Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: error

17 Mar 2011   #11
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

brinks tutorial will explain it go to this link >>> How to Extend a Partition or Volume in Windows 7 Partition or Volume - Extend


My System SpecsSystem Spec
.
17 Mar 2011   #12
saurav Gautam

Windows 7 Ultimate x86
 
 

I know how to increase partition but it didnt work this time.
and i have already mentioned the type of problem on previous comments/
Has my hard drive been damaged?
My System SpecsSystem Spec
17 Mar 2011   #13
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

its a possibility. run a disc check also run a SFC Scan this may help

Perform a SFC Scan

1. Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow

2. Type the following command, sfc /scannow and then press ENTER:

(A message will appear stating that 'The system scan will begin'. Be patient because the scan may take some time)

3. If any files require a replace SFC will replace them. You may be asked to insert your Windows 7 DVD for this process to continue

4. If everything is okay you should, after the scan, see the following message "Windows resource protection did not find any integrity violations"

5. After the scan has completed, close the command prompt window, restart the computer. (TIP repeat scan minimum 3 times)
My System SpecsSystem Spec
.

17 Mar 2011   #14
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

what size is the hard drive? (to help the forum its good to fill out your system specs so problems can be solved more easily this program will help >>> Speccy - System Information - Free Download )
My System SpecsSystem Spec
17 Mar 2011   #15
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

Quote   Quote: Originally Posted by saurav Gautam View Post
I am facing problem with my hard drive.
One of the drive of my hard disk (:f) doesnt work.
After i open "MY COMPUTER" it doesnt show drive f:

I tried to find it by booting from windows-7 dvd. There i could see drive f: in the list of other drives but i was not able to either format it or delete it or create a new partition from it. My 100 Gb space is lost. it just shows UNALLOCATED SPACE.


The code error is Error:0x8004240f
please help me find the solution of this
you could try this fix How to fix 0X8004240F Error? >>> http://www.wiki-errors.com/wiki-erro...iki=0X8004240F

1) Download http://www.wiki-errors.com/download.php
2) Install program and click Scan button.
3) Click the Fix Errors button when scan is completed.
4) Restart your computer.
My System SpecsSystem Spec
17 Mar 2011   #16
saurav Gautam

Windows 7 Ultimate x86
 
 

My hard disk size is 320 gb...... Ok friends. I shall try all the instructions given by you tonight. If the problem didnt get fixed yet then i will come upto you again. Thank you for your replies. The problem was strange for me in the whole life.
My System SpecsSystem Spec
17 Mar 2011   #17
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

Quote   Quote: Originally Posted by saurav Gautam View Post
My hard disk size is 320 gb...... Ok friends. I shall try all the instructions given by you tonight. If the problem didnt get fixed yet then i will come upto you again. Thank you for your replies. The problem was strange for me in the whole life.
ok do run the fix i posted
My System SpecsSystem Spec
17 Mar 2011   #18
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

CHKDSK

Open the Computer option from the start menu, which will display all of the drives available to scan on your PC:
Then, right click on the drive you wish to scan for errors and select Properties:
Now click the Tools menu, then Check Now under the error-checking section:

You have several options within the check disk tool. It is always recommended you leave the "automatically fix file system errors" box checked, as this repairs and problems found. If you want to perform a deeper scan, tick "scan for and attempt recovery of bad sectors". This second option takes longer, but is worth doing if you suspect a drive problem. Once you are configured, click Start:
If you try to check a disk that is currently in use, you will receive a message asking if you wish to schedule a scan. Accepting this will perform the scan next time you restart your PC:
My System SpecsSystem Spec
Reply

 error




Thread Tools




Similar help and support threads
Thread Forum
Burnt out from error error error! Time to go back to Paper.
Hello there. I have been redirected here by jamanji, whom has been most helpful by the way. My PC crashed a little over a week ago. Rather than retype everything, I would like to give you the link to my post. I am not 'Tech' per se, but I would like to try and resolve my problem myself, To...
System Security
Error 41, Error 1001 and error 6008.
Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots. I've updated all my drivers. Tested my memory. Tested my RAM. Run a...
BSOD Help and Support
Error copying file: Data error (cyclic redundancy check). CRC Scan ?
Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks HDDStatus - Tool to check hard disk status, health and reliability Hey, I've been using GoodSync for the...
Backup and Restore
BSOD by ntoskrnl.exe, error d1, error 3b, error 1a
I've just install windows 7 home premium 64bit and got 4 times of BSOD. for the first time error code is 0x0000001a for the 2nd time error code is 0x0000003b for the 3rd time error code is 0x0000003b for the 4th time error code is 0x000000d1 I also attach minidump files and text files that...
BSOD Help and Support
Scan Error Error while Scan::0::LEAD Error: Twain source manager no
hi.... i have promblme , i do not know how to fix it.. i have kodak scnners i1220 plus i have RD Web Access the promblme is.. I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message (Scan Error Error while...
Hardware & Devices
BSOD error.. Restarts, but power button stays on, graphics card error?
Hey guys, i want to thank you ahead of time for helping me. This BSOD is a pain in the butt. Intel Pentium 2.8GHZ RAM 3.5 32 bit OS Intel GG965 Express Chipset Family I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:46.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App