repair Diagnosis has one. I'll post it later so you guys could interpret it if it's okay.

Here's the log
Quote:
Startup Repair diagnosis and repair log
---------------------------
Last successful boot time: ‎1/‎15/‎2011 6:56:29 AM (GMT)
Number of repair attempts: 1

Session details
---------------------------
System Disk = \Device\Harddisk0
Windows directory = E:\Windows
AutoChk Run = 0
Number of root causes = 1

Test Performed:
---------------------------
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms

Test Performed:
---------------------------
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms

Test Performed:
---------------------------
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 94 ms

Test Performed:
---------------------------
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 16 ms

Test Performed:
---------------------------
Name: Target OS test
Result: Completed successfully. Error code = 0x0
Time taken = 78 ms

Test Performed:
---------------------------
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken = 140 ms

Test Performed:
---------------------------
Name: Boot manager diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms

Test Performed:
---------------------------
Name: System boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms

Test Performed:
---------------------------
Name: Event log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 78 ms

Test Performed:
---------------------------
Name: Internal state check
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms

Test Performed:
---------------------------
Name: Boot status test
Result: Completed successfully. Error code = 0x0
Time taken = 31 ms

Root cause found:
---------------------------
Boot status indicates that the OS booted successfully.

---------------------------
---------------------------
===============================================================


My System SpecsSystem Spec
.
19 Jan 2011   #2
Johnathan Lyman

Windows 7 Ultimate 64-bit
 
 

Rob,

No worries. You're just fine. It's normal for that to appear. How it gets there is beyond me but all of my machines have it when I press F8.
My System SpecsSystem Spec
Reply

 [Problem] "Repair Your Computer"




Thread Tools




Similar help and support threads
Thread Forum
"My Computer"/"Computer" slow load problem
Sometimes when I try to open the Computer window (either by clicking the start button and then Computer or hitting Windows key + E) it will take a long time to open (upwards of 90 seconds). It doesn't happen all of the time, but starts happening seemingly at random. I can open other folders, but as...
Performance & Maintenance
Older Computer repair help! "164-Memory Size Error"Another weird prob!
Hello! I've been having this problem for awhile now, ever since I started repairing an old 2000-2005 pc. Not sure on how old, but old. I'd say at least a decade by the old ribbon cables and the DDR DIMM memory. I have two very similar builds of this. Both have a single core intel pentium processor...
Hardware & Devices
F8 "Repair your computer" stops working with 0xc000000e
hi all I am new to this forums and here is my question. I tried to verify whether the F8 restore factory function is working in my dell inspiron 1545. I got this error - Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem: 1. Insert...
General Discussion
Unmountable Boot Drive BSOD + Windows 7 "Repair Your Computer" problem
When booting with the option "Don't auto restart on system failure", I get a BSOD telling me of an Unmountable Boot Drive. I tried using the "Repair Your Computer" option with the Windows 7 installation disk, but after selecting my language and clicking "Repair Your Computer", the GUI disappears...
BSOD Help and Support
"Repair Your Computer" option not working (restoring factory backup)
I have a Dell Studio 1440 with Win 7 home premium 64bit. I want to use the built-in recovery but after pressing F8, I click on Repair Your Computer and Windows 7 begins to load instead of going to the recovery GUI. I am trying to restore the system to it's factory settings and it had worked...
Installation & Setup
"Startup repair cannot repair this computer automatically"
problem details: Problem signature Problem Event name : StartupRepairOffline Problem signature 01 : 6.1.7600.16385 Problem signature 02 : 6.1.7600.16385 Problem signature 03 : unknown Problem signature 04 : 21200977 Problem signature 05 : External media Problem signature 06 : 6 Problem...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:22.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App